|
|
Content .. 1015 1016 1017 1018 ..
© 200424 3-3 Removal and installation SINGLE REAR AXLE 1132 ΧΦ65/75/85 series 8 2 Installing axle shafts Clean the mating surfaces of the axle shaft flange and wheel hub unit. 2. Apply sealant to the mating surface of the axle shaft flange. See "Technical data". 3. Fit the axle shaft. Tighten the axle shaft attachment bolts to the specified tightening torque, see "Technical data". 4. Activate the differential lock and remove the special tool from the differential lock. Install the switch. |