Ford F150 Pickup. Instruction - part 112

1. Remove the pin-type retainer.  

2. Remove the screws.  

3. Carefully pull the wheel opening moulding to release the nine clips and remove the front wheel 

opening moulding. 

Fig. 2: Removing Screws of Wheel Opening Moulding 
Courtesy of FORD MOTOR CO. 

3. Remove the inner fender splash shield. 

1. Remove the screws.  

2. Pull the inner fender splash shield to release the clips. 

 

2003 Ford Pickup F150 

2003 ACCESSORIES AND BODY, CAB Antenna - F150 Pickup

  

Fig. 3: Removing Screws Of Inner Fender Splash Shield 
Courtesy of FORD MOTOR CO. 

4. Disconnect the radio antenna lead-in cable (18812) from the antenna base.  

5. Remove the audio unit. refer to AUDIO UNIT .  

6. Push the radio antenna lead-in cable into the passenger compartment. 

1. Disconnect the antenna clip from the sheet metal.  

2. Push the grommet into the passenger compartment.  

3. Push the radio antenna lead-in cable into the passenger compartment. 

 

2003 Ford Pickup F150 

2003 ACCESSORIES AND BODY, CAB Antenna - F150 Pickup

  

 

2003 Ford Pickup F150 

2003 ACCESSORIES AND BODY, CAB Antenna - F150 Pickup

  

Fig. 4: Pushing Radio Antenna Lead-In Cable Into Passenger Compartment 
Courtesy of FORD MOTOR CO. 

7. Remove the antenna lead-in cable. 

1. Disconnect the three cable locators from the lower instrument panel channel.  

2. Remove the antenna lead-in cable from under the instrument panel (04320). 

Fig. 5: Removing Antenna Lead-In Cable 
Courtesy of FORD MOTOR CO. 

8. To install, reverse the removal procedure. 

 

2003 Ford Pickup F150 

2003 ACCESSORIES AND BODY, CAB Antenna - F150 Pickup