|
|
Content .. 2452 2453 2454 2455 ..
PRESSURE RELIEF VALVE REPLACEMENT Removal Procedure 1 Tip: 1. Remove the front and rear seat belt guide covers. 2. Ensure webbing is routed through guide loop. 3. Route belt webbing through garnish molding. 4. Drop garnish molding over guide loop and then secure. 2 Rear Window Lower Garnish Molding Retainer Clip (Qty: 6)
2008 Chevrolet Silverado 1500 2008 ACCESSORIES & EQUIPMENT Interior Trim and Paneling - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 32: Pressure Relief Valve Use a flat-bladed tool to pry the pressure release valve from the cab back panel. Remove the pressure relief valve from the vehicle.
2008 Chevrolet Silverado 1500 2008 ACCESSORIES & EQUIPMENT Interior Trim and Paneling - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Installation Procedure Fig. 33: Pressure Relief Valve Align the pressure relief valve into the opening of the rear cab.
2008 Chevrolet Silverado 1500 2008 ACCESSORIES & EQUIPMENT Interior Trim and Paneling - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
|
|
|