|
|
the side and center ventilators and to the front and rear floor outlets. button. (The indicator light will turn off.) 2. Push the button. (The indicator light will turn on.) 3. Turn the fan speed control dial to the desired position. 4. Turn the temperature control dial to the desired position. Heating and defogging: This mode heats the interior and defogs the windows. button. (The indicator light will turn on.) 2. Turn the fan speed control dial to the desired position. 3. Turn the temperature control dial to the maximum hot (right) position. When the button is pushed, the air conditioner automatically turns on if the outside temperature is more than 36°F (2°C). This dehumidifies the air which helps defog the windshield. The air re- circulation indicator automatically turns off, allowing outside air to be drawn into the passenger compartment to further improve the defogging performance. NOTE: blades and air inlet in front of the windshield. This improves heater op- eration. Air conditioner operation Start the engine, turn the fan speed control dial to the desired position, and push the A/C button to activate the air conditioner. When the air conditioner is on, cooling and dehumidifying func- tions are added to the heater operation. The air conditioner cooling function op- erates only when the engine is running. Cooling: This mode is used to cool and dehumidify the air. button. (The indicator light will turn on.) 2. Turn the fan speed control dial to the desired position. 3. Push the A/C button. (The indicator light will turn on.) 4. Turn the temperature control dial to the desired position between the middle and the cool (left) position. For quick cooling, push the MAX A/C button. When the MAX A/C button is pushed, it will activate the air recirculation mode. The amount of air coming through the ventilators is the highest it can go when in MAX A/C mode regardless of the position of the fan speed control dial. Dehumidified heating: This mode is used to heat and dehumidify the air. button. (The indicator light will turn off.) 2. Push the button. (The indicator light will turn on.) 3. Turn the fan speed control dial to the desired position. 4. Push the A/C button on. (The indicator light will turn on.) 5. Turn the temperature control dial to the desired position between the middle and the hot (right) position. Dehumidified defogging: This mode is used to defog the windows and dehumidify the air. button. (The indicator light will turn on.) 2. Turn the fan speed control dial to the desired position. 3. Turn the temperature control dial to the desired position. When the front defroster or mode is selected, the air conditioner automatically turns on if the outside temperature is Monitor, heater, air conditioner, audio and phone systems 4-29 |