|
|
|
GENERAL ENGINE INFORMATION 1A3 -- 15 DAEWOO MY_2000 GENERAL INFORMATION CLEANLINESS AND CARE An automobile engine is a combination of many ma- chined, honed, polished and lapped surfaces with toler- ances that are measured in the ten--thousanths of an inch. When any internal engine parts are serviced, care and cleanliness are important. A liberal coating of en- igne oil should be applied to friction areas during assem- bly, to protect and lubricate the surfaces on initial operation. Proper cleaning and protection of machined surfaces and friction areas is part fo the repair proce- dure. This is considered standard shop practice even if not specifically stated. vice, they should be kept in order. They should be installed in the same locations, and with the same mat- ing surfaces, as when they were removed. work is performed on the engine. Failure to disconnect cables may result in damage to wire harness or other electrical parts. ON--ENGINE SERVICE Caution: Disconnect the negative battery cable be- fore removing or installing any electrical unit, or when a tool or equipment could easily come in con- tact with exposed electrical terminals. Disconnect- ing this cable will help prevent personal injury and damage to the vehicle. The ignition must also be in LOCK unless otherwise noted. opening should be covered. This will protect against ac- cidental entrance of foreign material, which could follow the intake passage into the cylinder and cause exten- sive damage when the engine is started. |