Dodge Nitro. Manual - part 382

Fig. 16: Trim Stick C-4755 
Courtesy of CHRYSLER LLC 

Fig. 17: Torx Bit Set C-4794-B 
Courtesy of CHRYSLER LLC 

 

2007 Dodge Nitro R/T 

2007 ACCESSORIES AND EQUIPMENT Body - Nitro

  

Fig. 18: Moldings Remover C-4829-A 
Courtesy of CHRYSLER LLC 

Fig. 19: Outer Belt Molding Remover - 9093 
Courtesy of CHRYSLER LLC 

 

2007 Dodge Nitro R/T 

2007 ACCESSORIES AND EQUIPMENT Body - Nitro

  

Fig. 20: Strain Gauge Holder 9689-A 
Courtesy of CHRYSLER LLC 

DOOR - FRONT 

CARRIER PLATE 

REMOVAL 

CARRIER PLATE - FRONT DOOR 

CAUTION: Do not attempt to remove the trim panel the conventional way. This door 

panel has hooks holding it to the door rather than push pins. The door 
module must be removed as an assembly. Carefully follow these 
instructions in order to prevent unnecessary damage to the trim panel.

 

2007 Dodge Nitro R/T 

2007 ACCESSORIES AND EQUIPMENT Body - Nitro

  

Fig. 21: Using Battery Terminal Removal Tool To Disconnect Negative Battery Cable From Battery 
Courtesy of CHRYSLER LLC 

1. Loosen the battery terminal nut and use a battery terminal removal tool (2) to disconnect the negative 

battery cable from the battery (1).  

2. Remove the trim panel from the door. See REMOVAL. 

Fig. 22: Door Plug & Rear Exterior Handle Nut 
Courtesy of CHRYSLER LLC 

3. Remove the door plug (2).  

 

2007 Dodge Nitro R/T 

2007 ACCESSORIES AND EQUIPMENT Body - Nitro