|
|
The driver’s seat and steering wheel will ∙ When the ignition switch is turned to ACC or ON while the shift lever is in the P The entry/exit function can be adjusted or ∙ Switch the Exit Seat Slide from ON to OFF. ∙ Switch the Exit Steering Up from ON to OFF. Restarting the entry/exit function If the battery cable is disconnected or if the 1. Drive the vehicle over 25 mph (40 km/h). OR 2. Open and close the driver’s door more than two times with the ignition switch The entry/exit function should now work SYSTEM OPERATION The automatic drive positioner system will ∙ When the vehicle speed is above 4 mph (7 km/h). ∙ When any of the memory switches are pushed while the automatic drive posi- ∙ When the switch for the driver’s seat and steering column is pushed while ∙ When the seat has already been moved to the memorized position. ∙ When no seat position is stored in the memory switch. ∙ When the shift lever is moved from P (Park) to any other position. 3-34 Pre-driving checks and adjustments |