Hyundai Elantra Touring (2012 year). Instruction - part 11

 

  Index      Hyundai     Hyundai Elantra Touring - instruction 2012 year in english

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  9  10  11  12   ..

 

 

Hyundai Elantra Touring (2012 year). Instruction - part 11

 

 

Features of your vehicle
If you are driving on a mountain road
Care of disc (if equipped)
• Depending on the type of CD-R/CD-
where is blocked by mountains.
RW CDs, certain CDs may not operate
If the temperature inside the car is too
normally depending upon manufactur-
high, open the car windows for ventila-
tion before using your car audio.
ing companies or processes and
recording methods. In such circum-
It
is illegal to copy and use
stances, if you still continue to use
MP3/WMA/AAC/WAVE files without
those CDs, they may cause the mal-
permission. Use CDs that are created
function of your car audio system.
only by lawful means.
Do not apply volatile agents such as
benzene and thinner, normal cleaners
NOTICE - Playing an
Incompatible Copy-Protected
and magnetic sprays made for ana-
logue discs onto CDs.
Audio CD
Some copy protected CDs, which do not
To prevent the disc surface from get-
comply with the international audio CD
ting damaged, hold and carry CDs by
SATELITE2
standards (Red Book), may not play on
the edges or the edges of the center
your car audio. Please note that if you
hole only.
If you are driving in an area with tall
try to play copy protected CDs and the
Clean the disc surface with a piece of
trees that block the signal(10m or
CD player does not perform correctly,
soft cloth before playback (wipe it from
more), for example on an road that
the CDs maybe defective, not the CD
the center to the outside edge).
goes through a dense forest.
player.
Do not damage the disc surface or
The signal can become weak in some
attach pieces of sticky tape or paper
areas that are not covered by the
onto it.
repeater station network.
Make sure nothing other than CDs are
inserted into the CD player (Do not
Please note that these may be other
insert more than one CD at a time).
unforeseen circumstances when there
Keep CDs in their cases after use to
are problems with the reception of XMTM
satellite radio signal.
protect them from scratches or dirt.
4 103
Features of your vehicle
RADIO, VOLUME CONTROL (SA710) (IF EQUIPPED)
1. FM/AM Selection Button
2. Power ON/OFF & Volume Control Button
3. AUTO STORE Button
4. Automatic Channel Selection Button
5. TUNE/AUDIO Control Button
6. Preset Button
7. CD/AUX Selection Button
A-100FD
4 104
Features of your vehicle
1. FM/AM Selection Button
4. Automatic Channel Selection
6. Preset Button
Turns to FM/AM mode and toggles FM1
Button
Push [1]~[6]button less than 0.8 second
and FM2AMFM1··· when the button is
• When the
[SEEK
]
button is
to play the channel saved in each button.
pressed each time.
pressed, it reduces the band frequency
Push preset button for 0.8 second or
by 5kHz to automatically select chan-
longer to save current channel to the
nel. Stops at the previous frequency if
respective button with a beep.
2. Power ON/OFF & Volume
no channel is found.
Control Button
• When the
[SEEK
]
button is
Turns the ON/OFF set when the IGNI-
7. CD/AUX Selection Button
pressed, it increases the band fre-
TION SWITCH is on ACC or ON.
quency by 5kHz to automatically select
If there is a CD in the CDP DECK it turns
If the button is turned to the right, it
to CD mode, and if a device is connected
channel. Stops at the previous fre-
increases the volume and left, decreases
to AUX then it toggles CDAUXCD···
quency if no channel is found.
the volume.
when the button is pressed each time.(It
will not turn to AUX if the auxiliary device
5. TUNE/AUDIO Control Button
3. AUTO STORE Button
is not connected.)
Turn this button clockwise by one notch
When the button is pressed, it automati-
to increase frequency by 0.05MHz from
cally selects and saves channels with
current frequency.
high reception rate to PRESET but-
Turn this button counterclockwise by one
tons(1~6) and plays the channel saved in
notch to decrease frequency by 0.05MHz
PRESET1.
from current frequency.
If no channel is saved after AST, it will
Turns to AUDIO CONTROL mode, and
play the previous channel.
toggles in the order of BASSMIDDLE
TREBLEFADERBALANCEAVC
ONP.BASSBASS··· when the button
is pressed each time.
4 105
Features of your vehicle
CD (SA710) (IF EQUIPPED)
1. CD Loading Slot
2. CD Eject Button
3. AUX Selection Button
4. SCAN Play Button
5. Automatic Track Selection Button
6. CD Indicator
7. REPEAT Button
8. RANDOM Play Button
A-100FD
4 106
Features of your vehicle
1. CD Loading Slot
4. SCAN Play Button
6. CD Indicator
Please face printed side upward and
Play first 10 seconds of each song in the
When car ignition switch is ACC or ON
gently push in.
DISC.
and if the CD is loaded, this indicator is
When the ignition switch is on ACC or
To cancel the mode, press the key once
lighted.
ON and power is OFF, power is automat-
again.
If the CD is ejected the light is turned off.
ically turned on if the CD is loaded.
This CDP supports both 8cm and 12cm
5. Automatic Track Selection
7. REPEAT Button
CDs. But if VCD, Data CD, MP3 CD are
Button
Repeats current song when the button is
loaded, "Disc-Err" message will appear
Push [SEEK
] button for less than
pressed for less than 0.8 second.
and CD will be ejected.
0.8 second to play from the beginning
Repeats the entire DISC when the button
of current song.
is pressed for 0.8 second or longer.
2. CD Eject Button
Push [SEEK
] button for less than
Push
button to eject the CD during
0.8 second and press again within 1
8. RANDOM Play Button
CD playback.
second to play the previous song.
Turns ON/OFF the randomization of the
This button is enabled when ignition
Push [SEEK
] button for 0.8 second
play list of files in the currently played
switch is off.
or longer to initiate reverse direction
DISC.
high speed sound search of current
To cancel the mode, press the key once
3. AUX Selection Button
song.
again.
If the auxiliary device is connected, it
Push [SEEK
] button for less than
turns to AUX MODE to play the sound
0.8 second to play the next song.
from the auxiliary player.
Push [SEEK
] button for less than
If no Disc and auxiliary device is con-
0.8 second or longer to initiate high
nected, it displays "NO Media" for 5 sec-
speed sound search of current song.
onds and returns to the previous mode.
4 107
Features of your vehicle
RADIO, SETUP, VOLUME CONTROL (PA710) (IF EQUIPPED)
■ Type A
1. FM Selection Button
2. AM Selection Button
3. CD Selection Button
4. AUX Selection Button
5. Automatic Channel Selection Button
6. Power ON/OFF & Volume Control Button
7. AUTO STORE Button
8. Screen ON/ OFF Button
■ Type B
9. Information Display Button
10. SETUP/CLOCK Button
11. TUNE/ENTER Button
12. Preset Button
4 108
Features of your vehicle
1. FM Selection Button
5. Automatic Channel Selection
7. AUTO STORE Button
Turns to FM mode and toggles FM1 and
Button
When the button is pressed, it automati-
FM2 when the button is pressed each
• When the [SEEK
]button is pressed,
cally selects and saves channels with
time.
it reduces the band frequency by
high reception rate to PRESET buttons
(1~6) and plays the channel saved in
100kHz to automatically select chan-
PRESET1.
2. AM Selection Button
nel. Stops at the previous frequency if
no channel is found.
If no channel is saved after AST, it will
Turns to AM mode, and toggles in the
play the previous channel.
order of AM1AM2AM1··· when the
• When the [SEEK
]button is pressed,
button is pressed each time.
it increases the band frequency by
100kHz to automatically select chan-
8. Screen ON/ OFF Button
nel. Stops at the previous frequency if
Turns off/on the displayed data and light
3. CD Selection Button
no channel is found.
on LCD.
If there is a CD in the CDP DECK it plays
The screen and light will be turned on by
the CD.
6. Power ON/OFF & Volume
pressing any button except DARK button
Press CD button to automatically insert
Control Button
when the screen is turned off.
CD when the disc is ejected from the
deck by pressing CD EJECT.
• Turns on/off the set when the IGNI-
TION SWITCH is on ACC or ON. If the
9. Information Display Button
button is turned to the right, it increas-
Displays the information of the channel
4. AUX Selection Button
es the volume and left, decreases the
currently played.
If the auxiliary device is connected, it
volume.
turns to AUX MODE to play the sound
• In AUX mode, the volume and tone
from the auxiliary player.
(BASS, MID, TRE) are adjusted in a
If no Disc and auxiliary device is connected,
separate way.
it displays “NO Media” for 5 seconds and
If you pull out AUX from a jack and
returns to the previous mode.
insert it again, then only volume goes
back to step 10.
4 109
Features of your vehicle
10. SETUP/CLOCK Button
12. Preset Button
Press this button to turn to the SOUND,
Push [1]~[6] buttons less than 0.8 second
clock setting, time display, SCROLL,
to play the channel saved in each button.
SDVC, temperature display and adjust-
Push preset button for
0.8 second or
ment mode.
longer to save current channel to the
If no action is taken for 5 seconds after
respective button with a beep.
pressing the button, it will return to the
play mode.(After entering SETUP mode,
move between items using the left, right
and PUSH functions of the TUNE button.)
The setup item changes from AUDIO
CLOCKTIMESCROLLSDVC
TEMPP.BASSAUDIO...
11. TUNE/ENTER Button
Turn this button clockwise by one notch
to increase frequency by 0.05MHz from
current frequency.
Turn this button counterclockwise by one
notch to decrease frequency by 0.05MHz
from current frequency.
Press this button while holding SETUP
button to activate / inactivate the item to.
Select SETUP item using left and right
function of the Tune button.
4 110
Features of your vehicle
CD (PA710) (IF EQUIPPED)
■ Type A
1. CD Loading Slot
2. CD Indicator
3. CD Eject Button
4. AUX Selection Button
5. Automatic Track Selection Button
6. INFO Button
7. TUNE/ENTER Button
8. REPEAT Button
■ Type B
9. RANDOM Play Button
10. SCAN Play Button
11. FOLDER Moving Button
4 111
Features of your vehicle
1. CD Loading Slot
5. Automatic Track Selection
7. TUNE/ENTER Button
Please face printed side upward and
Button
Turn this button clockwise to display
gently push in. When the ignition switch
Push [SEEK
] button for less than
songs after current song.
is on ACC or ON and power is off, power
0.8 second to play from the beginning
Also, turn this button counterclockwise to
is automatically turned on if the CD is
of current song.
display songs before current song.
loaded. This CDP supports both 8cm and
Push [SEEK
] button for less than
To listen to the displayed song, press the
12 cm CDs. But if VCD, Data CD, MP3
0.8 second and press again within 1
button to skip to the song and play.
CD are loaded, "Er-6" message will
second to play the previous song.
appear and CD will be ejected.
8. REPEAT Button
Push [SEEK
] button for 0.8 second
or longer to initiate reverse direction
Repeats current song when the button is
2. CD Indicator
pressed for less than 0.8 second.
high speed sound search of current
When car ignition switch is ACC or ON
song.
Repeats the entire DISC when the button
and if the CD is loaded, this indicator is
is pressed for 0.8 second or longer.
Push [SEEK
] button for less than
lighted. If the CD is ejected the light is
0.8 second to play the next song.
turned off.
9. RANDOM Play Button
Push [SEEK
] button for 0.8 second
Turns on/off the randomization of the
or longer to initiate high speed sound
3. CD Eject Button
play list of files in the currently played
search of current song.
DISC.
Push button to eject the CD during CD
playback. This button is enabled when
To cancel the mode, press the key once
6. INFO Button
ignition switch is off.
again.
Displays the information of the current CD
TRACK in the order of DISC TITLE
10. SCAN Play Button
4. AUX Selection Button
DISC ARTISTTRACK TITLETRACK
Plays first 10 seconds of each song in
If the auxiliary device is connected, it
ARTISTTOTAL TRACKPlay Screen
the DISC.
turns to AUX MODE to play the sound
DISC TITLE···.(not displayed if the infor-
To cancel the mode, press the key once
from the auxiliary player.
mation is not available on the DISC.)
again.
If no Disc and auxiliary device is connected,
(If MP3 is displayed FILE NAMETITLE
it displays "NO Media" for 5 seconds and
ARTISTALBUMFOLDERTOTAL
returns to the previous mode.
FILEFILE NAME···)
4 112
Features of your vehicle
10. FOLDER Moving Button
• Moves [FLDR
] button child folder of
the current folder and displays the first
song in the folder. Press TUNE/ENTER
button to move to the folder displayed.
It will play the first song in the folder.
• Moves [FLDR
] button parent folder
and displays the first song in the folder.
Press TUNE/ENTER button to move to
the folder displayed. It will play the first
song in the folder.
4 113
Features of your vehicle
USING USB (PA710) (IF EQUIPPED)
■ Type A
1. AUX Selection Button
2. Track moving Button
3. INFO Selection Button
4. Folder moving Button
5. TUNE/ENTER Button
■ Type B
6. RANDOM Playback Button
7. REPEAT Selection Button
8. SCAN Selection Button
4 114
Features of your vehicle
In case USB is connected to the multi-
3. INFO Button
6. RANDOM Playback Button
media jack inside the console on the right
Displays the information of the file cur-
Press the button for less than 0.8 second
hand side of the driver’s seat. When USB
rently played in the order of FILE NAME
to start or stop the random playback of
is connected, the ‘USB’ icon will be dis-
TITLEARTISTALBUMFOLDER
the songs in the current folder.
played on the top right corner of the dis-
TOTAL FILEFILE NAME… (Displays
Press the button for more than 0.8 sec-
play screen.
no information if the file has no song
ond to randomly play the entire songs in
information.)
the USB device.
1. AUX Selection Button
Press the button again to cancel the mode.
If USB is not connected, it switches to the
4. Folder moving Button
USB mode from the Radio and CD mode
• Moves [FLDR
] button child folder of
7. REPEAT Button
to play the song files stored in the USB.
the current folder and displays the first
Press the button for less than 0.8 second
If AUX is not connected, it is invalid key.
song in the folder. Press TUNE/ENTER
to repeat the song currently played.
button to move to the folder displayed.
Press the button for more than 0.8 sec-
2. Track Moving Button
It will play the first song in the folder.
ond to repeat the entire songs in the USB
Press the [SEEK
] button for less
• Moves [FLDR
] button parent folder
device.
than 0.8 second to play from the begin-
and displays the first song in the folder.
ning of the song currently played.
Press TUNE/ENTER button to move to
8. SCAN Button
Press the button for less than 0.8 sec-
the folder displayed. It will play the first
Plays 10 seconds of each song in the USB
ond and press it again within 1 second
song in the folder.
device.
to move to and play the previous track.
Press the button once again to cancel
Press the button for
0.8 second or
5. TUNE/ENTER Button
scanning.
longer to play the song in reverse
Turn this button clockwise to display the
direction in fast speed.
songs next to the currently played song.
Press the [SEEK
] button button for
Turn the button counterclockwise to dis-
less than 0.8 second to move to the
play the songs before the currently
next track.
played song.
Press the button for
0.8 second or
Press the button to skip to and play the
longer to play the song in forward
selected song.
direction in fast speed.
4 115
Features of your vehicle
(Continued)
(Continued)
CAUTION IN USING
An encrypted MP3 PLAYER is not
If you disconnect the external
USB DEVICE
recognizable.
USB device during playback in
To use an external USB device,
Depending on the condition of
USB mode, the external USB
make sure the device is not con-
the external USB device, the con-
device can be damaged or may
nected when starting up the vehi-
nected external USB device can
malfunction. Therefore, discon-
cle. Connect the device after
be unrecognizable.
nect the external USB device
when the audio is turned off or in
starting up.
When the formatted byte/sector
setting of External USB device is
another mode. (e.g, Radio or CD)
If you start the engine when the
not either 512BYTE or 2048BYTE,
Depending on the type and
USB device is connected, it may
then the device will not be recog-
capacity of the external USB
damage the USB device. (USB
nized.
device or the type of the files
flashdrives are very sensitive to
stored in the device, there is a dif-
Use only a USB device formatted
electric shock.)
ference in the time taken for
to FAT 12/16/32.
If the engine is started up or
recognition of the device.
USB devices without USB I/F
turned off while the external USB
Do not use the USB device for
authentication may not be recog-
device is connected, the external
purposes other than playing
nizable.
USB device may not work.
music files.
Make sure the USB connection
It may not play inauthentic MP3 or
Use of USB accessories such as
terminal does not come in con-
WMA files.
tact with the human body or other
rechargers or heaters using USB
I/F may lower performance or
1) It can only play MP3 files with
objects.
cause trouble.
the compression rate between
If you repeatedly connect or dis-
If you use devices such as a USB
8Kbps~320Kbps.
connect the USB device in a short
hub purchased separately, the
period of time, it may break the
2) It can only play WMA music
vehicle’s audio system may not
device.
files with the compression rate
recognize the USB device. In that
You may hear a strange noise
between 8Kbps~320Kbps.
case, connect the USB device
when connecting or disconnect-
Take precautions for static elec-
directly to the multimedia termi-
ing a USB device.
tricity when connecting or discon-
nal of the vehicle.
(Continued)
necting the external USB device.
(Continued)
(Continued)
4 116
Features of your vehicle
(Continued)
(Continued)
If the USB device is divided by
Please avoid using USB memory
logical drives, only the music files
products which can be used as
on the highest-priority drive are
key chains or cellular phone
recognized by car audio.
accessories as they could cause
Devices such as MP3 Player/
damage to the USB jack. Please
Cellular phone/Digital camera can
make certain only to use plug
be unrecognizable by standard
type connector products as
USB I/F can be unrecognizable.
shown below
Some non-standard USB devices
(METAL COVER TYPE USB) can
be unrecognizable.
Some USB flash memory readers
(such as CF, SD, microSD, etc.) or
external-HDD type devices can be
unrecognizable.
Music files protected by DRM
(DIGITAL RIGHTS MANAGE-
MENT) are not recognizable.
The data in the USB memory may
be lost while using this audio.
Always back up important data on
a personal storage device.
(Continued)
4 117
Features of your vehicle
RUNNING iPod® (PA710) (IF EQUIPPED)
■ Type A
1. iPod Selection Button
2. Track moving Button
3. INFO Selection Button
4. Category Selection Button
5. TUNE/ENTER Button
6. RANDOM Playback Button
■ Type B
7. REPEAT Selection Button
❈ iPod® is a trademark of Apple Inc.
4 118
Features of your vehicle
In case the iPod exclusive cable is con-
3. INFO Button
If you want to listen to the song displayed
nected to the multimedia jack inside the
in the song category, press the button,
Displays the information of the file cur-
consol on the right hand side of the dri-
then it will skip to the selected song and
rently played in the order of FILE NAME
ver’s seat. When the iPod is connected,
play.
TITLEARTISTALBUMFILE
the ‘iPod’ icon will be displayed on the top
NAME
right corner of the display screen.
(Displays no information if the file has no
6. RANDOM Playback Button
song information.)
Press the button for less than 0.8 second
1. iPod Selection Button
to activate or deactivate the random play-
If iPod is connected, it switches to the
back of the songs within the current cat-
4. Category Selection Button
iPod mode from the Radio and CD mode
egory.
Moves to the upper category from cur-
to play the song files stored in the iPod.
Press the button for longer than 0.8 sec-
rently played category of the iPod.
If there are no CD and AUX, it displays
ond to randomly play all songs in the
You will be able to search through the
‘NO MEDIA’.
entire album of the iPod.
lower category of the selected category.
Press the button once again to cancel the
The order of iPod’s category is SONG,
2. Track Moving Button
mode.
ALBUMS, ARTISTS, GENRES, and
Press the [SEEK
] button for less
iPod. (Refer to the iPod user’s manual for
than 0.8 second to play from the begin-
more information)
7. REPEAT Button
ning of the song currently played.
Repeats the song currently played.
Press the button for less than 0.8 sec-
5. TUNE/ENTER Button
ond and press it again within 1 second
When you turn the button clockwise, it
to move to and play the previous track.
will display the songs (category) next to
Press the button for
0.8 second or
the song currently played (category in
longer to play the song in reverse
the same level).
direction in fast speed.
Also, when you turn the button counter-
Press the [SEEK
] button for less
clockwise, it will display the songs (cate-
than 0.8 second to move to the next
gory) before the song currently played
track.
(category in the same level).
Press the button for
0.8 second or
longer to play the song in forward
direction in fast speed.
4 119

 

 

 

 

 

 

 

Content   ..  9  10  11  12   ..