|
|
18– 101 18 c. Check if the transmission wire harness connector is dirty, oxidized, loose or damaged. a. Turn ignition switch to LOCK and disconnect the negative battery cable. b. Disconnect the wire harness connectors E-052 and E-030. c. Check for continuity between the terminals 6 and 10 of wire harness connector E-052 and terminals 34 and 3 of a. Turn ignition switch to LOCK and disconnect the negative battery cable. b. Disconnect the wire harness connector E-030. harness connector E-030 and ground. Repair fault NG 2 Check engine compartment wire harness OK - + RT21181260 E-030 29 30 31 32 33 34 35 36 37 38 39 40 41 42 1 2 3 4 5 6 7 8 9 10 11 12 13 14 43 44 45 46 47 48 49 50 51 52 53 54 55 56 15 16 17 18 19 20 21 22 23 24 25 26 27 28 E-052 6 5 4 3 2 1 7 8 9 10 Repair or replace failed circuit NG 3 Check for continuity between wire harness connector E-030 and ground OK - + RT21181270 E-030 29 30 31 32 33 34 35 36 37 38 39 40 41 42 1 2 3 4 5 6 7 8 9 10 11 12 13 14 43 44 45 46 47 48 49 50 51 52 53 54 55 56 15 16 17 18 19 20 21 22 23 24 25 26 27 28 Repair or replace failed circuit NG OK |