Isuzu Amigo / Axiom / Trooper / Rodeo / VehiCross. Manual - part 1668

8H–18

SECURITY AND LOCKS

ID Code Additional Registration

This procedure additionally registers a new ID code with
holding registered ID codes. If total number of
registered ID codes and newly registered ID code
exceed four, the oldest one is erased.

Step

Action

Yes

No

1

1. Make sure that the all the doors are closed and unlocked.

2. Open the driver's side door.

3. Insert the starter key into the starter switch.

Is the action complete?

Go to 

Step 2  

— 

2

Turn the starter switch to ACC position and return it to OFF
position quickly three times.

NOTE:  This step must be carried out within five seconds after
step 1 is finished.
Is the action complete?

Go to 

Step 3  Go 

to 

Step 1  

3

Close and open the driver's side door quickly two times.

NOTE:  This step must be carried out within ten seconds after
step 2 is finished.
Is the action complete?

Go to 

Step 4 Go 

to 

Step 1  

4

1. Turn the starter switch to ACC position and return it to OFF

position quickly three times.

2. Close and open the driver's side door quickly one time.

NOTE:  This step must be carried out within ten seconds after
step 3 is finished.
Is the action complete?

Go to 

Step 5  Go 

to 

Step 1  

5

The control unit locks and unlocks the doors two times.
Does the control unit work normally?

Go to 

Step 6  Go 

to 

Step 1  

6

Operate the lock or unlock button of the transmitter.

NOTE:  This step must be carried out within twenty seconds after
step 5 is finished.
Is the action complete?

Go to 

Step 7  Go 

to 

Step 1  

7

The control unit locks and unlocks the doors one time.
Does the control unit work normally?

Go to 

Step 8  Go 

to 

Step 1  

8

Operate the lock or unlock button of the transmitter.

NOTE:  This step must be carried out within twenty seconds after
step 7 is finished.
Is the action complete?

Go to 

Step 9  Go 

to 

Step 1  

9

If registration succeeds, the control unit locks and unlocks the
doors one time.
If registration fails, the control unit locks and unlocks the doors
three times.

Go to 

Step 1  Go 

to 

Step 1 

SECURITY AND LOCKS

8H–19

ID Code Check

This procedure checks how many ID codes are
registered.

Step

Action

Yes

No

1

1. Make sure that the all the doors are closed and unlocked.

2. Open the driver's side door.

3. Insert the starter key into the starter switch.

Is the action complete?

Go to 

Step 2  

—  

2

Turn the starter switch to ACC position and return it to OFF
position quickly three times.

NOTE:  This step must be carried out within five seconds after
step 1 is finished.
Is the action complete?

Go to 

Step 3  Go 

to 

Step 1  

3

Close and open the drive's side door quickly two times.

NOTE:  This step must be carried out within ten seconds after
step 2 is finished.
Is the action complete?

Go to 

Step 4 Go 

to 

Step 1  

4

1. Turn the starter switch to ACC position and return it to OFF

position quickly one time.

2. Close and open the drive's side door quickly one time.

NOTE:  This step must be carried out within ten seconds after
step 3 is finished.
Is the action complete?

Go to 

Step 5  Go 

to 

Step 1  

5

The control unit locks and unlocks the doors twice as many
registered ID codes.

Go to 

Step 1  Go 

to 

Step 1 

8H–20

SECURITY AND LOCKS

Answer Back (Anti-theft Horn Operation) Change Mode

The anti-theft horn sounds when the doors are locked or
unlocked by the keyless entry transmitter operation
when the answer back function is ON, and the horn
does not sound when the function is OFF.

Step

Action

Yes

No

1

1. Make sure that the all the doors are closed and unlocked.

2. Open the driver's side door.

Is the action complete?

Go to 

Step 2  

— 

2

Lock and unlock the driver's side door quickly three times.

NOTE:  This step must be carried out within five seconds after
step 1 is finished.
Is the action complete?

Go to 

Step 3  Go 

to 

Step 1  

3

Close and open the drive's side door quickly two times.

NOTE:  This step must be carried out within ten seconds after
step 2 is finished.
Is the action complete?

Go to 

Step 4 Go 

to 

Step 1  

4

1. Lock and unlock the driver's side door quickly three times.

2. Close and open the driver's side door quickly one time.

NOTE:  This step must be carried out within ten seconds after
step 3 is finished.
Is the action complete?

Go to 

Step 5  Go 

to 

Step 1  

5

If the procedure succeeds, the control unit locks and unlocks the
doors one time.
If the procedure fails, the control unit locks and unlocks the doors
three times.

Go to 

Step 1  Go 

to 

Step 1 

SECURITY AND LOCKS

8H–21

Main Data and Specifications

Torque Specifications

635RY00001