|
|
Coolant hose to the transmission 5. Fit the coolant hoses and container. Location Explanation Type Basic Tolerance 1 Tolerance 2 Container for Fastening screws between Tightening 10 (7.5 ftlb.) Nm Cross member 6. Remove the cross member Location Explanation Type Basic Tolerance 1 Tolerance 2 Cross Fastening screws between cross Tightening 65 (48 ftlb.) Nm Subsequent work Subsequent work 1. Install cardan shaft. → 390219 Removing and installing cardan shaft - chapter on "Installing" 2. Check transmission oil and, if necessary, top up. → 340101 Checking transmission oil Diagnostic system: reading out fault memory and activating systems Subsequent work 925 |