|
|
Content .. 2557 2558 2559 2560 ..
performs a supporting function over a long period of time, there is not movement between 27. Replace any gears showing brinelling. Fig. 149: Inspect Mainshaft Bearing Surfaces 28. Inspect the mainshaft bearing surfaces for the following conditions: Wear Lack of lubricant Debris embedded in the oil grooves 29. Inspect the main shaft splines for wear or damage. 30. Replace the main shaft if any of the above conditions are found.
2008 Chevrolet Silverado 1500 2008 TRANSMISSION Manual Transmission - Tremec 5-Speed (M96) - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
BEARINGS AND SPACERS CLEANING AND INSPECTION Fig. 150: Bearings 1. Clean all bearing components in a suitable solvent and air dry. 2. Inspect the bearings and journals for roughness and unusual wear or damage. NOTE: Do not allow the bearings to spin. Turn them slowly by hand.
2008 Chevrolet Silverado 1500 2008 TRANSMISSION Manual Transmission - Tremec 5-Speed (M96) - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
3. Inspect the main shaft bearing journals for wear. 4. Inspect the main shaft speed gear bearings for wear. 5. Inspect the main drive gear pilot bearing rollers for wear. 6. Replace components which show signs of excessive wear. 7. Do not file surfaces which have been hardened and precision ground. 8. Replace worn or damaged bearings. 9. Replace mated bearing components when only one part is damaged. CLUTCH HOUSING ASSEMBLE Fig. 151: Clutch Housing Screws 1. Install the 4 clutch housing screws.
2008 Chevrolet Silverado 1500 2008 TRANSMISSION Manual Transmission - Tremec 5-Speed (M96) - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 152: Interior Clutch Housing Nuts 2. Install the 2 interior housing nuts. COUNTER GEAR SHAFT ASSEMBLE
2008 Chevrolet Silverado 1500 2008 TRANSMISSION Manual Transmission - Tremec 5-Speed (M96) - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Content .. 2557 2558 2559 2560 ..
|
|
|