|
|
ANTENNA CABLE - SATELLITE RADIO DESCRIPTION The satellite radio antenna cable connects the roof mounted antenna to the satellite receiver module. It has two REMOVAL 1. Disconnect and isolate the battery negative cable. 2. Remove the rear quarter trim panel. (Refer to 23 - BODY/INTERIOR/QUARTER PANEL TRIM - REMOVAL) 3. Lower the rear portion of the headliner as neces- sary to access the underside of the satellite 4. Detach the antenna cable (1) from the body har- ness. Disconnect wire harness connectors at each INSTALLATION 1. Secure the antenna cable (1) to the body harness. Connect the wire harness connectors at each end 2. Install the headliner (Refer to 23 - BODY/INTERI- OR/HEADLINER - INSTALLATION). 3. Install the rear quarter trim panel. (Refer to 23 - BODY/INTERIOR/QUARTER PANEL TRIM - INSTALLATION) 4. Connect the battery negative cable. PM AUDIO 8A - 133 |