|
|
ABS AND TCS 4F-43 SSANGYONG MY2002 Step 2 3 4 5 6 7 8 9 10 11 12 DTC 04 - Right Front Wheel Speed Sensor Fault (Cont’d) Action Go to Step 4 System OK Go to Step 6 System OK Go to Step 7 System OK Go to Step 9 System OK Go to Step 11 System OK System OK Go to Step 3 - Go to Step 5 - Go to Step 8 - Go to Step 10 - Go to Step 12 - - 1280 - 1920 Ω - ≈ 70 mv - >1v - ∞ - >5 Ω - - 1. Turn the ignition to LOCK. connector. 3. Use a digital voltmeter (DVM) to measure resis- tance between the sensor terminals. Is the resistance within the specified value at approxi- speed sensor terminals while rotating the wheel Is the output within the specified value? the wheel speed connector. 3. Turn the ignition to ON. wheel speed connector. Is the voltage for either of these terminals within the at the harness EBCM connector. 3. Measure the resistance to ground from terminal 15 at the harness EBCM connector. Is the resistance at either circuit less than the speci- harness EBCM connector and the harness wheel 2. Measure the resistance between terminal 15 at the harness EBCM connector and the harness wheel Is the resistance on either circuit within the specified Value(s) Yes No |