|
|
REVERSE AND OVERDRIVE CLUTCH TSB Revision AUTOMATIC TRANSAXLE OVERHAUL 23B-53 >>C<< CLUTCH PLATE/CLUTCH DISC/CLUTCH REACTION CAUTION Immerse the clutch disc in ATF before assembling it. top of the other inside the underdrive clutch retainer. All four 2. Install the clutch reaction plate in the direction shown. In the same way as the clutch plates, assemble them so that >>D<< SNAP RING INSTALLATION 2. Set special tools MB991628 <F4A42>, MB991629 <F4A51> and MD998924 as shown in the illustration, and then 3. Check that the clearance between the snap ring and the clutch reaction plate is within the standard value. If not within Standard value: 1.6 −−−− 1.8 mm (0.0630 −−−− 0.0709 inch) REVER SE A ND O VERD R IVE CLUTC H DISASSEMBLY AND ASSEMBLY M1233024800020 NUMBER OF CLUTCH DISCS AND PLATES AKX01044 B A AB AKX01105 CLUTCH PLATES ROUNDED EDGE PISTON CLUTCH DISCS AB CLUTCH AKX01045 MB991628 MD998924 AB MODEL PRESSURE CLUTCH DISC CLUTCH PLATE CLUTCH REACTION Over drive clutch F4A42 - 4 4 1 F4A51 1 4 3 1 Reverse clutch - 2 2 1 |