|
|
Battery Applied model TD27Ti ZD30DDTi Type L2-580 R (65 Ah) L2-580 L (65 Ah) L3-760 R (75 Ah) L3-760 L (75 Ah) Capacity V-AH 12-55 12-64 Starter Type S13-327 S13-527B S14-405B HITACHI make Applied model TD27Ti ZD30DDTi System voltage V 12 No-load Terminal voltage V 11.0 Current A Less than 160 Revolution rpm More than 4,000 More than 3,300 More than 3,400 Minimum diameter of commutator mm (in) 35.5 (1.398) 35.5 (1.398) Minimum length of brush mm (in) 9.0 (0.354) 11.0 (0.433) 11.0 (0.433) Brush spring tension N (kg, lb) — 28.4 - 34.3 (2.9 - 3.5, 6.4 - 7.7) 28.4 - 34.3 (2.9 - 3.5, 6.4 - 7.7) Clearance between bearing metal and armature shaft mm (in) — — — Clearance “ ” between pinion front edge and pinion stopper mm (in) — — — Movement “ ” in height of pinion assembly mm (in) 0.3 - 1.5 (0.012 - 0.059) 0.3 - 2.0 (0.012 - 0.079) 0.3 - 2.0 (0.012 - 0.079) Alternator Type LR190-752 0 123 310 051 HITACHI make BOSCH make Applied model ZD30DDTi TD27Ti Nominal rating V-A 12-90 12-70 Ground polarity Negative Minimum revolutions under no-load (When rpm Less than 1,000 Less than 1,000 Hot output current (When 13.5V is applied) A/rpm More than 23/1,300 More than 26/1,300 Regulated output voltage V 14.1 - 14.7 Minimum length of brush mm (in) More than 6.0 (0.237) 2 (0.08) Brush spring pressure N (g, oz) 1.00 - 3.43 (102 - 350, 3.60 - 12.34) 1.80 - 2.40 (184.6 - 244.8, 6.47 - 8.63) Slip ring minimum diameter mm (in) More than 26.0 (1.024) 13.8 (0.543) Rotor coil resistance at 20° (68°F) Ω 2.67 2.47 - 2.73 SERVICE DATA AND SPECIFICATIONS (SDS) SC-30 |