|
|
PWC-96 < DTC/CIRCUIT DIAGNOSIS > [DRIVER SIDE WINDOW ANTI-PINCH] POWER SUPPLY AND GROUND CIRCUIT DTC/CIRCUIT DIAGNOSIS POWER SUPPLY AND GROUND CIRCUIT POWER WINDOW MAIN SWITCH POWER WINDOW MAIN SWITCH : Diagnosis Procedure INFOID:0000000009653369 1. CHECK POWER SUPPLY 1. Turn ignition switch OFF. 2. Disconnect power window main switch connector. 3. Check voltage between power window main switch harness connector and ground. Is the inspection result normal? YES >> GO TO 3. NO >> GO TO 2. 2. CHECK POWER SUPPLY CIRCUIT 1. Turn ignition switch OFF. 2. Disconnect BCM connector. 3. Check continuity between BCM harness connector and power window main switch harness connector. 4. Check continuity between BCM harness connector and ground. Is the inspection result normal? YES >> Replace BCM. Refer to BCS-98, "Removal and Installation" NO >> Repair or replace harness. 3. CHECK GROUND CIRCUIT 1. Turn ignition switch OFF. 2. Check continuity between power window main switch harness connector and ground. Is the inspection result normal? YES >> INSPECTION END NO >> Repair or replace harness. FRONT POWER WINDOW SWITCH (PASSENGER SIDE) (+) (-) Condition Voltage (V) Power window main switch Connector Terminal D5 10 Ground Ignition switch ON 9 – 16 D6 19 OFF BCM Power window main switch Continuity Connector Terminal Connector Terminal M123 68 D5 10 Existed 69 D6 19 BCM Ground Continuity Connector Terminal M123 68 Not existed 69 Power window main switch Ground Continuity Connector Terminal D6 17 Existed |