Acura TSX / Honda Accord CL. Manual - part 260

z

With the brake lever up, there should be continuity.  

z

With the brake lever down, there should be no continuity.  

Fig. 14: Identifying Parking Brake Switch 
Courtesy of AMERICAN HONDA MOTOR CO., INC. 

REMOVAL & INSTALLATION 

CAUTION: When battery is disconnected, vehicle computer and memory systems 

may lose memory data. Driveability problems may exist until computer 

 

2004 Acura TSX 

2004 BRAKES Disc - TSX

  

 

BRAKE BOOSTER 

Removal 

1. Disconnect negative battery cable.  

2. Remove the master cylinder. See MASTER CYLINDER .  

3. Disconnect the vacuum hose "A" from the brake booster "B". See Fig. 15 .  

4. Remove the underhood fuse/relay box mounting bolt "A", then remove the underhood fuse/relay box. See 

Fig. 16 .  

5. Remove air cleaner assembly "A". See Fig. 17 .  

6. Remove brake lines from hose clamp "A". See Fig. 18 .  

7. Remove lock pin "A" and joint pin "B", then disconnect the yoke from the brake pedal. See Fig. 19 . 

Remove the brake booster mounting flange nuts "C".  

8. Remove the brake booster "A" from the engine compartment. See Fig. 20 .  

systems have completed a relearn cycle. See appropriate COMPUTER 
RELEARN PROCEDURES article in GENERAL INFORMATION before 
disconnecting battery.

NOTE:

Obtain radio anti-theft code and write down radio presets before disconnecting 
battery. Reprogram anti-theft code and radio stations after repairs are complete.

 

2004 Acura TSX 

2004 BRAKES Disc - TSX

  

 

Fig. 15: Disconnecting Master Cylinder Brake Lines & Vacuum Hose 
Courtesy of AMERICAN HONDA MOTOR CO., INC.

 

2004 Acura TSX 

2004 BRAKES Disc - TSX

  

 

Fig. 16: Removing Underhood Fuse/Relay Box 
Courtesy of AMERICAN HONDA MOTOR CO., INC.

 

2004 Acura TSX 

2004 BRAKES Disc - TSX