|
|
3. (D55) CAN B BUS (+) CIRCUIT OPEN Turn the ignition off. Disconnect the negative battery cable. Disconnect the Passenger Door Module C4 connector. Disconnect the Front Control Module C1 connector. Measure the resistance of the (D55) CAN B Bus (+) circuit between the Is the resistance below 2.0 ohms? Yes >> Go To 4 No >> Repair the (D55) CAN B Bus (+) circuit for an open. Perform BODY VERIFICATION TEST – VER 1. (Refer to 4. (D54) CAN B BUS (–) CIRCUIT OPEN Measure the resistance of the (D54) CAN B Bus (–) circuit between the Is the resistance below 2.0 ohms? Yes >> Replace the Passenger Door Module in accordance with the service information. Perform BODY VERIFICATION TEST – VER 1. (Refer to No >> Repair the (D54) CAN B Bus (–) circuit for an open. Perform BODY VERIFICATION TEST – VER 1. (Refer to 8N - 110 POWER MIRRORS - ELECTRICAL DIAGNOSTICS LX |