|
|
Content .. 1775 1776 1777 1778 ..
3. Remove the intake air heater. Refer to Intake Air Heater Replacement . 4. Remove the generator. Refer to Generator Replacement (4.3L) or Generator Replacement (4.8L, 5.3L, 6.0L, and 6.2L) or Generator Replacement (6.6L). 5. Remove the drive belt tensioner. Refer to Drive Belt Tensioner Replacement . 6. Remove the engine wiring harness clip from the oil level indicator tube bracket (2). 7. Remove the oil level indicator tube bolt (3). 8. Remove the oil level indicator tube bracket bolts (1). 9. Remove the oil level indicator tube bracket (2). Fig. 280: View Of Fuel Filter Adapter Stud, Generator Bracket Stud & Inlet Hose
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Electrical - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Bracket Nuts 10. Remove the heater inlet hose bracket nut (4) from the fuel filter adapter stud (1). 11. Remove the heater inlet hose bracket nut (3) from the generator bracket stud (2). 12. Reposition the heater inlet hose/pipe out of the way.
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Electrical - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 281: View Of Fuel Feed Pipe Bracket Bolts 13. Remove the fuel feed pipe bracket bolts (1). Fig. 282: View Of Engine Wiring Harness Clip Bolt 14. Remove the engine wiring harness clip bolt (1). 15. Reposition the engine wiring harness out of the way.
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Electrical - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 283: View Of Generator Bracket Bolts & Idler Pulley Bolts 16. Remove the generator bracket bolts (1) and bracket. 17. Loosen the idler pulley bolts (2) and remove the pulleys from the generator bracket, if necessary. Installation Procedure
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Electrical - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Content .. 1775 1776 1777 1778 ..
|
|
|