345

(XI) Cpillar inside trim and rear door sill

C pillar inside trim and rear door sill diagram:

C pillar inside trim& rear door sill diagramdiagram

1.Right C Pillar Upper Inside Trim

2.Left C Pillar  Upper Inside Trim

3. Right C Pillar Upper Inside

Trim Sound Insulator

4.  Left Sound Insulator

5. Right C Pillar Lower Inside Trim

6. Left C Pillar

Lower Inside Trim             7. Right Rear Door  Sill

8. Left Rear  Door Sill

9. E-Clip

10. Cross Pan

Head Self-tapping Screw       11. D-Clip

1. Removal

1

Remove the installed door sill and C pillar lower inside trim tapping screw and E-clip with a cross

screwdriver;

2

Remove C pillar upper inside trim with a opener ;

3

Remove C pillar lower inside trim with a opener

2.Installation

1

 Clip C pillar inside trim and rear door sill onto the corresponding position in order;

2

Tap C pillar upper inside trim and C pillar lower inside trim lightly with a rubber hammer to ensure D-clip

clipped in the vehicle inner panel;

3

Fix the rear door sill onto the vehicle body with a tapping screw.

11

2 

1

10

8

4

3

5

7

9

6

346

(XII) Roof inside trim

Roof Inside Trim Diagram:

Roof inside trim diagram

1. Roof Inside Trim

2. Left Sun Visor Bracket

3. Right Sun Visor Bracket

4. 

Cross Semi-

Countersunk Screw

5. Left  Sun Visor Assembly

6. Right  Sun Visor Assembly

7 .  

C r o s s

Counter Sunk Tapping Screw

8. Glass Box Assembly

9. Right Front Handle Assembly

1 0 .   L e f t

Rear Handle Assembly

11. Right Rear  Handle Assembly

12. E-Clip

13. Roof Rear Heat Insulator

14. Roof Front Heat Insulator

15. Cross Slot Head Screw

1. Removal

1

Remove the safe handle, map lamp, left/right A pillar inside trim, left/right B pillar upper inside trim, left/

right C pillar upper inside trim;

2

Remove the screw used to install left/right sun visor assembly with a cross screwdriver. Remove the left/

right sun visor assembly

3

Remove the plastic clip used to install roof inside trimassembly with opener. Remove the lower dome

lamp connector and roof inside trimassembly.

2. Installation

1

Install the dome lamp connector into the corresponding hole and clip the plastic clip onto the corresponding

hole in the vehicle body. Fix the roof inside trimassembly;

2

Install the safe handle to the corresponding position on the trim board on the right front pillar with a

tapping screw and clip the safe handle cover;

3

Install the left, right sun visor onto the roof inside trimassembly with a tapping screw and fix it to the

corresponding hole on the vehicle body;

4

Install left/right A pillar inside trim, left/right B pillar upper inside trim, left/right C pillar upper inside trim.

 

2 

1

3 

4 

5 

6 

7 

8 

9 

10

11

12 

13 

14

15

347

(XIII) Carpet and Heat Insulator

Carpet and Heat Insulator Diagram

Carpet and Heat Insulator Diagram

1. Carpet

2. Cowl Lower Sound Insulator

3. Cowl  Upper Sound Insulator

4. 

Cowl Outer

Panel Heat Insulator

5. Foot Pedal

6.  Cross Pan Head Screw

7. Floor Sound Insulator

1. Removal

1

Remove the front and rear seats, left front door sill, right front door sill, right B pillar lower inside trim, left

B pillar lower inside trim, right rear door sill, left rear door sill, front and rear part of the auxiliary console;

2

Remove the cross pan head screw and remove the foot pedal.

3

Remove carpet and cowl lower sound insulator, cowl upper sound insulator, cowl outer panel heat insulator.

2. Installation

1

Install the accelerator pedal assembly, brake and clutch pedal assembly, parking brake control mechanism

assembly onto the vehicle body;

2

Install the carpet to the corresponding hole. Install both sides of the carpet under the left front door sill,

right front door sill, right B pillar lower inside trim, left B pillar lower inside trim, right rear door sill, left

rear door sill.

1   

2

7

3

4

6

5

348

(XIV) Rear trunk Inside Trim

Rear trunk inside Trim Diagram :

Rear trunk Inside Trim Diagram

1. Right Rear Quarter Trim

2. Left Rear Quarter Trim             3. Lower Rear Board Trim Assembly

4. Spare Tire Press Plate Assembly

5. Rear trunk Stuck Plate 6. Right Rear Combination Lamp Access

Hole Cover 7. Left Rear Combination Lamp Access Hole Cover

8. Rear Partition Inside Trim

9. Rear trunk Miscelleaneous Box10. J-Clip ( Rear Quarter Trim )      11. R i g h t   O u t s i d e

Sound Insulator

13. Right Rear Wheel-

house Sound Insulator

14. Right Rear Wheelhouse  Sound Insulator

15. Right Speaker Grill

16. Left Speaker Grill

17. Rear Damper Cover

1. Removal

1

Remove the connector and remove the high mounted stop lamp;

2

Remove C pillar upper inside trim;

3

Remove the rear partition inside trim ;

4

Remove the right speaker grill and left speaker grill with a cross screwdriver;

5

Remove the lower rear board trim assembly clip with opener. Remove the lower rear board trim assembly;

6

Remove the right rear combination lamp access hole cover, left rear combination lamp access hole cover

7

Remove the clip installed at the left and right rear quarter trim with a cross screwdriver;

8

Remove the clip installed at the left and right rear quarter trim with an opener;

9

Remove the rear damper cover;

 

 

1 

2 

3 

4 

5 

6 

7 

8 

9 

10

11 

12 

13 

14

15 

16 

17 

12. Left Outside Wheelhouse 

Wheelhouse

 Sound Insulator