|
|
Tighten: Tighten the bolt to 50 N.m (37 lb ft). 4. Install the drive belt. Refer to Drive Belt Replacement. INTAKE MANIFOLD COVER REPLACEMENT Removal Procedure
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Mechanical - 6.6L - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 13: View Of Intake Manifold Cover 1. Loosen the intake manifold cover clamp (1) at the resonator. 2. Loosen the intake manifold cover bolt (2). 3. Remove the intake manifold cover. Installation Procedure
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Mechanical - 6.6L - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 14: View Of Intake Manifold Cover 1. Install the intake manifold cover. 2. Tighten the intake manifold cover bolt (2) until snug. NOTE: Refer to Fastener Notice .
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Mechanical - 6.6L - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
3. Tighten the intake manifold cover clamp (1) at the resonator. Tighten: Tighten the clamp to 6 N.m (53 lb in). ENGINE MOUNT INSPECTION Fig. 15: Identifying Oil Pan Skid Plate
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Mechanical - 6.6L - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
|
|
|