|
|
Insert fastening screws -3- on starter, screw into the engine housing and tighten → Tightening torque: 33 Tighening electrical leads to starter 3. Position electrical leads on the starter and tighten with fastening nuts -1, 2- . → Tightening torque: 13 ftlb. → Tightening torque: 5.0 ftlb. 4. Fit caps on fastening nuts. Subsequent work Subsequent work - starter → 244219 Removing and installing throttle body - chapter on "installing" 997110, 997111, 997120, 997121, 997310, 997311, 997320, 997321, 997410, 997411, 997430, 997431, WARNUNG Gefahr des Verlusts der Text-Bild-Zuordnung beim Ausdruck. Aus technischen Gründen kann derzeit nicht ausgeschlossen werden, dass trotz • Diagnostic system: reading out fault memory and activating systems Installing starter 817 |