Great Wall Florid. Manual - part 14

GWFLORID Maintenance Manual

54

13. Remove the No. 2 gear shift fork shaft, No. 2 gear shift 

fork, and No. 2 guide block.

14. Remove the input and output shaft subassembly.

15. Remove the differential subassembly.

16.  Remove the magnetic body from the inside of the 

clutch housing.

55

Transmission

17.  Remove the oil drain slot from the inside of the transmis-

sion case.

18.  Remove the T oil seal with a screwdriver from the 

clutch housing.

19.  Remove the release fork and the release bearing from 

the clutch housing.

20.  Remove the set bolts of the release fork from the 

clutch housing.

GWFLORID Maintenance Manual

56

Disassembling the Input Shaft Subassembly

Components

Input shaft

Rear ball bearing

No. 3 gear sleeve/

No. 3 gear hub

No. 3 Slider

Spring expansion

 ring

5th gear 

synchronizer ring

5th gear gear 

subassembly

Needle bearing

Retaining ring

Shaft retainer

Steel ball

5th gear thrust washer

Needle bearing

4th gear subassembly

4th gear synchronizer ring

Retaining ring

Shaft retainer

No. 2 gear sleeve/No. 2 

gear hub

No. 2 Slider

Spring expansion ring

3rd gear 

synchronizer ring

Needle bearing

Front ball bearing

3rd gear gear subassembly

Spring expansion ring

Spring  expansion 

ring

1.  Remove the input shaft's ball bearing.

57

Transmission

2.  Remove each component from the 3rd synchronizer.

3.  Remove the 5th gear needle bearing.

4.  Remove the retaining ring.

5.  Remove the shaft retainer.