Mitsubishi 380. Manual - part 123

 

  Index      Mitsubishi     Mitsubishi 380 - service repair manual 2005 year

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  121  122  123  124   ..

 

 

Mitsubishi 380. Manual - part 123

 

 

ON-VEHICLE SERVICE

SIMPLIFIED WIRING SYSTEM (SWS)

54B-489

Keyless entry and 
power door lock 
system

Keyless entry system confirmation 
by horn

The horn answerback honking conditions can 
be set in the following ways.

a. Horn sounds
b. Horn sounds if doors are already locked
c. Horn does not sound (default)

Keyless entry system confirmation 
by turn-signal lamps

The hazard answerback flashing conditions 
can be set in the following ways.

a. Locking and unlocking (default)
b. Locking only
c. Unlocking only
d. No indication

Time until automatic relocking after 
unlock operation using keyless 
entry system

The timed lock period after unlocking with the 
keyless entry transmitter can be set to the 
following times.

a. 30 seconds (default)
b. 60 seconds
c. 120 seconds
d. 180 seconds

Unlock operation using keyless 
entry system or door key

The unlocking operations after unlocking with 
or without a key can be set in the following 
ways.

a. Unlock driver's door on first unlock 

operation, and unlock all doors on second 
unlock operation (default)

b. Unlock all doors on first unlock operation

Buzzers

Turn-signal buzzer

The turn-signal buzzer function can be 
activated or deactivated. (OFF by default)

Door-ajar warning buzzer

The door ajar warning buzzer function can be 
activated or deactivated (ON by default).

Default

Initialization of above mentioned functions

ITEM (multi-center display)

ADJUSTMENT DETAILS

52A-1

GROUP 52A

INTERIOR

CONTENTS

GENERAL DESCRIPTION. . . . . . . . .

52A-3

SEAT BELT DIAGNOSIS. . . . . . . . . .

52A-3

SPECIAL TOOLS. . . . . . . . . . . . . . . .

52A-3

INSTRUMENT PANEL ASSEMBLY*.

52A-4

REMOVAL AND INSTALLATION . . . . . . . . 

52A-4

DISASSEMBLY AND ASSEMBLY . . . . . . . 

52A-9

FLOOR CONSOLE ASSEMBLY . . . .

52A-10

REMOVAL AND INSTALLATION . . . . . . . . 

52A-10

TRIMS . . . . . . . . . . . . . . . . . . . . . . . . .

52A-11

REMOVAL AND INSTALLATION  . . . . . . . . 

52A-11

DOOR TRIM  . . . . . . . . . . . . . . . . . . . .

52A-14

REMOVAL AND INSTALLATION  . . . . . . . . 

52A-14

DISASSEMBLY AND ASSEMBLY  . . . . . . . 

52A-17

HEADLINING  . . . . . . . . . . . . . . . . . . .

52A-19

REMOVAL AND INSTALLATION  . . . . . . . . 

52A-19

INSIDE REAR VIEW MIRROR . . . . . .

52A-20

Continued on next page

WARNINGS REGARDING SERVICING OF SUPPLEMENTAL RESTRAINT SYSTEM (SRS) EQUIPPED VEHICLES

WARNING

Improper service or maintenance of any component of the SRS, or any SRS-related component, can lead to 
personal injury or death to service personnel (from inadvertent firing of the air bag) or to the driver and 
passenger (from rendering the SRS inoperative).

Service or maintenance of any SRS component or SRS-related component must be performed only at an 
authorized MITSUBISHI dealer.

MITSUBISHI dealer personnel must thoroughly review this manual, and especially its GROUP 52B - Supplemental 
Restraint System (SRS) before beginning any service or maintenance of any component of the SRS or any 
SRS-related component.

NOTE
The SRS includes the following components: SRS air bag control unit, SRS warning light, front impact sensors, air bag module,
clock spring, and interconnecting wiring. Other SRS-related components (that may have to be removed/installed in connection
with SRS service or maintenance) are indicated in the table of contents by an asterisk (*).

Battery posts, terminals and related accessories contain lead and lead compounds. WASH HANDS 
AFTER HANDLING.

WARNING

HOME

INTERIOR

52A-2

FRONT SEAT ASSEMBLY*  . . . . . . .

52A-21

REMOVAL AND INSTALLATION . . . . . . . . 

52A-21

INSPECTION  . . . . . . . . . . . . . . . . . . . . . . . 

52A-23

POWER SEAT CONTINUITY AND
DIAGNOSTIC CHECKS . . . . . . . . . . . . . . . 

52A-23

OPERATION CHECK OF POWER
SEAT MOTOR  . . . . . . . . . . . . . . . . . . . . . . 

52A-29

MEMORY SEAT CONTROLLER (MSC). . . 

52A-31

DISASSEMBLY AND ASSEMBLY RH SIDE

52A-33

DISASSEMBLY AND ASSEMBLY LH SIDE

52A-37

REMOVAL SERVICE POINT . . . . . . . . . . . 

52A-42

FRONT SEAT TRIM COVER
REMOVAL AND FITMENT . . . . . . . . . . . . . 

52A-43

REAR SEAT CUSHION TRIM COVER
REMOVAL AND FITMENT . . . . . . . . . . . . . 

52A-46

REAR SEAT BACK TRIM COVER

REMOVAL AND FITMENT  . . . . . . . . . . . . . 

52A-49

REAR SEAT ASSEMBLY. . . . . . . . . .

52A-55

REMOVAL AND INSTALLATION  . . . . . . . . 

52A-55

DISASSEMBLY AND REASSEMBLY . . . . . 

52A-57

FRONT SEAT BELT* . . . . . . . . . . . . .

52A-58

REMOVAL AND INSTALLATION  . . . . . . . . 

52A-58

INSPECTION. . . . . . . . . . . . . . . . . . . . . . . . 

52A-59

REAR SEAT BELT . . . . . . . . . . . . . . .

52A-59

REMOVAL AND INSTALLATION  . . . . . . . . 

52A-59

SPECIFICATIONS  . . . . . . . . . . . . . . .

52A-60

FASTENER TIGHTENING 
SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . 

52A-60

GENERAL DESCRIPTION

INTERIOR

52A-3

GENERAL DESCRIPTION

M1521000100184

OPERATION

.

Seat belt warning system

If the driver turn the ignition switch to the "ON" posi-
tion without fastening the seat belt, the seat belt 
warning light illuminates.

SEAT BELT DIAGNOSIS

M1523000700182

The seat belt warning system is controlled by the 
Simplified Wiring System (SWS). For troubleshoot-
ing, refer to GROUP 54B, SWS diagnosis 

P.54B-101

.

SPECIAL TOOLS

M1521000600327

TOOL

TOOL NUMBER AND 
NAME

SUPERSESSION

APPLICATION

MB990784
Ornament remover

General service 
tool

Removal of switch, trim, 
etc.

MB990784

 

 

 

 

 

 

 

Content   ..  121  122  123  124   ..