Acura TSX / Honda Accord CL. Manual - part 261

Fig. 17: Identifying Air Cleaner Assembly 
Courtesy of AMERICAN HONDA MOTOR CO., INC.

 

2004 Acura TSX 

2004 BRAKES Disc - TSX

  

 

Fig. 18: Identifying Hose Clamp 
Courtesy of AMERICAN HONDA MOTOR CO., INC.

 

2004 Acura TSX 

2004 BRAKES Disc - TSX

  

 

Fig. 19: Disconnecting Yoke From Brake Pedal 
Courtesy of AMERICAN HONDA MOTOR CO., INC.

 

2004 Acura TSX 

2004 BRAKES Disc - TSX

  

 

Fig. 20: Removing Brake Booster From Engine Compartment 
Courtesy of AMERICAN HONDA MOTOR CO., INC. 

Installation 

1. To install, reverse removal procedure. Use a new clip when installing. After installing the brake booster 

and master cylinder, fill the reservoir with new brake fluid. Bleed the brake system. See BLEEDING 
BRAKE SYSTEM .  

2. Adjust the brake pedal height and free play. See BRAKE PEDAL HEIGHT & FREE PLAY under 

ADJUSTMENTS.  

3. Perform ECM/PCM relearn cycle. See appropriate COMPUTER RELEARN PROCEDURES article in 

GENERAL INFORMATION.  

4. Reset driver's power window AUTO function. Start the engine. Push down and hold driver's window 

switch until the window is fully open. Pull and hold the driver's window switch to close the window 
completely, then hold the switch for 1-3 seconds. 

 

2004 Acura TSX 

2004 BRAKES Disc - TSX