Chrysler Concorde (2004 year). Manual - part 3

 

  Index      Chrysler     Chrysler Concorde (2004 year) - manual in english

 

Search            copyright infringement  

 

 

 

 

 

 

 

 

 

Content      ..     1      2      3      4      ..

 

 

Chrysler Concorde (2004 year). Manual - part 3

 

 

Airbag Light

You will want to have the airbags ready for your
protection in an impact. While the airbag system
is designed to be maintenance free, if any of the

following occurs, have an authorized dealer service the
system immediately.

• The AIRBAG light does not come on or flickers during

the 6 to 8 seconds when the ignition switch is first
turned on.

• The light remains on or flickers after the 6 to 8 second

interval.

• The light flickers or comes on and remains on while

driving.

Child Restraint

Everyone in your vehicle needs to be buckled up all the
time– babies and children too. Every state in the United
States and all Canadian provinces require that small
children ride in proper restraint systems. This is the law,
and you can be prosecuted for ignoring it.

Children 12 years and under should ride properly buck-
led up in a rear seat. According to crash statistics,
children are safer when properly restrained in the rear
seat rather than the front.

WARNING!

In a collision, an unrestrained child, even a tiny
baby, can become a missile inside the vehicle. The
force required to hold even an infant on your lap
could become so great that you could not hold the
child, no matter how strong you are. The child and
others could be badly injured. Any child riding in
your vehicle should be in a proper restraint for the
child’s size.

There are different sizes and types of restraints for
children from newborn size to the child almost large
enough for an adult safety belt. Always check the child
seat owner’s manual to ensure you have the right seat for
your child. Use the restraint that is correct for your child:

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

41

2

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Infants and Child Restraints

• Safety experts recommend that children ride

rearward-facing in the vehicle until they are at least
one year old and weigh at least 20 lbs (9 kg). Two types
of child restraints can be used rearward-facing: infant
carriers and “convertible” child seats.

• The infant carrier is only used rearward-facing in the

vehicle. It is recommended for children who weigh up
to about 20 lbs (9 kg). “Convertible” child seats can be
used either rearward-facing or forward-facing in the
vehicle. Convertible child seats often have a higher
weight limit in the rearward-facing direction than
infant carriers do, so they can be used rearward-facing
by children who weigh more than 20 lbs (9 kg) but are
less than one year old. Both types of child restraints are
held in the vehicle by the lap/shoulder belt or the
LATCH anchorage system. (See the LATCH — Child
Seat Anchorage System section for greater explana-
tion.)

• Rearward-facing child seats must NEVER be used in

the front seat of a vehicle with a front passenger
airbag. An airbag deployment could cause severe
injury or death to infants in this position.

WARNING!

• A rearward facing infant restraint should only be

used in a rear seat. A rearward facing infant
restraint in the front seat may be struck by a
deploying passenger airbag which may cause se-
vere or fatal injury to the infant.

• Improper installation can lead to failure of an

infant or child restraint. It could come loose in a
collision. The child could be badly injured or
killed. Follow the manufacturer’s directions ex-
actly when installing an infant or child restraint.

42

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Here are some tips on getting the most out of your child
restraint:

• Before buying any restraint system, make sure that it

has a label certifying that it meets all applicable Safety
Standards. We also recommend that you try a child
restraint in the vehicle seats where you will use it
before you buy it.

• The restraint must be appropriate for your child’s

weight and height. Check the label on the restraint for
weight and height limits.

• Carefully follow the instructions that come with the

restraint. If you install the restraint improperly, it may
not work when you need it.

• Buckle the child into the seat according to the seat

manufacturer’s directions.

• When your child restraint is not in use, secure it in the

vehicle with the seat belt or remove it from the vehicle.
Do not leave it loose in the vehicle. In a sudden stop or
collision, it could strike the occupants or seat backs
and cause serious personal injury.

NOTE:

For

additional

information,

refer

to

www.seatcheck.org or call 1–866–SEATCHECK.

Older Children and Child Restraints
Children who weigh more than 20 lbs (9 kg) and who are
older than one year can ride forward-facing in the
vehicle. Forward-facing child seats and convertible child
seats used in the forward-facing direction are for children
who weigh 20 to 40 lbs (9 to 18 kg) and who are older
than one year. These child seats are also held in the
vehicle by the lap/shoulder belt or the LATCH anchor-
age system. (See the LATCH — Child Seat Anchorage
System Section.)

The belt-positioning booster seat is for children weighing
more than 40 lbs (18 kg), but who are still too small to fit
the vehicle’s seat belts properly. If the child cannot sit
with knees bent over the vehicle’s seat cushion while the
child’s back is against the seat back, they should use a
belt-positioning booster seat. The child and belt-
positioning booster seat are held in the vehicle by the
lap/shoulder belt.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

43

2

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Children Too Large For Booster Seats
Children who are large enough to wear the shoulder belt
comfortably, and whose legs are long enough to bend
over the front of the seat when their back is against the
seatback, should use the lap/shoulder belt in the rear
seat.

• Make sure that the child is upright in the seat.
• The lap portion should be low on the hips and as snug

as possible.

• Check belt fit periodically. A child’s squirming or

slouching can move the belt out of position.

• If the shoulder belt contacts the face or neck, move the

child closer to the center of the vehicle. Never allow a
child to put the shoulder belt behind their back or
under their arm.

LATCH – Child Seat Anchorage System (Lower
Anchors and Tether for CH ildren)
Your vehicle’s rear seat is equipped with the child
restraint anchorage system called LATCH. The LATCH
system provides for the installation of the child restraints
without using the vehicle’s seat belts, instead securing
the child restraint using lower anchorages and upper
tether straps from the child restraint to the vehicle
structure.

LATCH-compatible child restraint systems are now avail-
able. However, because the lower anchorages are to be
introduced over a period of years, child restraint systems
having attachments for those achorages will continue to
also have features for installation using the vehicle’s seat
belts. Child restraints having tether straps and hooks for
connection tot he top tether anchorages have been avail-
able for some time. For some older child restraints, many
child restraint manufacturers offer add-on tether strap
kits or retro-fit kits. You are urged to take advantage of all
the available attachments provided with your child re-
straint in any vehicle.

44

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

-------------------------------------------------------------------------------------------------------------------------------------------------------------

All three rear seating positions have lower
anchorages that are capable of accomodating
LATCH-compatible child seats. These are
round bars, located at the lower area of the seat

back. Install your child seat as per child seat manufac-
turer recommendations.

Installing the LATCH-Compatible Child Restraint
System
We urge that you carefully follow the directions of the
manufacturer when installing your child restraint. Not all
child restraint systems will be installed as described here.

Again, carefully follow the installation instructions that
were provided with the child restraint system.

The rear seat lower anchorages are round bars, located at
the rear of the seat cushion where it meets the seat back,
and are just visible when you lean into the rear seat to
install the child restraint. You will easily feel them if you
run your finger alon the intersection of the seatback and
seat cushion surfaces.

In addition, there are tether strap anchorages
behind each rear seating position located in the
panel between the rear seat back and the rear
window. These tether strap anchorages are

under a hinged plastic cover with this symbol on it.

Many, but not all restraint systems will be equipped with
separate straps on each side, with each having a hook or
connector for attachment to the lower anchorage and a
means of adjusting the tension in the strap. Forward-
facing toddler restraints and some rear-facing infant
restraints will also be equipped with a tether strap, a
hook for attachment to the tether strap anchorage and a
means of adjusting the tension of the strap.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

45

2

-------------------------------------------------------------------------------------------------------------------------------------------------------------

You will first loosen the adjusters on the lower straps and
on the tether strap so that you can more easily attach the
hooks or connectors over the top of the anchorage bars,
pushing aside the seat cover material. Then lift the tether
anchorage cover directly behind the seat where you are
placing the child restraint and attach the tether strap to
the anchorage, being careful to route the tether strap to
provide the most direct path between the anchor and the
child restraint. If your vehicle is equipped with adjust-
able rear head restraints, raise the head restraint and,
where possible, route the tether strap under the head
restraint and between the two posts. If not possible,
lower the head restraint and route the tether strap around
the outboard side of the head restraint. Finally, tighten all
three straps as you push the child restraint rearward and
downward into the seat, removing slack in the straps
according to the child restraint manufacturer’s instruc-
tions.

WARNING!

Improper installation of a child restraint to the
LATCH anchorages can lead to failure of an infant or
child restraint. The child could be badly injured or
killed. Follow the manufacturer’s directions exactly
when installing an infant or child restraint.

Installing Child Restraints Using the Vehicle Seat
Belts
The passenger seat belts are equipped with cinching latch
plates which are designed to keep the lap portion of the
lap/shoulder belt tight around the child restraint so that
it is not necessary to use a locking clip. Pull up on the
shoulder portion of the lap/shoulder belt to tighten the
belt. The cinching latch plate will keep the belt tight,
however, any seat belt system will loosen with time, so
check the belt occasionally and pull it tight if necessary.

In the rear seat, you may have trouble tightening the
lap/shoulder belt on the child restraint because the
buckle or latch plate is too close to the belt path opening
on the restraint. Disconnect the latch plate from the

46

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

-------------------------------------------------------------------------------------------------------------------------------------------------------------

buckle and twist the short buckle-end belt several times
to shorten it. Insert the latch plate into the buckle with the
release button facing out.

If the belt still can’t be tightened, or if by pulling and
pushing on the restraint loosens the belt, you may need
to do something more. Disconnect the latch plate from
the buckle, turn the buckle around, and insert the latch
plate into the buckle again. If you still can’t make the
child restraint secure, try a different seating position.

To attach a child restraint tether strap:

1. Lift the cover over the anchor directly behind the seat
where you are placing the child restraint.

2. Route the tether strap to provide the most direct path
for the strap between the anchor and the child seat. If
your vehicle is equipped with adjustable rear head
restraints, raise the head restraint and route the tether
strap under the head restraint and between the two posts.
If not possible, lower the head restraint and pass the
tether strap around the outboard side of the head re-
straint.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

47

2

-------------------------------------------------------------------------------------------------------------------------------------------------------------

3. Attach the tether strap hook (A) of the child restraint to
the anchor (B) and remove slack in the tether strap
according to the child restraint manufacturer’s instruc-
tions.

WARNING!

An incorrectly anchored tether strap could lead to
increased head motion and possible injury to the
child. Use only the anchor positions directly behind
the child seat to secure a child restraint top tether
strap.

Transporting Pets
Airbags deploying in the front seat could harm your pet.
An unrestrained pet will be thrown about and possibly
injured, or injure a passenger during panic braking or in
a collision.

Pets should be restrained in the rear seat in pet harnesses
or pet carriers that are secured by seat belts.

ENGINE BREAK-IN RECOMMENDATIONS

The engine in your new vehicle does not require a long
break-in period.

Drive moderately during the first 300 miles (500 km).
After the initial 60 miles (100 km), speeds up to 50 or 55
mph (80 or 90 km/h) are desirable.

While cruising, brief full-throttle acceleration, within the
limits of local traffic laws, contributes to a good break-in.

Wide open throttle acceleration in low gear can be
detrimental and should be avoided.

The crankcase oil installed in the engine at the factory is
a high quality energy conserving type lubricant. Oil
changes should be consistent with expected climate con-
ditions under which vehicle operations will occur. The
recommended viscosity and quality grades are in Section
7 of this manual.

Do not use non-detergent or straight mineral oils.

A new engine may consume some oil during its first few
thousand miles of operation. This is a normal part of the
break-in and not an indication of a problem.

48

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

-------------------------------------------------------------------------------------------------------------------------------------------------------------

SAFETY TIPS

Exhaust Gas

WARNING!

Exhaust gases can injure or kill. They contain carbon
monoxide (CO) which is colorless and odorless.
Breathing it can make you unconscious and can
eventually poison you. To avoid breathing (CO)
follow the safety tips below.

• Do not run the engine in a closed garage or in confined

areas any longer than needed to move your vehicle in
or out of the area.

• If it is necessary to sit in a parked vehicle with the

engine running, adjust your heating or cooling con-
trols to force outside air into the vehicle. Set the blower
at high speed.

• To avoid drawing exhaust gases into the vehicle, close

the trunk while driving. However, if for some reason it

must remain open, close all windows. Adjust the
heating or cooling system to force outside air into the
vehicle. Set the blower at high speed.

Safety Checks You Should Make Inside the
Vehicle

Seat Belts
Inspect the belt system periodically, checking for cuts,
frays and loose parts. Damaged parts must be replaced
immediately. Do not disassemble or modify the system.

Safety belt assemblies must be replaced after an accident
if they have been damaged (bent retractor, torn webbing,
etc.). If there is any question regarding belt or retractor
condition, replace the belt.

Airbag Light

The light should come on and remain on for 6 to
8 seconds as a bulb check when the ignition
switch is first turned ON. If the bulb is not lit

during starting, have it replaced. If the light stays on or
comes on while driving, have the system checked by an
authorized dealer.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

49

2

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Defrosters
Check operation by selecting the defrost mode and place
the blower control on high speed. You should be able to
feel the air directed against the windshield.

Periodic Safety Checks You Should Make Outside
the Vehicle

Tires
Examine tires for excessive tread wear or uneven wear
patterns. Check for stones, nails, glass, or other objects
lodged in the tread. Inspect for tread cuts or sidewall
cracks. Check wheel nuts for tightness and tires (includ-
ing spare) for proper pressure.

Lights
Have someone observe the operation of exterior lights
while you work the controls. Check turn signal and high
beam indicator lights on the instrument panel.

Fluid Leaks
Check area under vehicle after overnight parking for
brake fluid, fuel, water, oil, or other fluid leaks. Also, if
gasoline fumes are present, the cause should be corrected
immediately.

50

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

-------------------------------------------------------------------------------------------------------------------------------------------------------------

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

CONTENTS

䡵 Cup Holders . . . . . . . . . . . . . . . . . . . . . . . . . .55

▫ Front Seat Cupholders

(Concorde Limited Vehicles Only) . . . . . . . . . . .55

▫ Rear Seat Cupholders . . . . . . . . . . . . . . . . . . .55

䡵 Coat Hook . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
䡵 Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

▫ Adjusting The Inside Day/Night Mirror . . . . . .56
▫ Automatic Dimming Mirror Feature . . . . . . . . .56
▫ Heated Remote Control Mirrors — If

Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

▫ Electric Remote Control Mirrors . . . . . . . . . . . .57
▫ Mirror Adjustment . . . . . . . . . . . . . . . . . . . . .57

䡵 Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59

▫ Power Seats . . . . . . . . . . . . . . . . . . . . . . . . . .59
▫ Power Reclining Seats . . . . . . . . . . . . . . . . . . .59
▫ Driver’s Seat Glide –To – Exit Feature . . . . . . . .60
▫ Lumbar Support . . . . . . . . . . . . . . . . . . . . . . .61
▫ Heated Seats— If Equipped . . . . . . . . . . . . . . .61
▫ Memory Feature . . . . . . . . . . . . . . . . . . . . . . .61
▫ Programming The Remote Keyless Transmitter

For The Memory Feature . . . . . . . . . . . . . . . . .62

▫ Head Restraints . . . . . . . . . . . . . . . . . . . . . . .63

䡵 To Open And Close The Hood . . . . . . . . . . . . .64
䡵 Interior Lights . . . . . . . . . . . . . . . . . . . . . . . . .65

3

-------------------------------------------------------------------------------------------------------------------------------------------------------------

▫ To Turn The Interior Lights On . . . . . . . . . . . . .65
▫ Battery Saver Feature—Interior Lights . . . . . . . .65
▫ Instrument Panel Lighting . . . . . . . . . . . . . . . .65
▫ Front Map/Reading Lights . . . . . . . . . . . . . . .66
▫ Rear Seat Reading/Courtesy Lights . . . . . . . . .66

䡵 Exterior Lights . . . . . . . . . . . . . . . . . . . . . . . . .66

▫ Headlights And Parking Lights . . . . . . . . . . . .66
▫ Lights-On Reminder . . . . . . . . . . . . . . . . . . . .67
▫ Automatic Headlights . . . . . . . . . . . . . . . . . . .67
▫ Headlight Time Delay . . . . . . . . . . . . . . . . . . .67
▫ Battery Saver Feature . . . . . . . . . . . . . . . . . . .68
▫ Fog Lights . . . . . . . . . . . . . . . . . . . . . . . . . . .68
▫ Daytime Running Lights (Canada Only) . . . . . .68

䡵 Multifunction Control Lever . . . . . . . . . . . . . . .68

▫ Turn Signals . . . . . . . . . . . . . . . . . . . . . . . . . .68
▫ Headlight Dimmer Switch . . . . . . . . . . . . . . . .69

▫ Passing Light . . . . . . . . . . . . . . . . . . . . . . . . .69
▫ Windshield Wipers And Washers . . . . . . . . . . .69
▫ Speed Sensitive Intermittent Wipers System . . . .70

䡵 Tilt Steering Column . . . . . . . . . . . . . . . . . . . . .71
䡵 Traction Control Switch — If Equipped . . . . . . .72
䡵 Electronic Speed Control . . . . . . . . . . . . . . . . . .72

▫ To Activate . . . . . . . . . . . . . . . . . . . . . . . . . . .73
▫ To Set At A Desired Speed . . . . . . . . . . . . . . . .73
▫ To Deactivate . . . . . . . . . . . . . . . . . . . . . . . . .73
▫ To Resume Speed . . . . . . . . . . . . . . . . . . . . . .74
▫ To Vary The Speed Setting . . . . . . . . . . . . . . . .74
▫ To Accelerate For Passing . . . . . . . . . . . . . . . .74
▫ Using Speed Control On Hills . . . . . . . . . . . . .74

䡵 Overhead Console . . . . . . . . . . . . . . . . . . . . . .75

▫ Dome/Reading Lights . . . . . . . . . . . . . . . . . . .75

䡵 Garage Door Opener — If Equipped . . . . . . . . .76

52

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

-------------------------------------------------------------------------------------------------------------------------------------------------------------

▫ Programming The Universal Transceiver . . . . . .77
▫ “Rolling Code” Programming . . . . . . . . . . . . .78
▫ Canadian Programming/Gate Programming . . .80
▫ Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . .80
▫ Reprogramming A Single Button . . . . . . . . . . .80
▫ Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80

䡵 Garage Door Opener — If Equipped . . . . . . . . .81

▫ Programming The Universal Transceiver . . . . . .82
▫ “Rolling Code” Programming . . . . . . . . . . . . .84
▫ Canadian Programming/Gate Programming . . .85
▫ Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . .86
▫ Reprogramming a Single Universal Transceiver

Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86

▫ Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86

䡵 Power Sun Roof — If Equipped . . . . . . . . . . . .87

▫ Wind Buffeting . . . . . . . . . . . . . . . . . . . . . . . .88

▫ Sun Roof Maintenance . . . . . . . . . . . . . . . . . . .88

䡵 Electronic Vehicle Information Center

(EVIC) — If Equipped . . . . . . . . . . . . . . . . . . .88

▫ Customer Programmable Features . . . . . . . . . .89
▫ Compass/Temperature/Trip Computer . . . . . . .93
▫ Trip Computer . . . . . . . . . . . . . . . . . . . . . . . .93

䡵 Overhead Travel Information Center — If

Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96

▫ US/M Button . . . . . . . . . . . . . . . . . . . . . . . . .97
▫ Reset Button . . . . . . . . . . . . . . . . . . . . . . . . . .97
▫ Global Reset . . . . . . . . . . . . . . . . . . . . . . . . . .97
▫ Step Button . . . . . . . . . . . . . . . . . . . . . . . . . .97
▫ Average Fuel Economy (AVG ECO) . . . . . . . . .97
▫ Distance To Empty (DTE) . . . . . . . . . . . . . . . .97
▫ Trip Odometer (ODO) . . . . . . . . . . . . . . . . . . .98
▫ Elapsed Time (ET) . . . . . . . . . . . . . . . . . . . . . .98

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

53

3

-------------------------------------------------------------------------------------------------------------------------------------------------------------

▫ C/T Button . . . . . . . . . . . . . . . . . . . . . . . . . .98
▫ Compass/Temperature Display . . . . . . . . . . . .98
▫ Automatic Compass Calibration . . . . . . . . . . . .98

▫ Manual Compass Calibration . . . . . . . . . . . . . .98
▫ Outside Temperature . . . . . . . . . . . . . . . . . . . 100

䡵 Electrcal Power Outlet . . . . . . . . . . . . . . . . . . 100

54

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

-------------------------------------------------------------------------------------------------------------------------------------------------------------

CUP HOLDERS

Front Seat Cupholders (Concorde Limited
Vehicles Only)

The cupholders are located in the forward edge of the
console. Press the forward edge of the console to release
the cupholders. Press the cupholder back into the console
when they are no longer needed.

Rear Seat Cupholders

The rear cupholders are located in the rear seat folding
arm rest. Lower the arm rest and the cupholders are
exposed.

COAT HOOK

The coat hook is located next to the Rear Seat Reading/
Courtesy Light Switch. Pull the hook down for access.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

55

3

-------------------------------------------------------------------------------------------------------------------------------------------------------------

MIRRORS

Adjusting The Inside Day/Night Mirror

Adjust the mirror to center on the view through the rear
window. A two point pivot system allows for horizontal
and vertical mirror adjustment.

Automatic Dimming Mirror Feature

This mirror will automatically adjust for annoying head-
light glare from vehicles behind you. Push in the button
on the base of the mirror to activate the dimming feature.
A green light in the button will illuminate when this
feature is on.

NOTE:

This feature is most effective when left in the

ON position.

Heated Remote Control Mirrors — If Equipped

These mirrors are heated to melt frost or ice. This
feature is activated whenever you turn on the rear

window defrost.

NOTE:

On vehicles equipped with the automatic dim-

ming mirror feature, and when the dimming feature is
activated, the heated remote control mirrors will be
automatically dimmed as well.

56

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

-------------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

 

 

 

 

 

Content      ..     1      2      3      4      ..