|
|
Content .. 1035 1036 1037 1038 ..
Fig. 48: View Of White Cover & Natural Colored Lock 1. Place the steering column shift lever back into the park (P) position. 2. Raise the vehicle. 3. Ensure that the transmission manual shaft lever is in the park (P) position. 4. Pull the white cover (1) back to expose the natural colored lock (2). Under the lock (2), insert a flat-bladed screwdriver under the lock ramp located at the top of the lock. The lock
2008 Chevrolet Silverado 1500 2008 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E/4L70-E - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 49: Engaging Shift Cable Ends 5. Push the end of the transmission end (3) inside the shifter end (1) until the blue spring (2) on the transmission end (3) is fully compressed, this will engage the inner wire and lock both
2008 Chevrolet Silverado 1500 2008 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E/4L70-E - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 50: Tension/Adjust Cable System 6. Release the transmission end (3) and allow the spring (2) to tension/adjust the cable system. 7. Pull the white cover (5) on the shifter end (1) back. 8. Push the natural colored lock button (4) down to engage the locking teeth on the transmission end (3). IMPORTANT: DO NOT hold the transmission end (1) during this operation, this will result in a mis-adjusted cable.
2008 Chevrolet Silverado 1500 2008 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E/4L70-E - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 51: View Of White Cover & Natural Colored Lock 9. Release the white cover (1). 10. Verify the white cover (1) conceals the natural colored lock (2). RANGE SELECTOR LEVER CABLE BRACKET REPLACEMENT Removal Procedure
2008 Chevrolet Silverado 1500 2008 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E/4L70-E - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Content .. 1035 1036 1037 1038 ..
|
|
|