Nissan Frontier D40. Manual - part 52

BCS-18

< FUNCTION DIAGNOSIS >

DIAGNOSIS SYSTEM (BCM)

MULTIREMOTE ENT

MULTIREMOTE ENT : CONSULT-III Function (BCM - MULTIREMOTE ENT)

INFOID:0000000005275676

WORK SUPPORT

Hazard and horn reminder mode

DATA MONITOR

ACTIVE TEST

Work Item

Description

HORN CHIRP SET

Horn chirp function mode can be changed in this mode. The function mode will be changed when 
"ON" or "OFF" on CONSULT-III screen is touched.

HAZARD LAMP SET

• MODE1: Nothing
• MODE2: Unlock only
• MODE3: Lock only
• MODE4: Lock and unlock

MULTI ANSWER BACK SET

Hazard and horn reminder mode can be changed in this mode. See table below for details. 

AUTO LOCK SET

• MODE1:  5  minutes 
• MODE2: Nothing
• MODE3:  1  minute

PANIC ALARM SET

• MODE1: 0.5 seconds 
• MODE2: Nothing
• MODE3: 1.5 seconds

PW DOWN SET

• MODE1: 2 seconds 
• MODE2: Nothing
• MODE3: 5 seconds

REMO CONT ID REGIST

Keyfob ID code can be registered.

REMO CONT ID ERASUR

Keyfob ID code can be erased.

REMO CONT ID CONFIR

It can be checked whether keyfob ID code is registered or not in this mode.

MODE 1

(C mode)

MODE 2

(S mode)

Keyfob
operation 

Lock

Unlock

Lock

Unlock

Hazard warning lamp flash

Twice

Once

Twice

—

Horn sound

Once

—

—

—

Monitor Item

[Unit}

Condition

IGN ON SW [ON/OFF]

Indicates condition of ignition switch in ON position

KEY ON SW [ON/OFF]

Indicates condition of key switch

ACC ON SW [ON/OFF]

Indicates condition of ignition switch in ACC position

KEYLESS LOCK [ON/OFF]

Indicates condition of lock signal from keyfob

KEYLESS UNLOCK [ON/OFF]

Indicates condition of unlock signal from keyfob

KEYLESS PANIC [ON/OFF]

Indicates condition of panic signal from keyfob

DOOR SW-DR [ON/OFF]

Indicates condition of front door switch (all) and rear door switch upper and lower (king cab) LH

DOOR SW-AS [ON/OFF]

Indicates condition of front door switch (all) and rear door switch upper and lower (king cab) RH

DOOR SW-RR [ON/OFF]

Indicates condition of rear door switch RH (crew cab)

DOOR SW-RL [ON/OFF]

Indicates condition of rear door switch LH (crew cab)

CDL LOCK SW [ON/OFF]

Indicates condition of door lock and unlock switch

CDL UNLOCK SW [ON/OFF]

Indicates condition of door lock and unlock switch

BCS

DIAGNOSIS SYSTEM (BCM)

BCS-19

< FUNCTION DIAGNOSIS >

C

D

E

F

G

H

I

J

K

L

B

A

O

P

N

HEADLAMP

HEADLAMP : CONSULT-III Function (BCM - HEAD LAMP)

INFOID:0000000005275677

WORK SUPPORT

*: Initial setting

DATA MONITOR

ACTIVE TEST

Test Item

Description

DOOR LOCK

This test is able to check door lock operation. The doors lock and unlock based on the item on CON-
SULT-III screen touched.

PW REMOTO DOWN SET

This test is able to check power window down operation. The windows are lowered when “ON” on 
CONSULT-III screen is touched.

FLASHER

This test is able to check right and left hazard reminder operation. The right hazard lamp turns on 
when “RH” on CONSULT-III screen is touched and the left hazard lamp turns on when "LH" on CON-
SULT-III screen is touched.

HORN

This test is able to check panic alarm and horn reminder operations. The alarm activate for 0.5 sec-
onds after “ON” on CONSULT-III screen is touched.

Work Item

Setting item

Setting

BATTERY SAVER SET

ON*

With the exterior lamp battery saver function

OFF

Without the exterior lamp battery saver function

Monitor Item

[Unit]

Description

IGN ON SW [ON/OFF]

Ignition switch (ON) status judged from IGN signal (ignition power supply)

ACC ON SW [ON/OFF]

Ignition switch (ACC) status judged from ACC signal (accessory power supply)

HI BEAM SW [ON/OFF]

Each switch status that BCM judges from the combination switch reading function

HEAD LAMP SW 1 [ON/OFF]

HEAD LAMP SW 2 [ON/OFF]

LIGHT SW 1ST [ON/OFF]

AUTO LIGHT SW [ON/OFF]

PASSING SW [ON/OFF]

FR FOG SW [ON/OFF]

TURN SIGNAL R [ON/OFF]

TURN SIGNAL L [ON/OFF]

DOOR SW-DR [ON/OFF]

The switch status input from front door switch LH

DOOR SW-AS [ON/OFF]

The switch status input from front door switch RH

DOOR SW-RR [ON/OFF]

The switch status input from rear door switch RH

DOOR SW-RL [ON/OFF]

The switch status input from rear door switch LH

CARGO LAMP SW [ON/OFF]

Cargo lamp status that BCM judges from the vehicle condition

OPTICAL SENSOR [ON/OFF]

The value of exterior brightness voltage input from the optical sensor

Test Item

Operation

Description

TAIL LAMP

ON

Transmits the position light request signal to IPDM E/R with CAN com-
munication to turn the tail lamp ON.

OFF

Stops the tail lamp request signal transmission.

BCS-20

< FUNCTION DIAGNOSIS >

DIAGNOSIS SYSTEM (BCM)

WIPER

WIPER : CONSULT-III Function (BCM - WIPER)

INFOID:0000000005275678

WORK SUPPORT

*: Factory setting

DATA MONITOR

ACTIVE TEST

HEAD LAMP

HI

Transmits the high beam request signal with CAN communication to turn 
the headlamp (HI).

LO

Transmits the low beam request signal with CAN communication to turn 
the headlamp (LO).

OFF

Stops the high & low beam request signal transmission.

FR FOG LAMP

ON

Transmits the front fog lights request signal to IPDM E/R with CAN com-
munication to turn the front fog lamp ON.

OFF

Stops the front fog lights request signal transmission.

CARGO LAMP

ON

Transmits the cargo lamp request signal to IPDM E/R with CAN commu-
nication to turn the each lamp ON.

OFF

Stops the cargo lamp request signal transmission.

Test Item

Operation

Description

Work Item

Setting 

Item

Description

WIPER SPEED 
SETTING

ON

With vehicle speed
(Front wiper intermittent time linked with the vehicle speed and wiper intermittent dial position)

OFF*

Without vehicle speed
(Front wiper intermittent time linked with the wiper intermittent dial position)

Monitor Item

[Unit]

Description

IGN ON SW [ON/OFF]

Ignition switch ON status judged from ignition power supply

IGN SW CAN [ON/OFF]

Ignition switch ON status received from IPDM E/R with CAN communication

FR WIPER HI [ON/OFF]

Each switch status that BCM judges from the combination switch reading function

FR WIPER LOW [ON/OFF]

FR WIPER INT [ON/OFF]

FR WASHER SW [ON/OFF]

INT VOLUME [1 - 7]

Each switch status that BCM judges from the combination switch reading function

FR WIPER STOP [ON/OFF]

Front wiper motor (stop position) status received from IPDM E/R with CAN communica-
tion

VEHICLE SPEED [km/h]

The value of the vehicle speed signal received from combination meter with CAN com-
munication

Test Item

Operation

Description

FR WIPER

HI

Transmits the front wiper request signal (HI) to IPDM E/R with CAN communication to op-
erate the front wiper HI operation.

LO

Transmits the front wiper request signal (LO) to IPDM E/R with CAN communication to 
operate the front wiper LO operation.

INT

Transmits the front wiper request signal (INT) to IPDM E/R with CAN communication to 
operate the front wiper INT operation.

OFF

Stops transmitting the front wiper request signal to stop the front wiper operation.

BCS

DIAGNOSIS SYSTEM (BCM)

BCS-21

< FUNCTION DIAGNOSIS >

C

D

E

F

G

H

I

J

K

L

B

A

O

P

N

FLASHER

FLASHER : CONSULT-III Function (BCM - FLASHER)

INFOID:0000000005275679

DATA MONITOR

ACTIVE TEST

AIR CONDITIONER

AIR CONDITIONER : CONSULT-III Function (BCM - AIR CONDITIONER)

INFOID:0000000005275680

DATA MONITOR

COMB SW

COMB SW : CONSULT-III Function (BCM - COMB SW)

INFOID:0000000005275681

DATA MONITOR

Monitor Item

[Unit]

Description

IGN ON SW [ON/OFF]

Ignition switch (ON) status judged from IGN signal (ignition power supply)

HAZARD SW [ON/OFF]

The switch status input from the hazard switch

TURN SIGNAL R [ON/OFF]

Each switch condition that BCM judges from the combination switch reading function

TURN SIGNAL L [ON/OFF]

BRAKE SW [ON/OFF]

The switch status input from the brake switch

Test Item

Operation

Description

FLASHER

RH

Outputs the voltage to turn the right side turn signal lamps ON.

LH

Outputs the voltage to turn the left side turn signal lamps ON.

OFF

Stops the voltage to turn the turn signal lamps OFF.

Monitor Item

[Unit]

Contents

IGN ON SW [ON/OFF]

Display [ignition switch position (On)/(Off), ACC position (Off)] status as judged from ignition 
switch signal

FAN ON SIG [ON/OFF]

Display [FAN (On)/FAN (Off)] status as judged form blower fan motor switch signal

AIR COND SW [ON/OFF]

Display [COMP (On)/COMP (Off)] status as judged from air conditioner switch signal

Monitor Item

[Unit]

Description

TURN SIGNAL R 
[OFF/ON]

Displays the status of the TURN RH switch in combination switch judged by BCM with the combination switch 
reading function

TURN SIGNAL L 
[OFF/ON]

Displays the status of the TURN LH switch in combination switch judged by BCM with the combination switch 
reading function

HI BEAM SW 
[OFF/ON]

Displays the status of the HI BEAM switch in combination switch judged by BCM with the combination switch 
reading function

HEAD LAMP SW 1
[OFF/ON]

Displays the status of the HEADLAMP switch in combination switch judged by BCM with the combination 
switch reading function

HEAD LAMP SW 2
[OFF/ON]

Displays the status of the HEADLAMP switch in combination switch judged by BCM with the combination 
switch reading function

LIGHT SW 1ST
[OFF/ON]

Displays the status of the HEADLAMP switch in combination switch judged by BCM with the combination 
switch reading function