Volkswagen Golf / Golf GTI / Jetta. Manual - part 1239

 

Warnings regarding use of product.

RAPGARD adhesive residue remains on paint finish, 
remove with a non-abrasive polishing product such as light 
colors or dark colors. 

Thick lines of adhesive residue can be removed with 
general purpose adhesive cleaner or equivalent. 

Note: 

Paint discoloration (looks like shaded or dark magic marker 
lines) can be removed with a heat gun using following 
procedure:  
 

- Hold heat gun approximately 3 in. away from affected 
paint surfaces and apply heat using slow oscillating 
motions until discoloration is gone. 

- If discoloration remains, wipe heated area with Isopropyl 
alcohol and repeat procedure to increase surface drying. 

 

Important!

After inspecting and removing RAPGARD, washing vehicle, 
inspecting and repairing any defects in paint surfaces, 
moldings and glass: 

- Protect vehicle paint surface by applying 3M Perfect-It 
Paste Wax or equivalent. 

RAPGARD Disposal 

RAPGARD can be disposed as normal paper waste. If 
unsure about proper disposal procedures in your area, 
check local regulations. 

Perform test drive

 

 

To what extent the following can be checked is dependent 
upon the vehicle equipment and local conditions 
(urban/country).

 

The following should be checked by means of a road test:

- Engine: Output, misfiring, idling speed, acceleration 

- Clutch: Pulling away, pedal pressure, odors 

- Gear selection: Ease of operation, shift lever position  

- Automatic transmission: Selector lever position, shiftlock / 
ignition key interlock, shift behavior, display in instrument 

Description of work (part 2 of 2)

13/2/2005