|
|
4C–33 DRIVE SHAFT SYSTEM 412RS037 Reassembly 1. Install the new oil seal which has been immersed in differential gear oil, by using an oil seal installer 412RS043 2. Force a new needle bearing into inner shaft by using a installer 5–8840–2408–0 and grip 5–8840–0007–0. 412RS051 3. Place a new snap ring(internal) in inner shaft. Force a new inner shaft bearing into the inner shaft by 412RS044 4. Install snap ring(external). NOTE: Be careful not to damage the inner shaft. 5. Clean the housing contact surface of the front axle case and insert inner shaft assembly into the front |