|
|
Content .. 1036 1037 1038 1039 ..
Fig. 52: View Of Retainer Securing Cable To Bracket 1. Apply the park brake. 2. Shift the transmission into neutral. 3. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle . 4. Remove the retainer that secures the cable to the bracket. 5. Depress the tangs and remove the cable from the bracket.
2008 Chevrolet Silverado 1500 2008 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E/4L70-E - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 53: View Of Selector Cable Bracket And Cable 6. Remove the bolts (1) securing the transmission range selector cable bracket (2) to the transmission. 7. Remove the transmission range selector cable bracket. Installation Procedure
2008 Chevrolet Silverado 1500 2008 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E/4L70-E - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 54: View Of Selector Cable Bracket And Cable 1. Install the transmission range selector cable bracket. 2. Install the transmission range selector cable bracket bolts (1). Tighten: Tighten the bolts to 25 N.m (18 lb ft). NOTE: Refer to Fastener Notice .
2008 Chevrolet Silverado 1500 2008 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E/4L70-E - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 55: View Of Retainer Securing Cable To Bracket 3. Align and install the cable to the bracket. 4. Install the retainer that secures the cable to the bracket. 5. Lower the vehicle. 6. Check the vehicle for proper operation. If cable adjustment is necessary, refer to Range Selector Lever Cable Adjustment. PARK/NEUTRAL POSITION SWITCH REPLACEMENT Tools Required J 41364-A Park Neutral Switch Aligner. See Special Tools. Removal Procedure
2008 Chevrolet Silverado 1500 2008 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E/4L70-E - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Content .. 1036 1037 1038 1039 ..
|
|
|