|
|
02-15 0000-00 Electrical equipment ▶ Electric devices should be handled more carefully. Currently, the engine has a lot of electric devices. there could be poor engine performance, incomplete combustion and other abnormal symptoms due to short circuit or poor contact. Before work on engine and each electrical equipment, be sure to disconnect battery negative (-) terminal. When replacing the electric device, use only genuine part and check the conditions of connections and grounds. Loosened connection or ground make cause a fire and personal injury. - - Fuel and lubrication system ▶ Do not allow the fluid and engine oil to make contact with the body paintwork and hoses. If work on the fluid system such as fuel and oil, working area should be well ventilated and smoking should be prohibited. Gasket or seal on the fuel/lubrication system should be replaced with new ones and bolts and nuts should be tightened as specified. After removal/installation works, be sure to check whether there is leak on the connecting section. - - - - If fine dust or foreign material enters into DI engine's fuel system, there can be serious damages in HP pump and injectors. Thus, be sure to plug the inlets of removed fuel line components with cap and protect removed parts not to be contaminated with dirt. (Refer to cleanness in this manual while working on DI engine fuel system) |