Infiniti EX35. Manual - part 967

FOOT LAMP

INL-105

< ON-VEHICLE REPAIR >

C

D

E

F

G

H

I

J

K

M

A

B

INL

N

O

P

PASSENGER SIDE : Replacement

INFOID:0000000003552682

CAUTION:

• Disconnect the battery negative terminal or remove the fuse.
• Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.

Never touch bulb by hand while it is lit or right after being turned off.

• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect

the performance of lamp. When replacing bulb, be sure to replace it with new one.

FOOT LAMP BULB (PASSENGER SIDE)

1.

Remove the instrument assist lower panel. Refer to 

IP-11, "Exploded View"

.

2.

Rotate the bulb socket counterclockwise and unlock it.

3.

Remove the bulb.

1.

Bulb socket

2.

Bulb

INL-106

< ON-VEHICLE REPAIR >

STEP LAMP

STEP LAMP

Exploded View

INFOID:0000000003135184

Removal and Installation

INFOID:0000000003135185

CAUTION:

Disconnect the battery negative terminal or remove the fuse.

REMOVAL

1.

Insert any appropriate tool into the gap between the step lamp and the door trim. Remove the step lamp.

2.

Disconnect the step lamp connector.

INSTALLATION

Install in the reverse order of removal.

Replacement

INFOID:0000000003135186

CAUTION:

• Disconnect the battery negative terminal or remove the fuse.
• Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.

Never touch bulb by hand while it is lit or right after being turned off.

• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect

the performance of lamp. When replacing bulb, be sure to replace it with new one.

STEP LAMP BULB

1.

Remove the step lamp.

2.

Remove the lens.

3.

Remove the bulb.

1.

Step lamp case

2.

Bulb

3.

Lens

A

Metal  clip

JPLIA1058ZZ

PERSONAL LAMP

INL-107

< ON-VEHICLE REPAIR >

C

D

E

F

G

H

I

J

K

M

A

B

INL

N

O

P

PERSONAL LAMP

Exploded View

INFOID:0000000003135187

NOTE:
Replace the personal lamp case as a set (right and left). After removing the headlining assembly, remove the
personal lamp case. Refer to 

INT-26, "NORMAL ROOF : Exploded View"

.

Removal and Installation

INFOID:0000000003135188

CAUTION:

Disconnect the battery negative terminal or remove the fuse.

REMOVAL

1.

Remove the headlining assembly. Refer to 

INT-26, "NORMAL ROOF : Exploded View"

.

2.

Insert any appropriate tool into the gap between the lens. Remove the lens.

3.

Press the both side pawls (A) to the arrow direction (

).

Remove the personal lamp finisher.

4.

Remove the personal lamp case from the headlining assembly.

NOTE:
Replace the personal lamp case as a set (right and left).

INSTALLATION

Install in the reverse order of removal.
NOTE:
The following is easier to install the personal lamp finisher.

1.

Personal lamp case

2.

Personal lamp finisher

3.

Lens

4.

Bulb

JPLIA0936ZZ

JPLIA0087ZZ

INL-108

< ON-VEHICLE REPAIR >

PERSONAL LAMP

• Press the personal lamp finisher to the headlining. Pull the per-

sonal lamp case pawl to the arrow direction (

) with any appropri-

ate tool.

Replacement

INFOID:0000000003135189

CAUTION:

• Disconnect the battery negative terminal or remove the fuse.
• Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.

Never touch bulb by hand while it is lit or right after being turned off.

• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect

the performance of lamp. When replacing bulb, be sure to replace it with new one.

PERSONAL LAMP BULB

1.

Insert any appropriate tool into the gap between the lens. Remove the lens.

2.

Remove the bulb.

JPLIA0937ZZ