|
|
DIAGNOSIS TSB Revision CONTROLLER AREA NETWORK (CAN) 54C-233 STEP 21. Check the wiring harness between joint voltage at the wiring harness side of joint connector (2) Turn the ignition switch to the ON position. terminal 5 and body ground. OK: 4.7 V or less (4) Measure the voltage between joint connector (CAN1) terminal 16 and body ground. OK: 4.7 V or less Q: Do all the voltages measure 4.7 V or less? YES (vehicles without satellite radio) : Go to Step 24. AC608178 TEST Harness side: C-105 BV AC608178 Harness side: C-105 BW TEST |