|
|
INSPECTION PROCEDURE NOTICE: Perform the universal trip to clear permanent DTCs
. HINT: The shift solenoid valve S3 is turned ON/OFF normally when the shift lever is in D: ECM gear shift command 1st 2nd 3rd 4th 5th 6th Shift solenoid valve S3 ON ON ON OFF OFF OFF PROCEDURE 1. INSPECT TRANSMISSION WIRE (SHIFT SOLENOID VALVE S3) (a) Disconnect the D83 transmission wire connector. (b) Measure the resistance according to the value(s) in the table below. Standard Resistance: TESTER CONNECTION CONDITION SPECIFIED CONDITION A760F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMISS... |