Nissan Altima Coupe (2013 year). Instruction

● CDs that are in poor condition or are

dirty, scratched or covered with finger-
prints may not work properly.

● The following CDs may not work prop-

erly:

● Copy control compact discs (CCCD)
● Recordable compact discs (CD-R)
● Rewritable compact discs (CD-RW)

● Do not use the following CDs as they

may cause the CD player to malfunc-
tion:

● 3.1 in (8 cm) discs with an adapter
● CDs that are not round
● CDs with a paper label
● CDs that are warped, scratched, or

have abnormal edges

● This audio system can only play pre-

recorded CDs. It has no capability to
record or burn CDs.

● If the CD cannot be played, one of the

following messages will be displayed.

CHECK DISC:

● Confirm that the CD is inserted cor-

rectly (the label side is facing up,
etc.).

● Confirm that the CD is not bent or

warped and it is free of scratches.

PRESS EJECT:

This is an error due to excessive tem-
perature inside the player. Remove the
CD by pressing the EJECT button. After
a short time, reinsert the CD. The CD
can be played when the temperature of
the player returns to normal.

UNPLAYABLE:

The file is unplayable in this audio sys-
tem (only MP3 or WMA (if so equipped)
CD).

CD/DVD combination player (models
with Navigation System)

● Do not force a disc into the CD/DVD

insert slot. This could damage the
CD/DVD player.

● During cold weather or rainy days, the

player may malfunction due to the hu-
midity. If this occurs, remove the
CD/DVD and dehumidify or ventilate
the player completely.

● The player may skip while driving on

rough roads.

● The CD/DVD player sometimes cannot

function when the passenger compart-
ment temperature is extremely high.
Decrease the temperature before use.

● Only use high quality 4.7 in (12 cm)

round discs that have the “COMPACT
disc DIGITAL AUDIO” or “DVD Video”
logo on the disc or packaging.

● Do not expose the CD/DVD to direct

sunlight.

● CDs/DVDs that are of poor quality,

dirty, scratched, covered with finger-
prints, or that have pinholes may not
work properly.

● The following CDs/DVDs are not guar-

anteed to play:

● Copy control compact discs (CCCD)
● Recordable compact discs (CD-R)
● Rewritable compact discs (CD-RW)

Monitor, climate, audio, phone and voice recognition systems

4-31

● Recordable compact discs (DVD±R,

DVD±R DL)

● Rewritable

compact

discs

(DVD±RW, DVD±RW DL)

● Do not use the following CDs/DVDs as

they may cause the CD/DVD player to
malfunction.

● 3.1 in (8 cm) discs
● CDs/DVDs that are not round
● CDs/DVDs with a paper label
● CDs/DVDs

that

are

warped,

scratched, or have abnormal edges

● This audio system can only play pre-

recorded CDs/DVDs. It has no capa-
bilities to record or burn CDs/DVDs.

● If the CD/DVD cannot be played, one of

the following messages will be dis-
played.

Disc Read Error:

● Confirm that the CD/DVD is inserted

correctly (the label side is facing up,
etc.).

● Confirm that the CD/DVD is not bent

or warped and it is free of scratches.

Please Eject Disc:

This error may be due to the tempera-
ture inside the player getting too high.
Remove the CD/DVD by pushing the
EJECT button, and after a short time
reinsert the CD/DVD. The CD/DVD can
be played when the temperature of the
player returns to normal. If the error
persists, consult your local dealership.

Unplayable File:

● The file may be copy protected.
● The file is not MP3, WMA, AAC, M4A

or DIVX type.

Region Invalid

● The DVD is not for region 1 or all

regions.

● Use DVDs with a region code “1”,

“ALL” or “1 included” for your DVD
entertainment system. (The region
code

䊊

is displayed as a small sym-

bol printed on the top of the DVD

䊊

This

vehicle-installed

DVD

player cannot play DVDs with a re-
gion code other than “1” or “ALL”.

Copyright and trademark

● The technology protected by the U.S.

patent and other intellectual property
rights

owned

Macrovision

Corporation and other right holders is
adopted for this system.

LHA0484

4-32

Monitor, climate, audio, phone and voice recognition systems

● This copyright protected technology

cannot be used without a permit from
Macrovision Corporation. It is limited
to personal use, etc., as long as the
permit from Macrovision Corporation
is not issued.

● Modifying or disassembling is prohib-

ited.

● Dolby digital is manufactured under li-

cense from Dolby Laboratories, Inc.

● Dolby and the double D mark “

”

are trademarks of Dolby Laboratories,
Inc.

● DTS and DTS Digital Surround “

”

are registered trademarks of Digital
Theater Systems, Inc.

Universal Serial Bus (USB) memory (if
so equipped)

This system supports various USB memory
sticks, USB hard drives and iPod

姞 players. There

are some USB devices which may not be sup-
ported with this system.

● Make sure that the USB device is connected

correctly into the USB connector.

● Do not force the memory stick or USB cable

into the USB connector.

● During cold weather or rainy days, the player

may malfunction due to the humidity. If this
occurs, remove the USB memory stick and
dehumidify or ventilate the player com-
pletely.

● The player sometimes cannot function when

the passenger compartment temperature is
extremely high. Decrease the temperature
before use.

● Do not leave the USB memory in a place

prone to static electricity or where the air
conditioner blows directly. The data in the
USB memory may be damaged.

● Prepare the USB device by yourself be-

cause it is not equipped with the vehicle.

● The USB device cannot be formatted with

this system. If you want to format the USB
memory, use your personal computer.

● Partitioned USB devices may not be played

correctly.

● Some characters used in other languages

(Chinese, Japanese, etc.) are not displayed
properly on the vehicle center screen.
NISSAN recommends using English lan-
guage characters with USB devices.

● Do not connect the USB device if the con-

nector or cable is wet. Allow the cable
and/or connectors to dry completely before
connecting the USB device.

● Large video podcast files cause slow re-

sponses in the iPod

姞. The vehicle center

display may momentarily black out, but it will
soon recover.

● If the iPod姞 automatically selects large video

podcast files while in the shuffle mode, the
vehicle center display may momentarily
black out, but it will soon recover.

● Audiobooks may not play in the same order

as they appear on the iPod

姞.

● The iPod姞 nano (1st Generation) may re-

main in fast forward or rewind mode if it is
connected during a seek operation. In this
case, please manually reset the iPod

姞.

● The iPod姞 nano (2nd Generation) will con-

tinue to fast forward or rewind if it is discon-
nected during a seek operation.

● An incorrect song title may appear when the

Play Mode is changed while using the iPod

姞

nano (2nd generation).

Monitor, climate, audio, phone and voice recognition systems

4-33

● If you are using an iPod姞 (3rd Generation

with Dock connector), do not use very long
names for the song title, album name or artist
name to avoid the iPod

姞 resetting itself.

iPod

姞 is a trademark of Apple Inc., registered in

the U.S. and other countries.

Bluetooth

姞 streaming audio (if so

equipped)

● Some Bluetooth姞 audio devices may not be

recognized by the in-vehicle audio system.

● It is necessary to set up the wireless con-

nection between a compatible Bluetooth

姞

audio device and the in-vehicle Bluetooth

姞

module before using the Bluetooth

姞 audio.

● Operating procedure of the Bluetooth姞 au-

dio will vary depending on the devices. Make
sure how to operate your audio device be-
fore using it with this system.

● The Bluetooth姞 audio may be stopped under

the following conditions:

● Receiving a call on the Hands-Free

Phone System.

● Checking the connection to the hands-

free phone.

● Do not place the Bluetooth姞 audio device in

an area surrounded by metal or far away from
the in-vehicle Bluetooth

姞 module to prevent

tone quality degradation and wireless con-
nection disruption.

● While an audio device is connected through

the Bluetooth

姞 wireless connection, the bat-

tery power of the device may discharge
quicker than usual.

● This system supports the Bluetooth姞 Audio

Distribution Profile (A2DP, AVRCP).

BLUETOOTH

威 is a

trademark owned by
Bluetooth SIG, Inc.
and licensed to
Clarion Co., Ltd.

Compact disc (CD) with MP3 or
WMA (models without Navigation
System)

Terms:

● MP3 — MP3 is short for Moving Pictures

Experts Group Audio Layer 3. MP3 is the
most well-known compressed digital audio
file format. This format allows for near “CD
quality” sound, but at a fraction of the size of
normal audio files. MP3 conversion of an
audio track from CD-ROM can reduce the
file size by approximately a 10:1 ratio with
virtually no perceptible loss in quality. MP3
compression removes the redundant and
irrelevant parts of a sound signal that the
human ear doesn’t hear.

● WMA — Windows Media Audio (WMA)* is a

compressed audio format created by Micro-
soft as an alternative to MP3. The WMA
codec offers greater file compression than
the MP3 codec, enabling storage of more
digital audio tracks in the same amount of
space when compared to MP3s at the same
level of quality.

4-34

Monitor, climate, audio, phone and voice recognition systems

● Bit rate — Bit rate denotes the number of

bits per second used by a digital music file.
The size and quality of a compressed digital
audio file is determined by the bit rate used
when encoding the file.

● Sampling frequency — Sampling frequency

is the rate at which the samples of a signal
are converted from analog to digital (A/D
conversion) per second.

● Multisession — Multisession is one of the

methods for writing data to media. Writing
data once to the media is called a single
session, and writing more than once is called
a multisession.

● ID3/WMA Tag — The ID3/WMA tag is the

part of the encoded MP3 or WMA file that
contains information about the digital music
file such as song title, artist, encoding bit
rate, track time duration, etc. ID3 tag infor-
mation is displayed on the Artist/song title
line on the display.

* Windows

姞 and Windows Media姞 are regis-

tered trademarks and trademarks in the United
States of America and other countries of Micro-
soft Corporation of the USA.

Playback order:

Music playback order of a CD with MP3 or WMA
files is as illustrated.

● The names of folders not containing MP3 or

WMA files are not shown in the display.

● If there is a file in the top level of the disc,

“Root Folder” is displayed.

● The playback order is the order in which the

files were written by the writing software.
Therefore, the files might not play in the
desired order.

Playback order chart

WHA1078

Monitor, climate, audio, phone and voice recognition systems

4-35

Specification chart:

Supported media

CD, CD-R, CD-RW

Supported file systems

ISO9660 LEVEL1, ISO9660 LEVEL2, Apple ISO, Romeo, Joliet * ISO9660 Level 3 (packet writing) is not supported.

Supported
versions*1

MP3

Version

MPEG1, MPEG2, MPEG2.5

Sampling frequency

8 kHz - 48 kHz

Bit rate

8 kbps - 320 kbps, VBR

WMA

Version

WMA7, WMA8, WMA9

Sampling frequency

32 kHz - 48 kHz

Bit rate

48 kbps - 192 kbps, VBR

Tag information

ID3 tag VER1.0, VER1.1, VER2.2, VER2.3 (MP3 only)

Folder levels

Folder levels: 8, Max folders: 255 (including root folder), Files: 512 (Max. 255 files for one folder)

Text character number limitation

128 characters

Displayable character codes*2

01: ASCII, 02: ISO-8859-1, 03: UNICODE (UTF-16 BOM Big Endian), 04: UNICODE (UTF-16 Non-BOM Big Endian), 05:
UNICODE (UTF-8), 06: UNICODE (Non-UTF-16 BOM Little Endian)

*1 Files created with a combination of 48 kHz sampling frequency and 64 kbps bit rate cannot be played.

*2 Available codes depend on what kind of media, versions and information are going to be displayed.

4-36

Monitor, climate, audio, phone and voice recognition systems

Troubleshooting guide:

Symptom

Cause and Countermeasure

Cannot play

Check if the disc was inserted correctly.

Check if the disc is scratched or dirty.

Check if there is condensation inside the player. If there is, wait until the condensation is gone (about 1 hour) before using the player.

If there is a temperature increase error, the CD player will play correctly after it returns to the normal temperature.

If there is a mixture of music CD files (CD-DA data) and MP3/WMA files on a CD, only the music CD files (CD-DA data) will be played.

Files with extensions other than “.MP3”,“.WMA”, “.mp3” or “.wma” cannot be played. In addition, the character codes and number of characters for
folder names and file names should be in compliance with the specifications.

Check if the finalization process, such as session close and disc close, is done for the disc.

Check if the disc is protected by copyright.

Poor sound quality

Check if the disc is scratched or dirty.

Bit rate may be too low.

It takes a relatively long time
before the music starts
playing.

If there are many folders or file levels on the MP3/WMA disc, or if it is a multisession disc, some time may be required before the music starts playing.

Music cuts off or skips

The writing software and hardware combination might not match, or the writing speed, writing depth, writing width, etc., might not match the
specifications. Try using the slowest writing speed.

Skipping with high bit rate
files

Skipping may occur with large quantities of data, such as for high bit rate data.

Moves immediately to the
next song when playing

When a non-MP3/WMA file has been given an extension of “.MP3”, “.WMA”, .“mp3”or “.wma”, or when play is prohibited by copyright protection, there
will be approximately 5 seconds of no sound and then the player will skip to the next song.

Songs do not play back in
the desired order

The playback order is the order in which the files were written by the writing software. Therefore, the files might not play in the desired order.

Monitor, climate, audio, phone and voice recognition systems

4-37

CD, DVD or USB with Compressed
Audio Files (models with Navigation
System)

The file types supported by this system are MP3,
WMA, AAC/M4A and ATRAC3.

Explanation of terms:

● MP3 — MP3 is short for Moving Pictures

Experts Group Audio Layer 3. MP3 is the
most well known compressed digital audio
file format. This format allows for near “CD
quality” sound, but at a fraction of the size of
normal audio files. MP3 conversion of an
audio track can reduce the file size by ap-
proximately 10:1 ratio (Sampling: 44.1 kHz,
Bit rate: 128 kbps) with virtually no percep-
tible loss in quality. The compression re-
duces certain parts of sound that seem in-
audible to most people.

● WMA — Windows Media Audio (WMA) is a

● AAC/M4A — Advanced Audio Coding

(AAC) is a lossy audio compression format.
Audio files that have been encoded with
AAC are generally smaller in size and deliver
a higher quality of sound than MP3.

● ATRAC3, ATRAC3 Plus — Adaptive Trans-

form Acoustic Coding (ATRAC) is a lossy
audio compression format developed by
Sony.

● Bit rate — Bit rate denotes the number of

bits per second used by a digital music file.
The size and quality of a compressed digital
audio file is determined by the bit rate used
when encoding the file.

● Sampling frequency — Sampling frequency

is the rate at which the samples of a signal
are converted from analog to digital (A/D
conversion) per second.

● Multisession — Multisession is one of the

methods for writing data to media. Writing
data once to the media is called a single
session, and writing more than once is called
a multisession.

● ID3/WMA Tag — The ID3/WMA tag is the

part of the encoded MP3 or WMA file that
contains information about the digital music
file such as song title, artist, album title,
encoding bit rate, track time duration, etc.
ID3 tag information is displayed on the
Album/Artist/Track title line on the display.

* Windows

姞, Windows Media姞 and Windows

Vista

姞 are registered trademarks or trademarks

of Microsoft Corporation in the United States of
America and/or other countries.

4-38

Monitor, climate, audio, phone and voice recognition systems

Specification chart:

Supported media

CD, CD-R, CD-RW, DVD-ROM, DVD±R, DVD±RW, DVD±R DL, USB 2.0

Supported file systems

CD, CD-R, CD-RW, DVD-ROM, DVD±R, DVD±RW, DVD±R DL, ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet
* ISO9660 Level 3 (packet writing) is not supported.
* Files saved using the Live File System component (on a Windows Vista

姞 operating system-based computer) are not

supported.

UDF Bridge (UDF 1.02 + ISO9660), UDF 1.5, UDF 2.0
* VDF 1.5/VDF 2.0 (packet writing) is not supported.

USB memory: FAT16, FAT32

Supported
versions*1

MP3

Version

MPEG1, MPEG2, MPEG2.5

Sampling frequency

8 kHz - 48 kHz

Bit rate

8 kbps - 320 kbps, VBR*4

WMA*2

Version

WMA7, WMA8, WMA9

Sampling frequency

32 kHz - 48 kHz

Bit rate

32 kbps - 192 kbps, VBR*4

AAC

Sampling frequency

8 kHz - 96 kHz

Bit rate

16 kbps - 320 kbps, VBR*4

ATRAC

Version

ATRAC3, ATRAC3 Plus

Tag information (Song title and artist name)

ID3 tag VER1.0, VER1.1, VER2.2, VER2.3, VER 2.4 (MP3 only)

WMA tag (WMA only)

Folder levels

Folder levels: 8, Folders: 255 (including root folder), Files: 512 (Max. 255 files for one folder)

Text character number limitation

128 characters

Displayable character codes*3

01: ASCII, 02: ISO-8859-1, 03: UNICODE (UTF-16 BOM Big Endian), 04: UNICODE (UTF-16 Non-BOM Big Endian),
05: UNICODE (UTF-8), 06: UNICODE (Non-UTF 16 BOM Little Endian), 07: SHIFT-JIS

*1 Files created with a combination of 48 kHz sampling frequency and 64 kbps bit rate cannot be played.

*2 Protected WMA files (DRM) cannot be played.

*3 Available codes depend on what kind of media, versions and information are going to be displayed.

*4 When VBR files are played, the playback time may not be displayed correctly.

4-40

Monitor, climate, audio, phone and voice recognition systems

Troubleshooting guide:

Symptom

Cause and Countermeasure

Cannot play

Check if the CD/DVD/USB device was inserted correctly.

Check if the CD/DVD is scratched or dirty.

Check if there is condensation inside the player. If there is, wait until the condensation is gone (about 1 hour) before using the player.

If there is a temperature increase error, the player will play correctly after it returns to the normal temperature.

If there is a mixture of music CD files (CD-DA data) and compressed audio files on a CD, only the music CD files (CD-DA data) will be played.

Files with extensions other than “.MP3”, “.WMA”, “.AAC”, “.M4A” or “.AA3” cannot be played. In addition, the character codes and number of charac-
ters for folder names and file names should be in compliance with the specifications.

Check if the disc or file is generated in an irregular format. This may occur depending on the variation or the setting of the compressed audio file writ-
ing application or other text editing applications.

Check if the finalization process, such as session close and disc close, is done for the disc.

Check if the CD/DVD/USB device is protected by copyright.

Poor sound quality

Check if the CD/DVD is scratched or dirty.

It takes a relatively long time
before the music starts
playing.

If there are many folders or file levels on the CD/DVD/USB device, or if it is a multisession disc, some time may be required before the music starts
playing.

Music cuts off or skips

The writing software and hardware combination might not match, or the writing speed, writing depth, writing width, etc., might not match the
specifications. Try using the slowest writing speed.

Skipping with high bit rate
files

Skipping may occur with large quantities of data, such as for high bit rate data.

Moves immediately to the
next song when playing

If an unsupported compressed audio file has been given a supported extension like “.MP3”, or when play is prohibited by copyright protection, the
player will skip to the next song.

Songs do not play back in
the desired order

The playback order is the order in which the files were written by the writing software. Therefore, the files might not play in the desired order.

Random/Shuffle may be active on the audio system or on the USB device.

Monitor, climate, audio, phone and voice recognition systems

4-41

Compressed Video Files (models with
Navigation System)

Explanation of terms:

● DivX – DivX refers to the DivX姞 codec

owned by Div, Inc. used for a lossy compres-
sion of video based on MPEG-4.

● AVI – AVI stands for Audio Video Interleave.

It is standard file format originated by Micro-
soft Corporation. A .divx encoded file can be
saved into the .avi file format for playback on
this system if it meets the requirements
stated in the table in this section. However,
all .avi files are not playable on this system
since different encodings can be used other
than the DivX

姞 codec.

● ASF – ASF stands for Advanced Systems

Format. It is a file format owned by Microsoft
Corporation. Note: Only .asf files that meet
the requirements stated in the table in this
section can be played.

● Bit rate — Bit rate denotes the number of

bits per second used by a digital video files.
The size and quality of a compressed digital
audio file is determined by the bit rate used
when encoding the file.

4-42

Monitor, climate, audio, phone and voice recognition systems

Requirements for Supporting Video Playback:

Media

CD, CD-R, CD-RW, DVD, DVD±R, DVD±RW, DVD±RW DL, USB 2.0 Memory

File Systems

CD, CD-R, CD-RW, DVD,
DVD±R, DVD±RW, DVD±RW
DL

ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet, UDF Bridge (UDF1.02+ISO9660), UDF1.5, UDF2.0
* ISO9660 Level 3 (packet writing) is not supported.
* Files saved using the Live File System component (on a Windows Vista-based computer) are not supported.
* VDF1.5/VDF2.0 (packet writing) is not supported.

USB Memory

FAT16, FAT32

File Types

.divx, .avi

Video Codecs

DivX3, DivX4, DivX5, DivX6

Audio Codecs

MP3, MPEG2.5 Audio Layer3, AC3, LPCM

.asf

Video Codec

ISO-MPEG4

Audio Codec

G.726

Bit Rates

.divx, .avi

Maximum Average

4 Mbps

Maximum Peak

8 Mbps

Resolution

.divx, .avi

Minimum

32 x 32

Maximum

720 x 480

.asf

Minimum

32 x 32

Maximum

720 x 576

Monitor, climate, audio, phone and voice recognition systems

4-43

SEEK/TRACK button

CD insert slot

TUNE/FF·REW button

CD eject button

AUDIO button (BASS, TREBLE, FADE
and BALANCE)

CLOCK button

AUX IN jack

SCAN button

RDM/RPT button

10. PWR/VOL control knob
11. AUX button

12. RADIO button
13. CD button
14. DISP button
15. PRESET A·B·C button
16. Station select (1 - 6) buttons
17.

pause/mute button

FM/AM RADIO WITH COMPACT
DISC (CD) PLAYER (if so equipped)

For all operation precautions, see “Audio opera-
tion precautions” earlier in this section.

Audio main operation

PWR/VOL control knob

Place the ignition switch in the ACC or ON
position, then press the PWR/VOL control knob.
If you listen to the radio with the engine not
running, place the ignition in the ACC position.
The mode (radio or CD) that was playing imme-
diately before the system was turned off resumes
playing.

When no CD is loaded, the radio comes on.
Pressing the PWR/VOL control knob again turns
the system off.

Turn the PWR/VOL control knob to the right to
increase volume or to the left to decrease volume.

LHA0728

4-44

Monitor, climate, audio, phone and voice recognition systems

AUDIO button (Bass, Treble, Fade and
Balance)

Press the AUDIO button to change the mode as
follows:

Bass

→ Treble → Fade → Balance → Beep

ON/OFF

→ Audio → Bass

To adjust Bass, Treble, Fade and Balance press
the AUDIO button until the desired mode ap-
pears

the

display.

Press

the

TUNE/FF·REW

to adjust Bass

and Treble to the desired level. You can also use
the TUNE/FF·REW button to adjust Fade and
Balance mode. Fade adjusts the sound level be-
tween the front and rear speakers and Balance
adjusts the sound between the right and left
speaker.

To turn the Beep sound off or on, press the
AUDIO button until Beep is displayed. Press the

TUNE/FF·REW button

until the

desired mode is displayed. This turns on or turns
off the beep sound when audio buttons are
pressed.

Once you have adjusted the sound quality to the
desired level, press the AUDIO button repeatedly
until the radio or CD display reappears. Other-
wise, the radio or CD display will automatically
reappear after about 10 seconds.

DISP (display) button:

Pressing the DISP (display) button will show text
about CD information in the audio display.

If the text information is to long to fully be dis-
played on the screen; press and hold the DISP
button for longer than 1.5 seconds to scroll
through the rest of the text.

CD display mode

To change the text displayed while playing a CD
with text, press the DISP button. The DISP button
will allow you to scroll

through CD text as follows: Track number and
Track time

→ Album title → Song title.

● Track number displays the track number se-

lected on the disc.

● Track time displays the amount of time the

track has played.

● Album title displays the title of the CD being

played.

● Song title displays the title of the selected

CD track.

Clock operation

Pressing the CLOCK button displays the clock
with the radio on or off. Press the CLOCK button
again to turn off the clock display.

Clock set

1. Press and hold the CLOCK button for ap-

proximately 2 seconds.

2. The display will show “H-Seek M-Tune”.

3. Press

the

SEEK/TRACK

button

to adjust the hours.

4. Press

TUNE/FF·REW

button

to adjust the minutes.

5. Press the CLOCK button again to exit the

clock set mode.

The display will return to the regular clock display
after 10 seconds, or you may press the CLOCK
button again to return to the regular clock display.

pause/mute button:

To mute or pause the audio sound, press

the

pause/mute button. Press the

button again to resume the audio sound.

Monitor, climate, audio, phone and voice recognition systems

4-45

FM/AM radio operation

FM/AM band select:

Pressing the RADIO button will change the band
as follows:

←→ FM

When the RADIO button is pressed while the
ignition switch is in the ACC or ON position, the
radio will come on at the station last played.

If a compact disc is playing when the RADIO
button is pressed, the compact disc will auto-
matically be turned off and the last radio station
played will come on.

The FM stereo indicator, ST, illuminates during
FM stereo reception. When the stereo broadcast
signal is weak, the radio automatically changes
from stereo to monaural reception.

TUNE/FF·REW (tuning)

button:

Press the TUNE/FF·REW button

for manual tuning. To move quickly through the
channels, hold the tuning buttons down.

SEEK (tuning) button:

Press the SEEK/TRACK button

to tune from high to low or low to high frequen-
cies and stop at the next broadcasting station.

SCAN (tuning) button:

Press the SCAN button. SCAN illuminates in the
display window. Scan tuning begins from low to
high frequencies. Scan tuning stops for 5 sec-
onds at each broadcasting station that has suffi-
cient signal strength. When scanning, SCAN
blinks in the display. Pressing the SCAN button
again during this 5 second period stops scan
tuning and the radio remains tuned to that station.

Station memory operations:

18 stations can be set for the FM and AM radio to
the A, B and C preset button in any combination
of AM or FM stations.

1. Press the PRESET A·B·C button to change

between storage banks. The radio displays
the icon A, B or C to indicate which set of
presets are active.

2. Tune to the desired station using manual

TUNE or SEEK tuning. Press and hold any of
the desired station memory buttons (1 – 6)
until a beep sound is heard. (The radio mutes
when the select button is pressed.)

3. The channel indicator will then come on and

the sound will resume. Programming is now
complete.

4. Other buttons can be set in the same man-

ner.

If the battery cable is disconnected, or if the fuse
opens, the radio memory will be canceled. In that
case, reset the desired stations.

Compact disc (CD) player operation

Place the ignition switch in the ACC or ON
position, and carefully insert the compact disc
into the slot with the label side up. The compact
disc is automatically pulled into the slot and starts
to play.

If the radio is already operating, it automatically
turns off and the compact disc begins to play.

CD button:

When the CD button is pressed with a compact
disc loaded and the radio playing, the radio turns
off and the last used compact disc starts to play.

4-46

Monitor, climate, audio, phone and voice recognition systems

Nissan Altima Coupe (2013 year). Instruction - part 12