Toyota ProAce (2017 year). Instruction

Access

If your vehicle is not fitted with an

Power door locking*

Using the remote control

alarm, locking is confirmed by the fixed

To lock the vehicle:

illumination of the direction indicators

Power door locking renders the exterior

F Press this button.

for about two seconds.

and interior door controls inoperative.

According to version, the door mirrors

It also deactivates the manual central

fold at the same time.

control button.

Therefore, never leave anyone inside

Depending on version, the door mirrors

the vehicle when it is power door

fold at the same time.

locked.

If one of the openings (doors or boot) is

still open, the central locking does not

take place.

Using the key

To power door lock the vehicle:

When the vehicle is locked, if it is

unlocked inadvertently, it will lock itself

F Then within five seconds after

again automatically after about thirty

locking, press this button again.

seconds unless a door is opened.

And if your vehicle has an alarm, this

will be reactivated (with volumetric

If your vehicle is not fitted with an

monitoring, even if this had been

alarm, power door locking is signalled

deactivated).

by the fixed illumination of the direction

The folding and unfolding of the door

indicators for about two seconds.

mirrors by the remote control can be

deactivated by an authorized Toyota

dealer or repairer, or another duly

qualified and equipped professional.

To power door lock the vehicle:

F Turn the key to the rear of the vehicle.

F Then within five seconds, turn the key to

the rear again.

* If equipped.

Access

If fitted to your vehicle, pressing

Locating your vehicle

Anti-theft protection

and holding this button allows the

This function allows you to identify your vehicle

windows to be closed. The window

from a distance, particularly in poor light. Your

Electronic engine immobiliser

stops when you release the button.

vehicle must have been locked for more than

The remote control contains an electronic chip

five seconds.

which has a special code. When the ignition is

switched on, this code must be recognised in

F Press this button

order for starting to be possible.

This electronic engine immobiliser locks the

engine management system a few moments

This switches on the courtesy lamps and the

after the ignition is switched off and prevents

Ensure that no person or object could

direction indicators flash for about ten seconds.

starting of the engine by anyone who does not

prevent the correct closing of the

have the key.

windows.

Be particularly aware of children when

In the event of a fault, you are

operating the windows.

Remote operation of lighting

informed by illumination of this

warning lamp, an audible signal and

If fitted to your vehicle.

a message in the screen.

A short press on this button switches

In this case, your vehicle will not start; contact

on the lighting remotely (sidelamps,

an authorized Toyota dealer or repairer,

dipped beam headlamps and number

or another duly qualified and equipped

plate lamps).

professional as soon as possible.

Keep safely, away from your vehicle,

A second press on this button before

the label attached to the keys given to

the end of the timed period cancels

you on acquisition of the vehicle.

the remote lighting.

Access

Locking the sliding side door

Back-up control(s)

F If fitted to your vehicle, check that the

For mechanically locking and unlocking the doors in the event of a fault with the central locking

electric child lock is not on.

system or a battery failure.

F Open the door.

Locking the driver's door

Locking the front passenger door

F Open the door.

F Remove the cap on the edge of the door.

F Insert the key into the latch aperture

F Insert the key in the door lock and turn it to

(without forcing) and turn the assembly.

the rear.

F Remove the key and refit the cap.

F Remove the cap on on the edge of the

F Close the door and check from the outside

door.

Unlocking

that it has locked correctly.

F Insert the key into the latch aperture

F Insert the key in the door lock and turn it to

(without forcing) and turn the assembly.

the front.

F Remove the key and refit the cap.

F Close the door and check from the outside

Unlocking

that it has locked correctly.

If your vehicle has an alarm, it will not

F Use the interior door handle.

be deactivated/activated on unlocking/

locking the vehicle.

Unlocking

For more information on the Child lock,

Opening a door will trigger the alarm,

refer to the corresponding section.

which can be stopped by switching on

Use the interior door handle.

the ignition.

Access

Locking the rear wing doors with

Remote control problem

Changing the battery

glass windows

Battery ref.: CR1620 / 3 volts.

Following disconnection of the vehicle battery,

If fitted to your vehicle, check that the

If the battery is flat, you are

replacement of the remote control battery or

electric child lock is not on.

informed by lighting of this warning

in the event of a remote control malfunction,

Open the left-hand door.

lamp in the instrument panel, an audible signal

you can no longer unlock, lock or locate your

and a message in the screen.

vehicle.

F First of all, use the key in the lock to unlock

or lock your vehicle.

F Then reinitialise the remote control.

If the problem persists, contact an authorized

Toyota dealer or repairer, or another duly

qualified and equipped professional as soon as

possible.

Reinitialisation

F Lock the driver's door using

the key.

Insert the key into the latch aperture on the

F Press one of the remote control

Unclip the cover using a screwdriver in the

edge of the door (without forcing) and slide

buttons.

cut-out.

the assembly upward.

Remove the cover.

Remove the key.

Extract the flat battery from its location.

Close the door and check from the outside

Place the new battery into its location

that it has locked correctly.

observing the original direction.

Clip the cover in place.

Unlocking

Do not throw the remote control

F Use the interior door handle.

F Turn the key to position 2 (Ignition on).

batteries away, they contain metals

F Switch off the ignition and remove the key

which are harmful to the environment.

from the ignition switch.

Take them to an approved collection

The remote control is fully operational again.

point.

Access

What is the point

Programming

"Smart Entry & Start

of total or selective

System"

unlocking?

Remote control

Total unlocking allows all of the vehicle's doors

(front, side and rear) to be unlocked.

F To activate this selectivity

between cab and loading

area, switch the ignition on and

press this button for more than

2 seconds.

Its indicator lamp comes on.

F To deactivate this selectivity and

It allows the central locking or unlocking of the

return to total unlocking, switch

Selective unlocking allows either the cab

vehicle from a distance.

the ignition on and press this

doors, or the loading area doors (side and

It is also used to locate and start the vehicle, as

button for more than 2 seconds.

rear) to be unlocked.

well as providing protection against theft.

Its indicator lamp goes off.

The modification is confirmed by an audible

This separation of cab and loading

signal and, depending on equipment, the

area locking provide security in use.

display of a message.

It allows you to prevent access to the

part of the vehicle where you are not

present.

By default, selectivity between cab and

loading area is activated.

Access

Total unlocking

With electric sliding side door(s)

Selective unlocking

F To totally unlock the vehicle

without opening the side door,

Cab and loading area selectivity

press this button.

deactivated.

activated.

F Press one of these buttons

F To unlock only the cab doors,

(depending on equipment) to

make an initial press on this

unlock the vehicle.

button.

F To totally unlock the

vehicle and open the

F To unlock the loading area

side door, press and

doors (side and rear), press on

hold this button until the

this button again.

door has opened.

If fitted to your vehicle, pressing

and holding this button allows the

windows to be opened. The window

stops when you release the button.

Unlocking is signalled by the rapid

If fitted to your vehicle, pressing

flashing of the direction indicators for

and holding this button allows the

about two seconds.

windows to be opened. The window

Depending on version, the door mirrors

stops when you release the button.

unfold at the same time.

If fitted to your vehicle:

F Press on this button to unlock the

loading area only.

Access

With electric sliding side door(s)

Unlocking

Locking

F To totally lock the vehicle, press

To unlock the loading area only

this button.

without opening the side door,

press on this button.

F To unlock the vehicle, press this

If fitted to your vehicle, pressing

button.

and holding this button allows the

windows to be closed. The window

stops when you release the button.

With electric sliding door(s)

F To unlock the loading

area only and open the

side door, press and

F To unlock the vehicle

hold this button until the

and open the side door,

door has opened.

Ensure that no person or object could

press and hold this

prevent the correct closing of the

button until the door has

windows.

opened

Be particularly aware of children when

operating the windows.

Unlocking is signalled by the rapid

flashing of the direction indicators for

about two seconds.

If a door is not correctly shut (except

Unlocking is signalled by the rapid

Depending on version, the door mirrors

the right-hand door with rear wing

flashing of the direction indicators for

unfold at the same time.

doors with glass windows):

about two seconds.

vehicle stationary and the engine

Depending on version, the door mirrors

running, this warning lamp

unfold at the same time.

comes on, accompanied by an

alert message for a few seconds,

vehicle moving (speed above

6 mph (10 km/h)), this warning

lamp comes on, accompanied

by an audible signal and an alert

message for a few seconds.

Access

To deadlock the vehicle:

Driving with the doors locked may make

Power door locking*

access to the passenger compartment

F Then within five seconds after

by the emergency services more difficult

Power door locking renders the exterior

locking, press this button again.

in the event of an emergency.

and interior door controls inoperative.

As a safety measure (children on board),

It also deactivates the manual central

never leave the vehicle without your

control button.

If your vehicle is not fitted with an

remote control, even for a short period.

Therefore, never leave anyone inside

alarm, power door locking is signalled

the vehicle when it is power door

by the fixed illumination of the direction

If your vehicle is not fitted with an

locked.

indicators for about two seconds.

alarm, locking is signalled by the fixed

illumination of the direction indicators

for about two seconds.

Depending on version, the door mirrors

fold at the same time.

To lock the vehicle:

F Press this button.

If fitted to your vehicle, pressing

If one of the doors remains open, the

and holding this button allows the

central locking does not take place.

windows to be closed. The window

If the vehicle is inadvertently unlocked,

stops when you release the button.

it will automatically lock itself again

Depending on version, the door mirrors

after about thirty seconds, if no door is

fold at the same time.

opened.

And if fitted to your vehicle, the alarm is

reactivated (with volumetric monitoring,

even if you had deactivated it).

Ensure that no person or object could

prevent the correct closing of the

windows.

The automatic folding and unfolding of the

Be particularly aware of children when

electric door mirrors can be deactivated by an

operating the windows.

authorized Toyota dealer or repairer, or another

duly qualified and equipped professional.

* If equipped.

Access

"Smart Entry & Start

In the ignition on (accessories) position,

The folding and unfolding of the door

System" on your person

with the "START/STOP" button, the

mirrors by the remote control can be

hands-free function is deactivated.

deactivated by an authorized Toyota

For more information on "Smart

dealer or repairer, or another duly

Entry & Start System" and in particular

qualified and equipped professional.

the "ignition on" position, refer to the

corresponding section.

As a safety measure (children on

board), never leave the vehicle without

taking your Smart Entry & Start System

remote control, even for a short period.

The unlocking, locking or power door

Guard against theft when the Smart

locking does not take place:

Entry & Start System remote control is

This allows the unlocking, locking and starting

if the ignition is on,

in the recognition zone with the vehicle

the vehicle while keeping the remote control on

if one of the doors or the boot is still

unlocked.

your person.

open,

In order to preserve the charge of the

if the key for the Smart Entry &

cell battery in the remote control, the

Start System has been left inside

"hands-free" functions go into extended

the vehicle.

stand-by after 21 days of non-use.

When the vehicle is locked (with the

To restore these functions, press one of

remote control or Smart Entry & Start

the remote control buttons or start the

System), if it is unlocked inadvertently, it

engine with the remote control at the

will lock itself again automatically after

reader.

about thirty seconds unless a door has

been opened.

And if your vehicle has an alarm, this

will be reactivated (with volumetric

monitoring, even if this had been

deactivated).

Access

Total unlocking

With electric sliding slide door(s)

With rear tailgate

Cab and loading area selectivity

deactivated.

F To unlock the vehicle, remote control on

your person and in the recognition zone A,

pull and release the door handle. This

pull the rear tailgate handle.

action also triggers the electrically powered

F Raise the rear tailgate.

opening of the corresponding door.

F To unlock the vehicle, remote control

on your person and in the recognition

zone A, pass your hand behind one of the

door handles (front doors, manual sliding

side doors or rear wing doors with glass

Unlocking is signalled by the rapid

windows).

flashing of the direction indicators for

F Pull the handle to open the corresponding

about two seconds.

door.

Depending on version, the door mirrors

unfold and the alarm is deactivated.

Access

Selective unlocking

With electric sliding slide door(s)

Cab and loading area selectivity

activated.

F To unlock the loading area only, remote

F To unlock the loading area, remote control

control on your person and in the

on your person and in the recognition

recognition zone A, B or C, pass your

zone A and B, pull and release the

hand behind the door handle on one of the

door handle. This action also triggers

doors, left, right or rear.

the electrically powered opening of the

F To unlock the cab only, remote control on

F Pull on the handle to open the

corresponding door.

your person in the recognition zone A or B,

corresponding door.

pass your hand behind one of the front

door handles.

F Pull the handle to open the corresponding

Depending on version, the door mirrors

door.

unfold only on unlocking the cab, the

alarm is deactivated

The state of the locks for the loading

area doors remains unchanged.

Access

Unlocking

With electric sliding slide door(s)

With rear tailgate

F To unlock the vehicle, remote control

F To unlock the vehicle, remote control on

on your person and in the recognition

your person and in the recognition zone A,

F To unlock the vehicle, remote control on

zone A, pull and release the door handle to

pull the rear tailgate handle.

your person and in the recognition zone A,

trigger the electric powered opening of the

F Raise the rear tailgate.

pass your hand behind one of the door

corresponding door.

handles (front doors, manual sliding side

doors and rear wing doors with glass

windows).

F Pull the handle to open the corresponding

door.

Unlocking is signalled by the rapid

flashing of the direction indicators for

about two seconds.

Depending on version, the door mirrors

unfold, the alarm is deactivated.

Access

Locking

With electric sliding side door(s)

With rear wing doors with glass

windows

F To totally lock the vehicle, with the remote

control in the recognition zone A, press

F To totally lock the vehicle, with the remote

F To lock the vehicle, with the remote control

with a finger or thumb at the markings on

control in the recognition zone A, press

in the recognition zone A, press the left-

one of the front or manual sliding side door

with a finger or thumb at the markings on

hand door locking control.

handles.

one of the front door handles.

If a door is not properly closed

(except the right-hand door with rear

wing doors with glass windows):

vehicle stationary and the engine

running, this warning lamp

comes on, accompanied by an

alert message for a few seconds,

vehicle moving (speed above

6 mph (10 km/h)), this warning

lamp comes on, accompanied

by an audible signal and an alert

message for a few seconds.

Access

With a rear tailgate

If your vehicle is not fitted with an

Power door locking*

alarm, locking is confirmed by fixed

illumination of the direction indicators

Power door locking renders the exterior

for about two seconds.

and interior door controls inoperative.

Depending on version, the door mirrors

It also deactivates the manual central

fold at the same time.

locking button.

Therefore, never leave anyone inside

the vehicle when it is power door

locked.

Driving with the doors locked may

render access for the emergency

services difficult in an emergency.

F To lock the vehicle, with the remote control

in the recognition zone A, press the rear

tailgate locking control.

If fitted to your vehicle, pressing and

holding the locking controls allows

the windows to be opened. The

window stops when you release the

F To totally lock the vehicle, with the remote

button.

control in the recognition zone A, press

with a finger or thumb at the markings on

one of the front or manual sliding side door

Ensure that no one might prevent the

handles.

correct operation of the windows.

F To deadlock the vehicle, press the marking

Be particularly aware of children when

again within five seconds.

operating the windows.

* If equipped.

Access

With electric sliding side door(s)

With rear wing doors with glass

With a rear tailgate

windows

F To totally lock the vehicle, with the remote

F To lock the vehicle, with the remote control

control in the recognition zone A, press

in the recognition zone A, press the left-

in the recognition zone A, press the rear

with a finger or thumb at the markings on

hand door locking control.

tailgate locking control.

one of the front door handles.

F To powerlock the vehicle, press the control

F To deadlock the vehicle, press the control

F To deadlock the vehicle, press the marking

again within five seconds.

If your vehicle is not fitted with an alarm,

deadlocking is confirmed by fixed

illumination of the direction indicators

for about two seconds.

Access

Locating your vehicle

Anti-theft protection

This function allows you to identify your vehicle

from a distance, particularly in poor light. Your

Electronic engine immobiliser

vehicle must have been locked for more than

The remote control contains an electronic chip

five seconds.

which has a special code. When the ignition is

switched on, this code must be recognised in

F Press this button

order for starting to be possible.

This electronic engine immobiliser locks the

engine management system a few moments

after the ignition is switched off and prevents

This switches on the courtesy lamps and the

starting of the engine by anyone who does not

direction indicators flash for about ten seconds.

have the key.

In the event of a fault, you are

Remote operation of lighting

informed by illumination of this

If fitted to your vehicle.

warning lamp, an audible signal and

A short press on this button switches

a message in the screen.

on the lighting remotely (sidelamps,

In this case, your vehicle will not start; contact

dipped beam headlamps and number

an authorized Toyota dealer or repairer,

plate lamps).

or another duly qualified and equipped

professional as soon as possible.

A second press on this button before

Keep safely, away from your vehicle,

the end of the timed period cancels

the label attached to the keys given to

the remote lighting.

you on acquisition of the vehicle.

Toyota ProAce (2017 year). Instruction - part 4