Opel Frontera UBS. Manual - part 884
10A–8 CRUISE CONTROL SYSTEM
Removal
1. Disconnect the battery ground cable.
2. Remove the cruise actuator Assembly (4).
D
Disconnect the connector (3).
D
Remove the cable end (1) from the cam link (cruise
control side).
D
Loosen two fixing nuts (2).
D
Remove three actuator fixing screws.
825RW049
Installation
To install, follow the removal steps in the reverse order,
noting the following point.
1. Take care not to bend the cable excessively.
Mode Switch
Removal and Installation
Refer to the Mode Switch removal and installation steps
in Automatic Transmission section.