|
|
Content .. 1372 1373 1374 1375 ..
Fig. 191: Installing J 45858-3, Thrust Bearing & Washer, & Forcing Screw (8.25 2. Install the J 45858-3 (3), the thrust bearing and the washer (2), and the J 45858-6 (1) over the outer pinion bearing cup bore.
2008 Chevrolet Silverado 1500 2008 Driveline/Axle Front Drive Axle - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 192: Installing Inner Pinion Bearing Cup (8.25 Inch Axle) 3. Install the inner pinion bearing cup and the J 45858-2 (4) to the J 45858-6 (1). Slowly turn the J 45858-6 until the inner pinion bearing cup is evenly seated over the inner
2008 Chevrolet Silverado 1500 2008 Driveline/Axle Front Drive Axle - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
pinion bearing cup bore. 4. Turn the J 45858-6 clockwise slowly in order to draw the inner pinion bearing cup into the inner pinion bearing cup bore. Inspect the position of the inner pinion bearing cup as it is being drawn into the inner pinion 5. Tighten the J 45858-6 until the inner pinion bearing cup is seated in the inner pinion bearing cup bore. 6. Remove the J-45858 . See Special Tools.
2008 Chevrolet Silverado 1500 2008 Driveline/Axle Front Drive Axle - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 193: Installing Outer Pinion Bearing Cup (8.25 Inch Axle) 7. Install the outer pinion bearing cup and the J 45858-1 over the outer pinion bearing cup bore. Fig. 194: Installing Thrust Bearing And Washer Using J 45858-6, Thrust Bearing &
2008 Chevrolet Silverado 1500 2008 Driveline/Axle Front Drive Axle - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Content .. 1372 1373 1374 1375 ..
|
|
|