|
|
Content .. 1224 1225 1226 1227 ..
TM-134 < DTC/CIRCUIT DIAGNOSIS > [CVT: RE0F09B] SHIFT LOCK SYSTEM SHIFT LOCK SYSTEM Component Function Check INFOID:0000000009650214 1. CHECK CVT SHIFT LOCK OPERATION 1. Turn ignition switch ON. 2. Move selector lever to “P” position. 3. Attempt to shift selector lever to any other position with brake pedal released. Can selector lever be shifted to any other position? YES >> Go to NO >> GO TO 2. 2. CHECK CVT SHIFT LOCK OPERATION Attempt to shift selector lever to any other position with brake pedal depressed. Can the selector lever be shifted to any other position? YES >> INSPECTION END NO >> Go to Diagnosis Procedure INFOID:0000000009650215 1. CHECK POWER SOURCE 1. Turn ignition switch OFF. 2. Disconnect the fuse block (J/B) connector. 3. Turn ignition switch ON. 4. Check the voltage between fuse block (J/B) connector terminal and ground. Is the inspection result normal? YES >> GO TO 2. NO >> Check the following. • 10A fuse [No. 3, located in fuse block (J/B)] 2. CHECK HARNESS BETWEEN FUSE BLOCK (J/B) AND STOP LAMP SWITCH (PART 1) 1. Turn ignition switch OFF. 2. Disconnect the stop lamp switch connector. 3. Check continuity between fuse block (J/B) harness connector terminal and stop lamp switch harness con- Is the inspection result normal? YES >> GO TO 3. NO >> Repair or replace damaged parts. 3. CHECK HARNESS BETWEEN FUSE BLOCK (J/B) AND STOP LAMP SWITCH (PART 2) Check continuity between stop lamp switch harness connector terminal and ground. + - Voltage (Approx.) Fuse block (J/B) Connector Terminal E103 4F Ground 10 – 16 V Fuse block (J/B) Stop lamp switch Continuity Connector Terminal Connector Terminal E103 4F E115 3 Existed |