|
|
Content .. 1395 1396 1397 1398 ..
TM-280 < REMOVAL AND INSTALLATION > [5AT: RE5R05A] TRANSMISSION ASSEMBLY INSTALLATION Install the removed parts in the reverse order of the removal, while paying attention to the following work. fixing bolts in accordance with the following standard. • Align the positions of tightening bolts for drive plate with those of the torque converter, and temporarily tighten the bolts. Then, CAUTION: • When turning crankshaft, turn it clockwise as viewed from the front of the engine. • When tightening the tightening bolts for the torque converter after fixing the crankshaft pulley bolts, be sure to confirm the . • After converter is installed to drive plate, rotate crankshaft several turns and check to be sure that A/T rotates freely with- • Install crankshaft position sensor (POS). Refer to AWD : Inspection INFOID:0000000000957185 INSPECTION AFTER INSTALLATION • Installation and Inspection of Torque Converter tance (A) to ensure it is within the reference value limit. • After completing installation, check the following item. - A/T position. Refer to TM-230, "AWD : Inspection and Adjustment" A : View from vehicle front : Transmission to engine : Engine to transmission Bolt No. B C Number of bolts 8 4 Bolt length 65 (2.56) 35 (1.38) Tightening torque 75 (7.7, 55) 46.6 (4.8, 34) JPDIA0043ZZ JPDIA0044ZZ B : Scale C : Straightedge Distance (A) : Refer to JPDIA0042ZZ |