Nissan Quest E52. Manual - part 346

DLK-98

< SYSTEM DESCRIPTION >

DIAGNOSIS SYSTEM (BCM)

TRUNK

TRUNK : CONSULT Function (BCM - TRUNK)

INFOID:0000000009649014

DATA MONITOR

NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.

LCD

This test is able to check meter display information
• Engine start information displays when “BP N” on CONSULT screen is touched
• Engine start information displays when “BP I” on CONSULT screen is touched
• Key ID warning displays when “ID NG” on CONSULT screen is touched
• ROTAT: This item is displayed, but cannot be used.
• P position warning displays when “SFT P” on CONSULT screen is touched
• INSRT: This item is displayed, but cannot be monitored 
• BATT: This item is displayed, but cannot be monitored 
• Take away through window warning displays when “NO KY” on CONSULT screen is 

touched

• Take away warning display when “OUTKEY” on CONSULT screen is touched
• OFF position warning display when “LK WN” on CONSULT screen is touched

FLASHER

This test is able to check hazard warning lamp operation
• LH: LH side hazard warning lamps operate
• RH: RH side hazard warning lamps operate
• Off: Non-operation

P RANGE

This test is able to check CVT shift selector power supply
• On: Operate
• Off: Non-operation

ENGINE SW ILLUMI

This test is able to check push-button ignition switch illumination operation
• On: Operate
• Off: Non-operation

LOCK INDICATOR

This test is able to check LOCK indicator (push-button ignition switch) operation
• On: Operate
• Off: Non-operation

ACC INDICATOR

This test is able to check ACC indicator (push-button ignition switch) operation
• On: Operate
• Off: Non-operation

IGNITION ON IND

This test is able to check ON indicator (push-button ignition switch) operation
• On: Operate
• Off: Non-operation

HORN

This test is able to check horn operation
• On: Operate
• Off: Non-operation

TRUNK/BACK DOOR

NOTE:
This item is displayed, but cannot be used

POWER SLIDE DOOR

This test is able to check automatic siding door operation
• RR PSD ON: Auto open/close operate
• RL PSD ON: Auto open/close operate

Test item

Description

Monitor Item

Contents

PUSH SW

Indicates [On/Off] condition of push switch

UNLK SEN -DR

Indicates [On/Off] condition of unlock sensor

VEH SPEED 1

Indicates [km/h] condition of vehicle speed signal from combination meter

TR/BD OPEN SW

Indicates [On/Off] condition of back door opener switch

DIAGNOSIS SYSTEM (BCM)

DLK-99

< SYSTEM DESCRIPTION >

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

TRNK/HAT MNTR

NOTE:
This item is displayed, but cannot be monitored

RKE-TR/BD

NOTE:
This item is displayed, but cannot be monitored

Monitor Item

Contents

DLK-100

< SYSTEM DESCRIPTION >

DIAGNOSIS SYSTEM (AUTOMATIC BACK DOOR CONTROL UNIT)

DIAGNOSIS SYSTEM (AUTOMATIC BACK DOOR CONTROL UNIT)

CONSULT Function (AUTOMATIC BACK DOOR CONTROL UNIT)

INFOID:0000000009649015

APPLICATION ITEM

CONSULT performs the following functions via CAN communication with automatic back door control unit.

DATA MONITOR

NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.

SELF-DIAG RESULT

Refer to 

DLK-109, "DTC Index"

.

Diagnosis mode

Function Description

Self Diagnostic Result

Displays the diagnosis results judged by automatic back door control unit

CAN Diag Support Monitor

Monitors the reception status of CAN communication viewed from automatic back door 
control unit

Data Monitor

The automatic back door control unit input/output signals are displayed

Ecu Identification

The automatic back door control unit part number is displayed

Monitor Item

Unit

Description

VHCL SPEED MTR

[km/h]

Display the vehicle speed signal received from combination meter by nu-
merical value

VHCL SPEED ABS

[km/h]

Display the vehicle speed signal received from ABS actuator and electrical 
unit by numerical value

VHCL SPEED SIG

[NORMAL/ER-

ROR]

Indicates condition of vehicle speed from automatic back door control unit

MAIN SW

[ON/OFF]

Indicates condition of automatic door main switch

AUTO BD SW

[ON/OFF]

Indicates condition of automatic back door switch

BK DOOR CL SW

[ON/OFF]

Indicates condition of automatic back door close switch

UNLOCK SEN DR

[ON/OFF]

NOTE:
This item is displayed, but cannot be monitored

OPEN SW

[ON/OFF]

Indicates condition of open switch

CLOSE SW

[ON/OFF]

Indicates condition of close switch

HALF LATCH SW

[ON/OFF]

Indicates condition of half latch switch

TOUCH SEN RH

[ON/OFF/OPEN]

Indicates condition of touch sensor RH

TOUCH SEN LH

[ON/OFF/OPEN]

Indicates condition of touch sensor LH

P RANGE IND

[ON/OFF]

Indicates condition of P range signal from TCM

RKE REQ

[OFF/MOVE/

REV]

Indicates condition of remote keyless entry signal from BCM

IGN SW

[ON/OFF]

Indicates condition of IGN power supply

ENCODER A

[LO/HI]

Indicates condition of encoder signal from encoder A

ENCODER B

[LO/HI]

Indicates condition of encoder signal from encoder B

BD OPENER SW

[ON/OFF]

Indicates condition of back door opener switch

UNLOCK SEN BD

[LOCK/

UNLOCK]

NOTE:
This item is displayed, but cannot be monitored

DESTINATION

[JPN/NAM]

Indicates specification of destination of the automatic back door system

HAZARD

[ON/OFF]

Indicates specification of hazard warning

DIAGNOSIS SYSTEM (SLIDING DOOR CONTROL UNIT LH)

DLK-101

< SYSTEM DESCRIPTION >

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

DIAGNOSIS SYSTEM (SLIDING DOOR CONTROL UNIT LH)

CONSULT Function

INFOID:0000000009649016

APPLICATION ITEM

CONSULT performs the following functions via CAN communication with sliding door control unit LH.

DATA MONITOR

NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.

Diagnosis mode

Function description

Self Diagnostic Result

Displays the diagnosis results judged by sliding door control unit LH

CAN Diag Support Monitor

Monitors the reception status of CAN communication viewed from sliding door control 
unit LH

Data Monitor

The sliding door control unit LH input/output signals are displayed

Active Test

The signal used to activate each device are forcibly supplied from sliding door control 
unit LH

Ecu Identification

The sliding door control unit LH part number is displayed

Monitor item

Description

SPEED METER

Vehicle speed signal from combination meter is displayed

ABS SPEED

Vehicle speed signal from ABS actuator and electric unit (control unit) is displayed

MAIN SW

[ON/OFF] status of automatic door main switch, which is judged from automatic door main 
switch signal, is displayed

KNOB LCK SW L

[Lock (OFF)/unlock (ON)] status of sliding door LH, which is judged from sliding door lock/
unlock status signal, is displayed

ONE-TOUCH SW

[Operation (ON)/non-operation (OFF)] status of sliding door one-touch open/close switch 
LH, which is judged from sliding door one-touch open/close switch signal, is displayed

F LID SW

[ON/OFF] status of fuel filler lid status switch, which is judged from fuel filler lid open/close 
status signal, is displayed

B PILLER SW

[Operation (ON)/non-operation (OFF)] status of sliding door open/close switch (rear LH), 
which is judged from sliding door open/close switch (rear LH) signal, is displayed

DRIVER SW

[Operation (ON)/non-operation (OFF)] status of sliding door open/close switch (front LH), 
which is judged from sliding door open/close switch (front LH) signal, is displayed

ACC On SW

[ON, ACC status (ON)/other than ON, ACC (OFF)] status of ignition switch, which is 
judged from ACC signal, is displayed

DOR HAND SW L

[Operation (ON)/non-operation (OFF)] status of sliding door handle LH, which is judged 
from sliding door handle switch signal, is displayed

TOUCH SEN LH

[Pinching detection (ON)/non-detection (OFF)] status of sliding door touch sensor LH, 
which is judged from sliding door touch sensor signal, is displayed

RR-LH DOOR SW

[Open (ON)/close (OFF)] status of sliding door LH, which is judged from sliding door 
switch signal, is displayed

HAF LATC SW L

[Half latch, fully close (OFF)/open (ON)] status of half latch switch, which is judged from 
half latch switch signal, is displayed

P RANGE SW

[P position (ON)/other than P position (OFF)] status of selector lever, which is judged from 
shift position signal, is displayed

BRAKE SW

[Depressed (ON)/non-depressed (OFF)] status of brake pedal, which is judged from stop 
lamp switch signal, is displayed

P BRAKE SW

[Operation (ON)/non-operation (OFF)] status of parking brake, which is judged from park 
brake switch signal, is displayed