|
|
657 Continued Info rm ation Emissions Testing Testing of Readiness Codes Your vehicle has readiness code as part of the onboard self diagnostic system. To check if they are set, turn the ignition switch to ON ( w *1 , without starting the engine. The malfunction indicator lamp will come on for several seconds. If it then If you are required to have your vehicle tested before the readiness codes are ready, 1. Fill the gas tank to approximately 3/4 full. seconds. 5. Keep the vehicle in ( P (continuously variable transmission) or ( N (manual transmission). Increase the engine speed to 2,000 rpm, and hold it there for about 6. Let the engine idle with your foot off the accelerator for 20 seconds. *1: Models with the smart entry system have an ENGINE START/STOP button instead of an 1 The readiness codes are erased when the battery is If a testing facility determines that the readiness If the testing facility determines the readiness codes |