Nissan Titan (2022 year). Manual in english

Menu item

Explanation

Wipers

Displays available wiper options.

Speed Dependent

Allows user to turn the speed dependent feature on or off. For additional information, see “Wiper and washer
switch” (P. 2-41).

Rain Sensor

Allows user to turn the rain sensor feature on or off. For additional information, see “Wiper and washer
switch” (P. 2-41).

Headlamp On

Displays available headlamp on options.

Off

Headlights do not activate automatically when the wipers are activated.

Wiper Low & High

Headlights activate when the wiper stalk is set to either low or high mode.

Wiper INT, Low & High

Headlights activate when the wiper stalk is set to intermittent, low, or high mode.

Memory Seat (ADP)

Displays available memory seat options.

Exit Seat Slide

Allows the user to turn the exit seat slide on or off. When turned on, this feature will move the driver’s seat
backward for an easy exit when the ignition is turned off and the driver’s door is opened. After getting into
the vehicle and placing the ignition switch in the ACC position, the driver’s seat will move to the previous set
position. For additional information, see “Memory Seat” (P. 3-38).

Exit Steering Up

Allows the user to turn the exit steering up feature on or off. When turned on, this feature will move the
steering wheel upward for an easy exit when the ignition is turned off and the driver’s door is opened.
After getting into the vehicle and placing the ignition switch in the ACC position, the steering wheel moves to
the previous position. For additional information, see “Memory Seat” (P. 3-38).

Reverse Tilt Mirror

Displays reverse tilt mirror information.

2-28

Instruments and controls

Towing Settings

The towing settings menu allows the user to access the trailer light check.

Menu item

Explanation

Trailer light check

Allows user to select a mode in which the vehicle will test various lights that could affect a trailer if connected
properly. This feature can also be activated using the NISSAN Intelligent Key®. For additional information, see
“NISSAN Intelligent Key®” (P. 3-9) and “Towing a trailer” (P. 10-32).

Alerts

The alarm menu allows the user to set specific alarms for various items on the vehicle.

Some menu items shown below may not be equipped on your vehicle.

Menu item

Explanation

Timer Alert

Allows user to set the timer alert alarm.

Navigation

Allows user to turn the navigation alarm on or off.

Phone

Allows user to turn the phone alarm on or off.

Mail

Allows user to turn the mail alarm on or off.

Instruments and controls

2-29

Maintenance

The maintenance menu allows the user to set reminders for various vehicle maintenance items.

Some menu items shown below may not be equipped on your vehicle.

WARNING

The tire replacement indicator is not a substitute for regular tire checks, including tire pressure checks. For additional informa-
tion, see “Changing wheels and tires” (P. 8-43). Many factors including tire inflation, alignment, driving habits and road conditions
affect tire wear and when tires should be replaced. Setting the tire replacement indicator for a certain driving distance does not
mean your tires will last that long. Use the tire replacement indicator as a guide only and always perform regular tire checks.
Failure to perform regular tire checks, including tire pressure checks could result in tire failure. Serious vehicle damage could
occur and may lead to a collision, which could result in serious personal injury or death.

Menu item

Explanation

Maintenance

Allows user to cycle through various maintenance items and set reminders to perform maintenance
at specific intervals.

Oil and Filter

Allows user to set an oil and filter reminder at a specific interval or reset the current one.

Air Filter

Allows user to set an air filter reminder at a specific interval or reset the current one.

Tire

Allows user to set a tire reminder at a specific interval or reset the current one.

Brake Pad

Allows user to set a brake pad reminder at a specific interval or reset the current one.

Brake Fluid

Allows user to set a brake fluid reminder at a specific interval or reset the current one.

Battery

Allows user to set a battery reminder at a specific interval or reset the current one.

Transmission Fluid

Allows user to set a transmission fluid reminder at a specific interval or reset the current one.

Engine Coolant

Allows user to set an engine coolant reminder at a specific interval or reset the current one.

Spark Plug

Allows user to set a spark plug reminder at a specific interval or reset the current one.

Other

Allows user to set a reminder, other than for the maintenance items listed above, at a specific interval or
reset the current one.

2-30

Instruments and controls

Unit

The unit menu allows the user to change the units shown in the vehicle information display.

Menu item

Explanation

Mileage

Displays available mileage display units.

Pressure

Displays available pressure display units.

Temperature

Displays available temperature display units.

Language

The language menu allows the user to change the languages displayed in the vehicle information display.

Menu item

Explanation

Language

Displays available language options for the vehicle information display.

Factory Reset

The factory reset menu allows the user to restore the vehicle information display settings to factory status.

Menu item

Explanation

Factory Reset

Allows user to reset the vehicle information display settings to the original factory settings.
Once selected, the user can confirm or deny the reset.

Instruments and controls

2-31

VEHICLE INFORMATION DISPLAY
WARNINGS AND INDICATORS

The following messages may appear in
your vehicle information display.

Engine start operation for
Intelligent Key system (if
I-Key battery level is low)

This indicator appears when the battery of
the Intelligent Key is low and when the In-
telligent Key system and the vehicle are not
communicating normally.

If this appears, touch the ignition switch
with the Intelligent Key while depressing
the brake pedal. For additional information,
see “NISSAN Intelligent Key® battery dis-
charge” (P. 5-15).

Key Battery Low

This indicator appears when the Intelligent
Key battery is running out of power.

If this indicator appears, replace the bat-
tery with a new one. For additional infor-
mation, see “Battery replacement” (P. 8-27).

Key ID Incorrect

This warning appears when the ignition
switch is placed from the OFF position and
the Intelligent Key is not recognized by the
system. You cannot start the engine with
an unregistered key.

For additional information, see “NISSAN In-
telligent Key®” (P. 3-9).

Key System Error: See
Owner’s Manual

After the ignition switch is placed in the ON
position, this warning appears for a period
of time and then turns off.

The Key System Error message warns of a
malfunction with the Intelligent Key sys-
tem. If the warning appears while the en-
gine is stopped, it may be impossible to
start the engine.

If the warning appears while the engine is
running, you can drive the vehicle. However,
in these cases, have the system checked. It
is recommended that you visit a NISSAN
dealer for this service.

No Key Detected

This warning appears when the Intelligent
Key is left outside the vehicle with the igni-
tion switch in the ON position. Make sure
the Intelligent Key is inside the vehicle.

For additional information, see “NISSAN In-
telligent Key®” (P. 3-9).

Battery Voltage Low Charge battery

This warning appears when the battery is
low and needs to be charged.

Brightness indicator

This indicator appears when the vehicle
information display screen brightness is
being adjusted.

Door Open

This warning appears when a door has
been opened.

Flat Tire

This warning appears when the low tire
pressure warning light in the meter illumi-
nates and one or more flat tires are de-
tected while driving.

2-32

Instruments and controls

FRT & RR tire size difference: See
Owner’s Manual

This warning may appear if there is a large
difference between the diameters of the
front and rear wheels. Pull off the road in a
safe area, with the engine idling. Check that
all the tire sizes are the same, that the tire
pressure is correct and that the tires are
not excessively worn. For additional infor-
mation, see “Wheels and tires” (P. 8-33).

Loose Fuel Cap

This warning appears when the fuel-filler
cap is not tightened correctly after the ve-
hicle has been refueled. For additional in-
formation, see “Fuel-filler door” (P. 3-23).

Headlight System Error: See Owner’s
Manual

This warning appears when the LED head-
lights are not functioning properly.

If this warning appears, have your system
checked. It is recommended that you visit a
NISSAN dealer for this service.

Low Fuel

This warning appears when the fuel level in
the fuel tank is getting low. Refuel as soon
as it is convenient, preferably before the
fuel gauge reaches 0 (Empty).

There will be

a small reserve of fuel in the tank when
the fuel gauge needle reaches 0 (Empty).

Low Tire Pressure Error —
Info

This warning appears when the low tire
pressure warning light in the meter illumi-
nates and low tire pressure is detected.
Press the ENTER button for information
about the low tire pressure. For additional
information, see “Low tire pressure warning
light” (P. 2-18) and “Tire Pressure Monitoring
System (TPMS)” (P. 5-5).

Low Washer Fluid

This

warning

appears

when

the

windshield-washer fluid is at a low level.
Add windshield-washer fluid as necessary.
For

additional

information,

see

“Windshield-washer fluid” (P. 8-15).

Maintenance indicators

When engine oil service is due, one or more
of these icons will appear automatically to
remind you. For additional information, see
“Engine oil” (P. 8-7).

These will also appear when the user-set
reminders are met. For additional informa-
tion, see

“Vehicle

information

display”

(P. 8-7).

Power turned off to save the battery

This warning appears after the ignition
switch is automatically turned off to save
the battery.

Power will turn off to save the battery

This message appears in the vehicle infor-
mation display after a period of time if the
ignition switch is in the ACC or the ON po-
sition and if the vehicle is in P (Park). For
additional information, see “Push-button
ignition switch positions” (P. 5-14).

Push brake and start
switch to drive

This indicator appears when the shift lever
is in the P (Park) position.

Instruments and controls

2-33

This indicator means that the engine will
start by pushing the ignition switch with
the brake pedal depressed. You can start
the engine from any position of the ignition
switch.

Range XX miles

This warning appears to indicate the ap-
proximate distance remaining before the
fuel reaches 0 (Empty).

Check Rear Seat For All Articles

When the system is enabled, this message
appears when the vehicle comes to a com-
plete stop, the vehicle is transitioned from
the D (Drive) position to P (Park) position,
and the driver exits the vehicle. This mes-
sage alerts the driver, after a period of time,
to check for items in the rear seat after the
audible alert has been provided.

NOTE:

This system is disabled until a driver en-
ables it using the vehicle information
display. For additional information, see
“How to use the vehicle information dis-
play” (P. 2-23).

For additional information, see “Rear Door
Alert” (P. 2-64).

Rear Door Alert is activated

When the system is enabled, this message
appears when the Rear Door Alert system
is active and can remind the driver to check
the back seat.
• Using the steering wheel switch, a driver

can select “Dismiss Message” to clear the
display for a period of time. If no selection
is made, this message automatically
turns off after a period of time.

• Using the steering wheel switch, a driver

can select “Disable Alert” to disable the
horn alert for the remainder of the cur-
rent trip.

WARNING

Selecting “Dismiss Message” during a
stop within a trip temporarily dis-
misses the message for that stop with-
out turning the system off. Alerts can
be provided for other stops during the
trip. Selecting “Disable Alert” turns off
the Rear Door Alert system for the re-
mainder of a trip and no audible alert
will be provided.

NOTE:

This system is disabled until a driver en-
ables it using the vehicle information
display. For additional information, “How
to use the vehicle information display”
(P. 2-23).

For additional information, “Rear Door Alert”
(P. 2-64).

Rear seat belt reminder

This rear seat belt reminder appears after
starting the engine.

If any of the rear passenger seat belts are
not fastened, the seat belt icon illuminates
in red to show which seat belt is not fas-
tened. When a rear passenger’s seat belt
has been securely fastened, the color of the
corresponding seat belt icon will change.
The warning will automatically turn off af-
ter approximately 35 seconds.

A chime will sound one time and the rear
seat belt warning will appear if a rear pas-
senger’s seat belt is unfastened. The chime
will not sound when the vehicle speed ex-
ceeds 10 mph (15km/h). The seat belt icon
illuminates in red until the corresponding
rear passenger’s seat belt is fastened. The
warning will automatically turn off after ap-
proximately 35 seconds.

2-34

Instruments and controls

Release Parking Brake

This warning appears in the message area
of the vehicle information display when the
parking brake is set and the vehicle is
driven. Press the brake pedal to release the
parking brake.

Reminder: Turn OFF
Headlights

This warning appears when the headlights
are left in the ON position when exiting the
vehicle. Place the headlight switch in the
OFF or AUTO position. For additional infor-
mation, see “Headlight control switch”
(P. 2-45).

Remote Engine Start Mode

This warning appears in the vehicle infor-
mation display when the vehicle has been
started using the remote start function. To
start the vehicle, apply the brake and place
the ignition switch in the ON position.

Shift to Park

This warning appears when the ignition
switch is in the ACC or OFF position and the
shift lever is not in the P (Park) position. Also,
a chime sounds when the ignition switch is
in the ACC or OFF position.

If this warning appears, move the shift lever
to the P (Park) position and start the engine.

Shipping Mode On Push Storage Fuse

This warning may appear if the extended
storage switch is not pushed in. When this
warning appears, push in the extended
storage switch to turn off the warning. For
additional information, see “Extended stor-
age switch” (P. 2-69).

Tire Pressure Low - Add Air

This warning appears when the low tire
pressure warning light in the meter illumi-
nates and low tire pressure is detected. The
warning appears each time the ignition
switch is placed in the ON position as long
as the low tire pressure warning light re-
mains illuminated. If this warning appears,
stop the vehicle and adjust the tire pres-
sures of all four tires to the recommended
COLD tire pressure shown on the Tire and
Loading Information label. For additional
information, see “Low tire pressure warning
light” (P. 2-18) and “Tire Pressure Monitoring
System (TPMS)” (P. 5-5).

TPMS Error: See Owner’s Manual

This warning appears when there is an er-
ror with your TPMS. If this warning appears,
have the system checked. It is recom-
mended that you visit a NISSAN dealer for
this service.

When parked apply parking
brake

This message appears when a malfunc-
tion occurs in the electric shift control sys-
tem below 3 mph (5 km/h).

Have the system checked. It is recom-
mended that you visit a NISSAN dealer for
this service.

4WD Error: See Owner’s
Manual

This warning appears when the 4-wheel
drive system is not functioning properly
while the engine is running.

Tire Size Incorrect: See
Owner’s Manual

This warning appears when the 4-wheel
drive system is not functioning properly
while the engine is running.

Instruments and controls

2-35

4WD shift indicators

These indicators show which 4WD mode is
selected. For additional information, see
“Using 4–wheel drive (4WD)” (P. 5-107).

4WD MODE SHIFTING

This message appears when the vehicle is
shifting into 4WD. For additional informa-
tion, see “Using 4–wheel drive (4WD)”
(P. 5-107).

AT (Automatic
Transmission) CHECK

If the service warning appears while the
engine is running, or while driving, it may
indicate that the AT is not functioning prop-
erly and may need servicing. Have the sys-
tem checked, and if necessary, repaired
promptly. It is recommended that you visit
a NISSAN dealer for this service.

AT (Automatic Transmission) Error:
See Owner’s Manual

If this message appears while the engine is
running, or while driving, it may indicate
that the AT is not functioning properly and
may need servicing. Have the system
checked,

and

necessary,

repaired

promptly. It is recommended that you visit
a NISSAN dealer for this service.

Service AT

This transmission has a high fluid tem-
perature protection mode. If the fluid tem-
perature becomes too high (for example,
climbing steep grades in high tempera-
tures with heavy loads, such as when tow-
ing a trailer), engine power and, under
some conditions, vehicle speed will be de-
creased

automatically

reduce

the

chance of transmission damage. Vehicle
speed can be controlled with the accelera-
tor pedal, but the engine and vehicle speed
may be reduced.

WARNING

When the high fluid temperature pro-
tection mode operation occurs, vehicle
speed may be gradually reduced. The
reduced speed may be lower than
other traffic, which could increase the
chance of a collision. Be especially
careful when driving. If necessary, pull
to the side of the road at a safe place
and allow the transmission to return to
normal operation; or have it repaired if
necessary.

Automatic Emergency
Braking (AEB) with
Pedestrian Detection
emergency warning
indicator

This indicator appears along, with an au-
dible warning, when the system detects
the possibility of a forward collision.

For additional information, see “Automatic
Emergency Braking (AEB) with Pedestrian
Detection” (P. 5-80).

Blind Spot Warning (BSW)/
Rear Cross Traffic Alert
(RCTA) indicator

This indicator appears when the BSW and
RCTA systems are engaged.

For additional information, see “Blind Spot
Warning (BSW)” (P. 5-32) and “Rear Cross
Traffic Alert (RCTA)” (P. 5-42).

Cruise control indicator

This indicator shows the cruise control sys-
tem status.

For additional information, see “Cruise con-
trol” (P. 5-49).

2-36

Instruments and controls

Currently unavailable

This message may appear when the Intel-
ligent Cruise Control (ICC) system is en-
gaged. Under the following conditions, the
ICC system is automatically cancelled:
• When the VDC operates.
• When a wheel slips.
• When the VDC system is turned off.

The above system cannot be used in some
situations (VDC operates, wheel slips, and
VDC system is off).

Driver Attention Alert —
Malfunction

This warning appears when the Intelligent
Driver Alertness system is not functioning
properly. For additional information, see “In-
telligent Driver Alertness (I-DA)” (P. 5-102).

Driver Attention Alert —
Take a Break?

This alert appears when the system has
detected that the driver may be displaying
fatigue or a lack of attention.

Forward Driving Aids Temporarily
Disabled Front Sensor Blocked See
Owner’s Manual

This message appears when the front ra-
dar sensor may be obstructed due to:
• mud, dirt, snow, ice, etc.
• inclement weather (rain, fog, snow, etc.)

All forward driving aids are temporarily dis-
abled until the system detects that the
front radar sensor is no longer obstructed.

For additional information, see:
• Automatic Emergency Braking (AEB) with

Pedestrian Detection (P. 5-80)

• Intelligent Cruise Control (ICC) (P. 5-51)
• Intelligent Forward Collision Warning (I-

FCW) (P. 5-90)

Intelligent Cruise Control
(ICC) indicators

These

indicators

show

the

Intelligent

Cruise Control (ICC) system status. The sta-
tus is shown by color. For additional infor-
mation, see “Intelligent Cruise Control (ICC)”
(P. 5-51).

Lane Departure Warning
(LDW) indicator

This indicator appears when the LDW sys-
tem is engaged.

For additional information, see “Lane De-
parture Warning (LDW)” (P. 5-27).

Malfunction

This warning appears when one or more of
the following systems (if so equipped) is
not functioning properly:
• Blind Spot Warning (BSW)
• Intelligent Cruise Control (ICC)
• Lane Departure Warning (LDW)
• Rear Cross Traffic Alert (RCTA)

If one or more of these warning appears,
have the system checked. It is recom-
mended that you visit a NISSAN dealer for
this service.

Not Available High Camera Temp

This message appears when the camera
detects an interior temperature of more
than approximately 40°C (104°F).

For additional information, see “Automatic
Emergency Braking (AEB) with Pedestrian
Detection”

(P.

5-80),

“Lane

Departure

Warning (LDW)” (P. 5-27).

Instruments and controls

2-37

Parking Sensor

This indicator appears when the sensor is
activated. For additional information, see
“Front and rear sonar system” (P. 5-124).

Parking Sensor Error: See
Owner’s Manual

This warning appears when there is an er-
ror with the system. For additional informa-
tion, see “Front and rear sonar system”
(P. 5-124).

Rear Automatic Braking
(RAB) indicator

This indicator appears to indicate the sta-
tus of the Rear Automatic Braking (RAB)
system. For additional information, see
“Rear Automatic Braking (RAB)” (P. 5-75).

Speed Limit Sign indicator

This message may appear when the Traffic
Sign Recognition system is engaged.

For additional information, see “Traffic Sign
Recognition (TSR)” (P. 5-24).

System fault See Owner’s Manual

This warning appears if there is a malfunc-
tion in one of the following systems:
• Automatic Emergency Braking (AEB) with

Pedestrian Detection

• Intelligent

Forward

Collision

Warning

(I-FCW)

• Rear Automatic Braking (RAB)

For additional information, see “Automatic
Emergency Braking (AEB) with Pedestrian
Detection” (P. 5-80), “Intelligent Forward Col-
lision Warning (I-FCW)” (P. 5-90) and “Rear
Automatic Braking (RAB)” (P. 5-75).

Unavailable Side Radar Obstruction

This message appears when the Blind
Spot Warning (BSW) or Rear Cross Traffic
Alert (RCTA) systems become unavailable
because a radar blockage is detected. For
additional information, see “Blind Spot
Warning (BSW)” (P. 5-32) and “Rear Cross
Traffic Alert (RCTA)” (P. 5-42).

Vehicle ahead detection
indicator

This indicator appears when the Auto-
matic Emergency Braking (AEB) with Pe-
destrian Detection system is engaged and
has detected a vehicle.

For additional information, see “Automatic
Emergency Braking (AEB) with Pedestrian
Detection” (P. 5-80).

2-38

Instruments and controls

Your vehicle has two types of security
systems:
• Vehicle security system
• NISSAN Vehicle Immobilizer System

VEHICLE SECURITY SYSTEM

The vehicle security system provides visual
and audible alarm signals if someone
opens the doors or hood when the system
is armed. It is not, however, a motion detec-
tion type system that activates when a ve-
hicle is moved or when a vibration occurs.

The system helps deter vehicle theft but
cannot prevent it, nor can it prevent the
theft of interior or exterior vehicle compo-
nents in all situations. Always secure your
vehicle even if parking for a brief period.
Never leave your keys in the vehicle, and
always lock the vehicle when unattended.
Be aware of your surroundings, and park in
secure, well-lit areas whenever possible.

Many devices offering additional protec-
tion, such as component locks, identifica-
tion markers, and tracking systems, are
available at auto supply stores and spe-
cialty shops. A NISSAN dealer may also offer
such equipment. Check with your insur-
ance company to see if you may be eligible
for discounts for various theft protection
features.

How to arm the vehicle security
system

1. Close all windows.

(The system can be

armed even if the windows are open.)

2. Remove the Intelligent Key from the

vehicle.

3. Close all doors. Lock all doors. The doors

can be locked with the Intelligent Key or
door handle request switch.

4. Confirm that the

security indicator

light stays on for about 30 seconds. The
vehicle security system is now pre-
armed. The vehicle security system will
automatically

shift

into

the

armed

phase. The

security light begins to

flash once every three seconds. If during
the pre-armed phase one of the follow-
ing occurs, the system will not arm:

• Any door is unlocked with the Intelligent

Key or door request switch.

• Ignition switch is placed in ACC or ON

position.

•

Even when the driver and/or passen-
gers are in the vehicle, the system will
activate with all the doors, hood and
locked with the ignition switch placed
in the LOCK position. When placing the
ignition switch in the ACC or ON posi-
tion, the system will be released.

•

The lockable bedside storage com-
partment (if so equipped) is not pro-
tected by the vehicle security system.

LIC0359

SECURITY SYSTEMS

Instruments and controls

2-39

Vehicle security system activation

The vehicle security system will give the
following alarm:
• The headlights blink and the horn sounds

intermittently but synchronously.

• The alarm automatically turns off after a

period of time. However, the alarm reacti-
vates if the vehicle is tampered with
again.

The alarm is activated by:
• opening any door or hood without using

the Intelligent Key (even if the door is un-
locked by releasing the door inside lock
knob).

How to stop an activated alarm

The alarm stops only by pressing the
button on the Intelligent Key.

NISSAN VEHICLE IMMOBILIZER
SYSTEM

The NISSAN Vehicle Immobilizer System
will not allow the engine to start without
the use of a registered key.

If the engine fails to start using a registered
key (for example, when interference is
caused by another registered key, an auto-
mated toll road device or automatic pay-

ment device on the key ring), restart the
engine using the following procedures:

1. Leave the ignition switch placed in the

position

for

approximately

seconds.

2. Place the ignition switch in the OFF or

LOCK position and wait approximately
10 seconds.

3. Repeat steps 1 and 2.

4. Restart the engine while holding the de-

vice (which may have caused the inter-
ference) separate from the registered
key.

If the no start condition re-occurs, NISSAN
recommends placing the registered key on
a separate key ring to avoid interference
from other devices.

FCC Notice:

For USA:

This device complies with Part 15 of the
FCC Rules. Operation is subject to the fol-
lowing two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interfer-
ence received, including interference
that may cause undesired operation.

NOTE:

Changes or modifications not expressly
approved by the party responsible for
compliance could void the user's author-
ity to operate the equipment.

For Canada:

This device contains license-exempt
transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic
Development Canada’s licence-exempt
RSS(s). Operation is subject to the fol-
lowing two conditions: (1) This device
may not cause interference. (2) This de-
vice must accept any interference, in-
cluding interference that may cause un-
desired operation of the device.

2-40

Instruments and controls

Security indicator light

The security indicator light blinks whenever
the ignition switch is placed in the OFF,
LOCK or ACC position.

This function indicates the NISSAN Vehicle
Immobilizer System is operational.

If the NISSAN Vehicle Immobilizer System is
malfunctioning, the light will remain on
while the ignition switch is placed in the ON
position.

If the light still remains on and/or the
engine will not start, seek service for the
NISSAN Vehicle Immobilizer System as
soon as possible. Please bring all regis-
tered keys that you have. It is recom-
mended that you visit a NISSAN dealer
for this service.

SWITCH OPERATION

WARNING

In freezing temperatures the washer
solution may freeze on the windshield
and obscure your vision which may
lead to an accident. Warm the wind-
shield with the defroster before you
wash the windshield.

LIC0474

LIC3445

Type A (if so equipped)

WIPER AND WASHER SWITCH

Instruments and controls

2-41

CAUTION

•

Do not operate the washer continu-
ously for more than 30 seconds.

•

Do not operate the washer if the
windshield-washer fluid reservoir is
empty.

•

Do not fill the windshield-washer
fluid

reservoir

with

windshield-

washer fluid concentrates at full
strength.

Some

methyl

alcohol

based windshield-washer fluid con-
centrates may permanently stain the
grille

spilled

while

filling

the

windshield-washer fluid reservoir.

•

Pre-mix

windshield-washer

fluid

concentrates

with

water

the

manufacturer's recommended lev-
els before pouring the fluid into the
windshield-washer fluid reservoir.
Do not use the windshield-washer
fluid reservoir to mix the windshield-
washer fluid concentrate and water.

NOTE:

If the windshield wiper operation is in-
terrupted by snow or ice, the wiper may
stop moving to protect its motor. If this
occurs, turn the wiper switch to the OFF
position and remove the snow or ice that
is on and around the wiper arms. In ap-
proximately 1 minute, turn the switch on
again to operate the wiper.

The windshield wiper and washer operates
when the ignition switch is in the ON
position.

Rotate the end of the lever to operate the
wiper at the following speed:

䊊

Intermittent (INT) — intermittent opera-
tion can be adjusted by turning the
knob toward

(Slower) or

(Faster).

Also, the intermittent operation speed
varies in accordance with the vehicle
speed. (For example, when the vehicle
speed is high, the intermittent opera-
tion speed will be faster.)

䊊

Low (LO) — continuous low speed
operation

䊊

High (HI) — continuous high speed
operation

Rotate the lever the opposite direction

to have one sweep operation (MIST) of the
wiper.

Press the button on the end of the lever

to operate the washer. The wiper will also
operate several times.

NOTE:

The Speed Dependent feature may be
disabled. For additional information, see
“Vehicle information display” (P. 2-23).

LIC3035

Type B (if so equipped)

2-42

Instruments and controls

RAIN-SENSING AUTO WIPER
SYSTEM (if so equipped)

CAUTION

•

Do not touch the rain sensor and
around it when the wiper switch is in
the AUTO position and the ignition
switch is in the ON position. The wip-
ers may operate unexpectedly and
cause an injury or may damage a
wiper.

•

The rain-sensing auto wipers are in-
tended for use during rain. If the
switch is left in the AUTO position, the
wipers may operate unexpectedly
when dirt, fingerprints, oil film or in-
sects are stuck on or around the sen-
sor. The wipers may also operate
when exhaust gas or moisture affect
the rain sensor.

•

When the windshield glass is coated
with water repellent, the speed of the
rain-sensing auto wipers may be
higher even though the amount of
the rainfall is small.

•

Be sure to turn off the rain-sensing
auto wiper system when you use a
car wash.

•

The rain-sensing auto wipers may
not operate if rain does not hit the
rain sensor even if it is raining.

•

Using Genuine NISSAN wiper blades
is recommended for proper opera-
tion of the rain-sensing auto wiper
system. For additional information,
see

“Windshield

wiper

blades”

(P. 8-22).

The rain-sensing auto wiper system can
automatically turn on the wipers and ad-
just the wiper speed depending on the
rainfall and the vehicle speed by using the
rain sensor located on the upper part of
the windshield.

To set the rain-sensing auto wiper system,
rotate the lever to the AUTO position

The wiper will sweep once while the igni-
tion switch is in the ON position.

The rain sensor sensitivity level can be ad-
justed by turning the knob toward the front

(High) or toward the rear

(Low).

– High — High sensitive operation
– Low — Low sensitive operation

To turn the rain-sensing auto wiper system
off, rotate the lever to the OFF position, or
rotate the lever to the LO or HI position.

NOTE:

The rain sensor feature may be disabled.
For additional information, see “Vehicle
information display” (P. 2-23).

LIC3446

Instruments and controls

2-43

Nissan Titan (2022 year). Manual in english - page 9