|
|
5. If vehicle is equipped with AWD, make sure spac- ers (1) on top of crossmember mount bushings (2) 6. Carefully raise jack, guiding coil spring and upper end of shock absorber (4) into mounted positions. 7. Install shock absorber upper mounting screws (2). Tighten upper mounting screws to 52 N·m (38 ft. NOTE: Rear crossmember mounting bolts (2) are 8. Install crossmember mounting bolts (2 and 3). Snug, but do not fully tighten bolts at this time. 2 - 126 REAR LX |