Nissan Leaf (2022 year). Manual in english - page 13

 

  Index      Manuals     Nissan Leaf (2022 year). Manual in english

 

Search            copyright infringement  

 

 

 

 

 

 

 

 

 

 

 

Content      ..     11      12      13      14     ..

 

 

 

Nissan Leaf (2022 year). Manual in english - page 13

 

 

The light will turn off after approximately 2
seconds if the system is operational. If the
light does not come on, have the system
checked. It is recommended that you visit a
NISSAN certified LEAF dealer for this service.

Vehicle Dynamic Control
(VDC) OFF indicator light

This light illuminates when the Vehicle Dy-
namic Control (VDC) is turned off in the
vehicle information display. This indicates
that the VDC system is not operating. For
additional information, see “Vehicle Dy-
namic Control (VDC) system” (P. 5-164).

WARNING/INDICATOR LIGHTS
(other)

For additional information, see “Vehicle in-
formation display” (P. 2-26)

Exterior light
indicator light (green)

This indicator illuminates when the head-
light switch is turned to the AUTO,

or

position and the front parking lights,

side marker lights, tail and license plate
lights are on. The indicator turns off when
these lights are turned off.

Front fog light indicator
light (green) (if so
equipped)

The front fog indicator light illuminates
when the front fog lights are on. For addi-
tional information, see “Fog light switch”
(P. 2-55).

High Beam Assist indicator
light (green)

The indicator light illuminates when the
headlights come on while the headlight
switch is in the AUTO position with the high
beam selected. This indicates that the high
beam assist system is operational. For ad-
ditional information, see “Headlight beam
select” (P. 2-51).

High beam indicator light
(blue)

This light illuminates when the headlight
high beam is on and goes out when the low
beam is selected.

Plug-in
indicator light (green)

This light illuminates when the charge con-
nector is connected to the vehicle and
blinks during charging.

NOTE:

If the charge connector is connected to
the vehicle, the power switch cannot be
placed in the READY to drive position.

READY to drive
indicator light (green)

The READY to drive indicator light illumi-
nates when the EV system is powered and
the vehicle may be driven.

The READY to drive indicator light will turn
off in the following conditions.
• Certain EV system malfunctions.
• The READY to drive indicator light turns

off immediately before the Li-ion battery
is completely discharged. If the Li-ion bat-
tery becomes completely discharged,
the vehicle must be charged in order to
be driven. For additional information, see
“Low battery charge indicator” (P. 2-36).

2-24

Instruments and controls

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Turn signal/hazard
indicator lights (green)

This light flashes when the turn signal
switch lever or hazard switch is turned on.

AUDIBLE REMINDERS

Brake pad wear warning

The disc brake pads have audible wear
warnings. When a brake pad requires re-
placement, it will make a high-pitched
scraping sound when the vehicle is in mo-
tion. This scraping sound will first occur
only when the brake pedal is depressed.
After more wear of the brake pad, the
sound will always be heard even if the
brake pedal is not depressed. Have the
brakes checked as soon as possible if the
warning sound is heard.

Electric shift control system
reminder chime

If an improper shift operation is performed,
for safety reasons a chime will sound and
at the same time, depending on the condi-
tions, the operation will be canceled or the
shift position will switch to the N (Neutral)
position.

For additional information, see “Driving the
vehicle” (P. 5-14).

Key reminder chime

A chime will sound if the driver's side door is
opened while the power switch is pushed
to the ON or ACC position.

Make sure that the power switch is pushed
to the OFF position, and take the Intelligent
Key with you when leaving the vehicle.

Light reminder chime

The light reminder chime will sound when
the driver side door is opened with the light
switch in the

or

position, and

the power switch is in the ACC, OFF or LOCK
position.

Turn the light switch off when you leave the
vehicle.

Parking brake reminder chime

A chime sounds if the parking brake is set
and the vehicle is driven. The chime will
stop if the parking brake is released or the
vehicle speed returns to zero.

Power switch reminder chime

The power switch reminder chime will
sound when the driver's door is opened
while the power switch is in the ON or
READY to drive position. Push the power
switch to the OFF position.

12-volt battery charge
warning chime

If the 12-volt battery charge warning light
illuminates, the chime will sound when a
warning message is displayed in the ve-
hicle information display.

When the chime sounds, immediately stop
the vehicle in a safe location and push the P
(Park) position switch on the shift lever and
apply the parking brake. The 12-volt battery
charge warning light turns off and the
chime will stop when the parking brake is
applied or the vehicle is placed in the P
(Park) position. Have the system checked. It
is recommended that you visit a NISSAN
certified LEAF dealer for this service. For
additional information, see “12-volt battery
charge warning light” (P. 2-15).

Instruments and controls

2-25

-------------------------------------------------------------------------------------------------------------------------------------------------------------

The vehicle information display is located
to the left of the speedometer. It displays
items such as:
• Battery information
• Energy economy
• Average vehicle speed
• Driving distance
• Driving time
• Cruise control information
• Intelligent Key information
• Indicators and warnings

HOW TO USE THE VEHICLE
INFORMATION DISPLAY

The vehicle information display can be
changed by using the

,

,

,

,

and OK buttons located on the steer-

ing wheel.

O

1

OK

Use this button to change
or select items.

O

2

Use these buttons to navi-
gate the vehicle informa-
tion display.

O

3

Use this button to return to
the previous menu.

O

4

Use these buttons to navi-
gate the vehicle informa-
tion display.

The

OK

,

,

,

,

, and

but-

tons also control audio and control panel
functions

in

some

conditions.

Most

screens

and

menus

offer

instruction

prompts of the steering switches to indi-
cate how to control the vehicle information
display. White dots appear on the left side
of the vehicle information display when
there is more than one page of menu
items. The

OK

,

and

change the

audio source and the buttons also control
voice recognition manual mode. For addi-
tional information, refer to the separate
NissanConnect® Manual.

LIC3872

LHA4545

VEHICLE INFORMATION DISPLAY

2-26

Instruments and controls

-------------------------------------------------------------------------------------------------------------------------------------------------------------

STARTUP DISPLAY

With the vehicle in the ON position, the ve-
hicle information display may display the
following screens:
• Battery information
• Audio
• Navigation (if so equipped)
• Energy Economy
• Driving Aids
• Warnings
• Settings

Warnings will only display if there are any
present. For additional information, see
“Vehicle information display warnings and
indicators” (P. 2-34).

To control which items display in the ve-
hicle information display, see “How to use
the vehicle information display” (P. 2-26).

SETTINGS

The settings mode allows you to change
the information displayed in the vehicle in-
formation display as well as enable and
disable various vehicle features and sys-
tems. The settings include:
• VDC Setting
• Driver Assistance
• Customize Display
• Vehicle Settings
• EV Settings
• TPMS Settings
• Maintenance
• Clock
• Unit/Language
• Factory Reset

VDC Setting

The VDC setting menu allows the user to the adjust the VDC settings.

Some menu items shown below may not be equipped on your vehicle.

Menu Item

Explanation

System

Allows user to turn the Vehicle Dynamic Control (VDC) system on or off.

Instruments and controls

2-27

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Driver Assistance

The driver assistance menu allows the user to change the settings for driving, parking, and braking aids.

Some menu items shown below may not be equipped on your vehicle

Menu Item

Explanation

Steering Assist

Allows user to turn the steering assist feature on or off. For additional information, see “ProPILOT
Assist” (P. 5-92).

Lane

Displays the available lane options.

Lane Departure Warning

Allows user to turn the Lane Departure Warning on and off. For additional information, see “Lane
Departure Warning (LDW)” (P. 5-25).

Lane Departure Prevention

Allows user to turn the Intelligent Lane Intervention (I-LI) on and off. For additional information, see
“Intelligent Lane Intervention (I-LI)” (P. 5-30).

Blind Spot

Displays the available blind spot options.

Blind Spot Warning

Allows user to turn the Blind Spot Warning on and off. For additional information, see “Blind Spot
Warning (BSW)” (P. 5-36).

Blind Spot Intervention

Allows user to turn the Intelligent Blind Spot Intervention (I-BSI) on and off. For additional informa-
tion, see “Intelligent Blind Spot Intervention (I-BSI)” (P. 5-45).

Side Indicator Brightness

Allows user to set the brightness of the side indicator.

Emergency Brake

Displays the available emergency brake options.

Front

Allows user to turn the emergency brake on and off. For additional information, see “Automatic
Emergency Braking (AEB) with Pedestrian Detection” (P. 5-125) and “Intelligent Forward Collision
Warning (I-FCW)” (P. 5-141).

Rear

Allows user to turn the rear emergency braking system on and off. For additional information, see
"Rear Automatic Braking (RAB) (P. 5-136).

2-28

Instruments and controls

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Menu Item

Explanation

Parking Aids

Displays the available parking aids.

Sonar

Allows user to select sonar system features. For additional information, see “Rear Sonar System
(RSS) (P. 5-168).

Parking sonar

Allows user to turn the parking sonar on or off..

Display

Allows user to turn the parking sonar display on or off.

Volume

Allows user to change the volume of the parking aid chimes: High, Med. Low

Range

Allows user to select the range in which the parking sonar will activate: Far, Med, Near.

Moving Object

Allows user to turn the Moving Object Detection on and off. For additional information, see “Mov-
ing Object Detection (MOD)” (P. 4-23).

Cross Traffic

Allows user to turn the cross traffic alert on and off. For additional information, see “Rear Cross
Traffic Alert (RCTA)” (P. 5-58).

Driver Attention
Alert

Allows user to turn the driver attention alert on or off. For additional information, see “Intelligent
Driver Alertness (I-DA)” (P. 5-154).

Timer Alert

Allows user to set or reset an alert at a specific tune interval.

Low Temperature Alert

Allows user to turn the low temperature alert on or off.

Chassis Control

Displays the available chassis controls.

Active Trace Control (Intelligent Trace
Control)

Allows user to turn the chassis control on or off. For additional information, see “Chassis control”
(P. 5-166).

e-Pedal

Displays the available e-Pedal options.

Retain Mode

Allows user to turn the retain mode on or off. For additional information, see “e-Pedal
system”(P. 2-13).

Instruments and controls

2-29

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Customize Display

The customize display menu allows the user to change the settings for the vehicle information display.

Some menu items shown below may not be equipped on your vehicle.

Menu Item

Explanation

Main Menu Selection

Displays the available main menu selection options.

Cruise

Allows user to turn the Cruise screen on or off in the vehicle information display.

Driving Aids

Allows user to turn the safety shield screen on or off in the vehicle information display.

Status

Allows user to turn the status screen on or off in the vehicle information display.

Tire Pressures

Allows user to turn the tire pressures screen on or off in the vehicle information display.

Drive Computer

Allows user to turn the drive computer screen on or off in the vehicle information display.

Chassis Control

Allows user to turn the chassis control screen on or off in the vehicle information display.

ECO Info Settings

Displays the available ECO Info Settings.

ECO Drive Report

Allows user to turn the ECO drive report on or off.

View History

Allows user to view and reset the ECO drive report history.

Navigation Settings

Displays the available navigation settings.

Alerts

Allows user to turn the navigation alerts on or off.

Cruise Screen Transition

Allows user to turn the Cruise screen transition on or off.

Welcome Effect

Displays the available welcome effects.

Gauges

Allows user to turn the gauges effect on or off.

Animation

Allows user to turn the animation effect on or off.

2-30

Instruments and controls

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Vehicle Settings

The vehicle settings menu allows the user to change the settings for the lights, locks, wipers and other vehicle settings.

Some menu items shown below may not be equipped on your vehicle.

Menu Item

Explanation

Rear Door Alert

Displays the available Rear Door Alert options. For additional information, see “Rear Door Alert”
(P. 2-60).

Horn & Alert

When selected, the alert is displayed and horn sounds.

Alert Only

When selected, only the alert is displayed.

OFF

When selected, no alert or horn will be active.

Lighting

Displays the available lighting options.

Auto Room Lamp

Allows user to turn the auto room lamp on or off

Light Sensitivity

Allows user to change when the lights illuminate based on the brightness outside the vehicle.

Light Off Delay

Allows user to change the duration of time that the automatic headlights stay on after the vehicle
is shut off.

Locking

Displays the available locking options.

Ext. Door Switch

Allows user to turn the exterior door switch on or off. When turned on, the request switch on the
door is activated.

Selective Unlock

Allows user to turn selective unlock on or off. When turned on, only the current door is unlocked
after the door unlock operation. When the door handle request switch on the driver’s or front pas-
senger’s side door is pushed to be unlocked, only the corresponding door is unlocked first. All the
doors can be unlocked if the door unlock operation is performed again within 5 seconds. When
this item is turned off, all the doors will be unlocked after the door unlock operation is performed
once.

Wipers

Displays the available wiper settings. For additional information, see “Wiper and washer switch”
(P. 2-45).

Speed Dependent

Allows user to turn the speed dependent feature on or off.

Instruments and controls

2-31

-------------------------------------------------------------------------------------------------------------------------------------------------------------

EV Settings

The EV settings menu allows the user to change the settings for charging the vehicle.

Some menu items shown below may not be equipped on your vehicle.

Menu Item

Explanation

Chg. Connector Lock

Allows user to lock or unlock the charging connection.

Charge Timer1

Allows user to set charge timer 1.

Charge Timer2

Allows user to set charge timer 2.

Chg. Timer Only at HOME

Allows user to set charging timer only at home.

Charge Time Screen

Allows user to select the display time screen based on charge method.

Climate Ctrl. Timer1

Allows user to set climate control timer 1.

Climate Ctrl. Timer2

Allows user to set climate control timer 2.

TPMS Settings

The TPMS settings menu allows the user to change the tire pressure units displayed in the vehicle information display.

Some menu items shown below may not be equipped on your vehicle.

Menu Item

Explanation

Tire Pressure Unit

Allows user to select the tire pressure units that will display in the vehicle information display.

Maintenance

The maintenance menu allows the user to set reminders for various vehicle maintenance items.

Some menu items shown below may not be equipped on your vehicle.

Menu Item

Explanation

Maintenance

Displays available maintenance reminder options.

Tire

Allows user to set a reminder at a specific interval or reset the current one.

Other

Allows user to set a reminder at a specific interval or reset the current one.

2-32

Instruments and controls

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Clock

The clock menu allows the user to change the clock settings.

Some menu items below may not be equipped on your vehicle.

Menu Item

Explanation

Clock

Clock Mode

Allows user to select the clock setting mode.

Clock Format

Allows user to select from 12–hour and 24–hour formats.

Daylight Saving Time

Allows user to turn daylight saving time mode on or off.

Time Zone

Allows user to set a time zone.

Set Clock Manually

Allows user to set a clock manually.

Unit/Language

The unit/language menu allows the user to change the units shown in the vehicle information display.

Some menu items shown below may not be equipped on your vehicle.

Menu Item

Explanation

Mileage/Energy

Allows user to select the preferred mileage/energy unit of measure to display.

Tire Pressures

Allows user to select the preferred tire pressure unit of measure to display.

Temperature

Allows user to select the preferred temperature unit of measure to display.

Language

Allows user to select the preferred language to display.

Factory Reset

The factory reset menu allows the user to restore the vehicle information display settings to factory status.

Some menu items shown below may not be equipped on your vehicle.

Menu Item

Explanation

Factory Reset

Allows user to reset the vehicle information display settings to the original factory settings. Once
selected, the user can confirm or cancel the reset.

Instruments and controls

2-33

-------------------------------------------------------------------------------------------------------------------------------------------------------------

VEHICLE INFORMATION DISPLAY
WARNINGS AND INDICATORS

Some of the following warning messages
may not be equipped on your vehicle.

EV system operation for
discharged Intelligent Key
system indicator

This indicator appears when the Intelligent
Key battery is running out of power and
when the Intelligent Key system and ve-
hicle are not communicating normally.

If this indicator appears, touch the power
switch with the Intelligent Key while de-
pressing the brake pedal. For additional in-
formation, see “NISSAN Intelligent Key® bat-
tery discharge” (P. 5-12).

Key Battery Low

This indicator appears when the Intelligent
Key battery is running out of power.

If this indicator appears, replace the bat-
tery with a new one. For additional infor-
mation, see “NISSAN Intelligent Key® bat-
tery replacement” (P. 8-19).

Key System Error: See
Owner’s Manual

After the power switch is placed in the ON
position, this warning appears for a period
of time and then turns off.

The Key System Error message warns of a
malfunction with the Intelligent Key sys-
tem. If the warning appears while the mo-
tor is stopped, it may be impossible to start
the motor.

If the warning appears while the motor is
running, you can drive the vehicle. However,
have it repaired as soon as possible. It is
recommended that you visit a NISSAN cer-
tified LEAF dealer for this service.

No Key Detected

This warning appears in either of the fol-
lowing conditions:

No key inside the vehicle:

This warning appears when the door is
closed with the Intelligent Key left outside
the vehicle and the power switch in the
ACC or ON position. Make sure that the
Intelligent Key is inside the vehicle.

Unregistered Intelligent Key:

This warning appears when the power
switch is placed in the ON, ACC or READY to
drive position and the Intelligent Key can-
not be recognized by the system. You can-
not place the power switch in the READY to
drive position with an unregistered key. Use
an Intelligent Key that has been registered.

For additional information, see “NISSAN In-
telligent Key® system” (P. 3-6).

Brightness indicator

This indicator shows the brightness ad-
justment of the instrument panel. For addi-
tional information, see “Instrument bright-
ness control” (P. 2-54).

Chassis Control System Error: See
Owner’s Manual

This warning appears if the chassis control
is not functioning properly. Have the sys-
tem checked. It is recommended that you
visit a NISSAN certified LEAF dealer for this
service. For additional information, see
“Chassis control” (P. 5-166).

2-34

Instruments and controls

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Check position of shift lever

This warning appears if the system cannot
detect the shift position. Make sure the ve-
hicle is placed in a position properly.

The master warning light (yellow) also illu-
minates and the chime sounds. Check the
shift position of the vehicle.

Check Rear Seat For All Articles

When the system is enabled, this message
appears when the vehicle comes to a com-
plete stop, the vehicle is transitioned from
the D (Drive) position to P (Park) position,
and the driver exits the vehicle. This mes-
sage alerts the driver, after a period of time,
to check for items in the rear seat after the
audible alert has been provided.

NOTE:
This system is disabled until a driver
enables it using the vehicle informa-
tion display. For additional informa-
tion, see “How to use the vehicle in-
formation display” (P. 2-26).

For additional information, see “Rear Door
Alert” (P. 2-60).

Rear Door Alert is activated

When the system is enabled, this message
appears when the Rear Door Alert system
is active and can remind the driver to check
the back seat.
• Using the steering wheel switch, a driver

can select “Dismiss Message” to clear the
display for a period of time. If no selection
is made, this message automatically
turns off after a period of time.

• Using the steering wheel switch, a driver

can select “Disable Alert” to disable the
horn alert for the remainder of the cur-
rent trip.

WARNING

Selecting “Dismiss Message” during a
stop within a trip temporarily dis-
misses the message for that stop with-
out turning the system off. Alerts can
be provided for other stops during the
trip. Selecting “Disable Alert” turns off
the Rear Door Alert system for the re-
mainder of a trip and no audible alert
will be provided.

NOTE:

This system is disabled until a driver en-
ables it using the vehicle information
display. For additional information, see
“How to use the vehicle information dis-
play” (P. 2-26).

For additional information, see “Rear Door
Alert” (P. 2-60).

Door open

This warning appears if any of the doors
and/or the rear hatch are open or not
closed securely. The vehicle icon indicates
which door or the rear hatch is open on the
display. Make sure that all of the doors and
the rear hatch are closed.

This warning also appears alternating with
the Shift to P range warning while the driv-
er's door is opened with the shift position in
any position other than the P (Park) posi-
tion. For additional information, see “Shift to
P range” (P. 2-37).

Driver alert

This warning appears when the previously
set time for a break is reached. You can set
the time for up to 6 hours in the setting
menu. For additional information, see “Ve-
hicle information display” (P. 2-26).

Instruments and controls

2-35

-------------------------------------------------------------------------------------------------------------------------------------------------------------

e—Pedal system failure! Press brake
pedal to slow or stop

This warning appears when the e-Pedal
system is malfunctioning. Have the system
checked. It is recommended that you visit a
NISSAN certified LEAF dealer for this
service.

Indicators for maintenance

These indicators appear when the cus-
tomer set distance comes for replacing
tires or other maintenance items. You can
set or reset the distance for replacing tires
and other maintenance items.

WARNING

The tire replacement indicator is not a
substitute for regular tire checks, in-
cluding tire pressure checks. For addi-
tional

information,

see

“Changing

wheels and tires” (P. 8-34). Many factors
including tire inflation, alignment, driv-
ing habits and road conditions affect
tire wear and when tires should be re-
placed. Setting the tire replacement in-
dicator for a certain driving distance
does not mean your tires will last that
long. Use the tire replacement indicator
as a guide only and always perform

regular tire checks. Failure to perform
regular tire checks, including tire pres-
sure checks could result in tire failure.
Serious vehicle damage could occur
and may lead to a collision, which could
result in serious personal injury or
death.

For scheduled maintenance items and in-
tervals, see “Maintenance and schedules.”

Headlight System Error: See Owner’s
Manual

This warning appears when the LED head-
lights are not functioning properly.

If this warning appears, have your system
checked. It is recommended that you visit a
NISSAN certified LEAF dealer for this
service.

Low battery charge
indicator

This light appears when the available Li-ion
battery charge is getting low. Charge as
soon as it is possible, preferably before the
Li-ion battery available charge gauge
reaches 0%.

NOTE:

The low battery charge indicator turns
off immediately before the Li-ion battery
is completely discharged and the vehicle
will stop. If the Li-ion battery becomes
completely discharged, the vehicle must
be charged in order to be driven.

Low outside air
temperature

The outside air temperature is displayed in
°F or °C in the range of −20°F to 140°F (−30°C
to 60°C).

The outside air temperature mode in-
cludes a low temperature warning feature.
If the outside air temperature is below 37°F
(3°C), the warning is displayed on the
screen.

The outside temperature sensor is located
in front side of the vehicle. The sensor may
be affected by road, wind directions and
other driving conditions. The display may
differ from the actual outside temperature
or the temperature displayed on various
signs or billboards.

2-36

Instruments and controls

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Low Washer Fluid

This warning appears when the washer
tank fluid is at a low level. Add washer fluid
as necessary. For additional information,
see “Windshield-washer fluid” (P. 8-8).

Press Brake Pedal

This message may appear in the following
situations:
• The driver tries to release the electronic

parking brake manually without depress-
ing the brake pedal.

• The vehicle is stopped on a steep hill; and

there is a possibility of moving back-
wards, even if the electronic parking
brake is applied.

For additional information, see “Electronic
parking brake” (P. 5-19).

Press brake pedal to
operate e-Pedal switch

This indicator appears when trying to turn
the e-Pedal off without depressing the
brake pedal when the vehicle is stopped.
Depress the brake pedal before pulling the
e-Pedal switch.

Push brake and power
switch to drive

This indicator appears while the vehicle is
in the P (Park) position. This indicator
means that the EV system will start when
the power switch is pressed with the brake
pedal depressed.

Rear seat belt reminder

This warning appears for 65 seconds after
the power switch is placed in the ON posi-
tion and the EV system is started.

This warning shows the status of the rear
seat belts. When one of the rear seat belts is
buckled, the corresponding rear seat belt
warning will appear in gray. When one of
the rear seat belts is unbuckled, the rear
seat belt warning will appear red.

After a change in buckle status, a chime will
sound and the warning will appear for an-
other 65 seconds.

Release Parking Brake

This warning appears when the vehicle
speed is above 4 mph (7 km/h) (models not
equipped with electronic parking brake) or
2 mph (4 km/h) (models equipped with
electronic parking brake) and the parking
brake is applied. Stop the vehicle and re-
lease the parking brake.

Reminder Turn OFF
Headlights

This warning appears when the power
switch is turned to the OFF position but the
headlight switch is still on. Turn off the
headlight switch.

Shift to P range

This warning appears alternately with
door/rear hatch open warning when the
driver's door is opened with the shift posi-
tion in any position other than the P (Park)
position. If this warning appears, push the P
(Park) position switch and place in the P
(Park) position.

For additional information, see “Door open”
(P. 2-35).

Shipping Mode On Push Storage Fuse

This warning may appear if the extended
storage switch is not pushed in. When this
warning appears, push in the extended
storage switch to turn off the warning.

For additional information, see “Extended
storage switch” (P. 8-19).

Instruments and controls

2-37

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Tire Pressure Low - Add Air

This warning appears when the low tire
pressure warning light in the meter illumi-
nates and low tire pressure is detected. The
warning appears each time the power
switch is placed in the ON position as long
as the low tire pressure warning light re-
mains illuminated.

If this warning appears, stop the vehicle
and adjust the tire pressure to the recom-
mended COLD tire pressure shown on the
Tire and Loading Information label. For ad-
ditional information, see “Low tire pressure
warning light” (P. 2-20) and “Tire Pressure
Monitoring System (TPMS)” (P. 5-4).

T/M system malfunction Visit dealer

This warning appears if there is a malfunc-
tion in the electric shift control system but
operation of the electric shift control is still
possible. The master warning light (yellow)
also illuminates and the chime sounds.
When this occurs, check the shift position
indicator by the shift lever or in the vehicle
information display to make sure that
shifting has been performed properly. It is
recommended that you contact a NISSAN
certified LEAF dealer as soon as possible.

When Parked Apply Parking
Brake

This warning appears if there is a malfunc-
tion in the electric shift control system. This
warning appears when the parking brake
is not applied, even after the vehicle has
been parked. The master warning light
(red) also illuminates and the chime
sounds.

If the power switch cannot be placed in the
OFF position, apply the parking brake and
then place the power switch in the OFF
position. The warning turns off and the
chime stops.

If this warning appears, have your system
checked. It is recommended that you visit a
NISSAN certified LEAF dealer for this service.

Automatic Emergency
Braking with Pedestrian
Detection warning
indicator

This indicator appears along, with an au-
dible warning, when the system detects
the possibility of a forward collision.

For additional information, see “Automatic
Emergency Braking (AEB) with Pedestrian
Detection” (P. 5-125) and “Intelligent Forward
Collision Warning (I-FCW)” (P. 5-141).

Blind Spot Warning (BSW)
indicator

This indicator appears when the BSW/I-BSI
systems are engaged.

For additional information, see “Blind Spot
Warning (BSW)” (P. 5-36) or “Intelligent Blind
Spot Intervention (I-BSI)” (P. 5-45).

Cruise control indicator

This indicator shows the cruise control sys-
tem status.

When cruise control is activated, a green
circle will appear to indicate it is set. The
vehicle information display will also display
the speed the cruise control was set at. If
you accelerate past the set speed, the
speed will blink until you either cancel
cruise control or go back to the set speed. If
cruise control is on and canceled, the
speed will be displayed to show the speed
the vehicle will return to if the resume but-
ton is activated.

For additional information, see “Cruise con-
trol” (P. 5-65).

2-38

Instruments and controls

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Currently not available

This message may appear when the Intel-
ligent Cruise Control (ICC) (with ProPILOT
Assist) system, Intelligent Blind Spot Inter-
vention (I-BSI), Intelligent Lane Intervention
(I-LI) or the ICC system is engaged.

Under the following condition, the ICC (with
ProPILOT Assist) system, Intelligent Blind
Spot Intervention (I-BSI), Intelligent Lane In-
tervention (I-LI) or the ICC system is auto-
matically canceled:
• When the VDC system is turned off.

The above system cannot be used in some
situations (VDC operates, wheel slip, and
VDC system is off.)

Driver Attention Alert
System Fault

This warning appears when the Intelligent
Driver Alertness (I-DA) system is not func-
tioning properly.

For additional information, see “Intelligent
Driver Alertness (I-DA)” (P. 5-154).

Driver Attention Alert Take
a Break?

This alert appears when the system has
detected the driver may be displaying fa-
tigue or a lack of attention.

Forward Driving Aids Temporarily
Disabled. Front Sensor Blocked. See
Owner’s Manual

This message appears when the front ra-
dar sensor may be obstructed due to:
• mud, dirt, snow, ice, etc.
• inclement weather (rain, fog, snow, etc.)

All forward driving aids are temporarily dis-
abled until the system detects that the
front radar sensor is no longer obstructed.

For additional information, see the follow-
ing (if so equipped):
• Automatic Emergency Braking (AEB) with

Pedestrian Detection (P. 5-125)

• Intelligent Cruise Control (ICC) (P. 5-67),

(P. 5-103)

• Intelligent Forward Collision Warning (I-FCW)

(P. 5-141)

Lane Departure Warning
(LDW) indicator

This indicator appears when the LDW sys-
tem is engaged.

For additional information, see “Lane De-
parture Warning (LDW) system” (P. 5-25).

Intelligent Cruise Control
(ICC) indicators

This indicator shows the Intelligent Cruise
Control (ICC) system status. The status is
shown by the color. For additional informa-
tion, see “Intelligent Cruise Control (ICC)”
(P. 5-67).

Malfunction: See Owner’s Manual

This warning appears when one or more of
the following systems (if so equipped) is
not functioning properly:
• Lane Departure Warning (LDW)
• Intelligent Lane Intervention (I-LI)
• Automatic Emergency Braking (AEB) with

Pedestrian Detection

• Intelligent

Forward

Collision

Warning

(I-FCW)

• Rear Automatic Braking (RAB)
• Rear Cross Traffic Alert (RCTA)

If one or more of these warning appears,
have the system checked. It is recom-
mended that you visit a NISSAN certified
LEAF dealer for this service.

Instruments and controls

2-39

-------------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

 

 

 

 

 

Content      ..     11      12      13      14     ..