|
|
5A–14 BRAKE CONTROL SYSTEM Getting Started • Before operating the Isuzu PCMCIA card with the Tech 2, the following steps must be performed: 1. The Isuzu 98 System PCMCIA card inserts into the Tech 2. 2. Connect the SAE 16/19 adapter to the DLC cable. 3. Connect the DLC cable to the Tech 2. 4. Mark sure the vehicle ignition is off. 5. Connect the Tech 2 SAE 16/19 adapter to the vehicle DLC (1). 740RW165 6. The vehicle ignition turns on. 7. Power up the Tech 2. 8. Verify the Tech 2 power up display. 060RW009 Operating Procedure The power up screen is displayed when you power up 060RX065 |