Nissan Quest E52. Manual - part 27

MANUAL FUNCTION DOES NOT OPERATE

ADP-101

< SYMPTOM DIAGNOSIS >

C

D

E

F

G

H

I

K

L

M

A

B

ADP

N

O

P

Check sliding switch.
Refer to 

ADP-60, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunction parts.

3.

CHECK SLIDING MOTOR

Check sliding motor.
Refer to 

ADP-87, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunction parts.

4.

CONFIRM THE OPERATION

Check the operation again.

Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-42, "Intermittent Incident"

.

NO

>> GO TO 1.

SEAT RECLINING

SEAT RECLINING : Diagnosis Procedure

INFOID:0000000009649694

1.

CHECK RECLINING MECHANISM

Check for the following.
• Mechanism deformation or pinched foreign materials.
• Interference with other parts because of poor installation.
Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunction parts.

2.

CHECK RECLINING SWITCH

Check reclining switch.
Refer to 

ADP-62, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunction parts.

3.

CHECK RECLINING MOTOR

Check reclining motor.
Refer to 

ADP-89, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunction parts.

4.

CONFIRM THE OPERATION

Check the operation again.

Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-42, "Intermittent Incident"

.

NO

>> GO TO 1.

SEAT LIFTING (FRONT)

SEAT LIFTING (FRONT) : Diagnosis Procedure

INFOID:0000000009649695

1.

CHECK LIFTING (FRONT) MECHANISM

Check for the following.
• Mechanism deformation or pinched foreign materials.

ADP-102

< SYMPTOM DIAGNOSIS >

MANUAL FUNCTION DOES NOT OPERATE

• Interference with other parts because of poor installation.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunction parts.

2.

CHECK LIFTING SWITCH (FRONT)

Check lifting switch (front).
Refer to 

ADP-64, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunction parts.

3.

CHECK LIFTING MOTOR (FRONT)

Check lifting motor (front).
Refer to 

ADP-91, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunction parts.

4.

CONFIRM THE OPERATION

Check the operation again.

Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-42, "Intermittent Incident"

.

NO

>> GO TO 1.

SEAT LIFTING (REAR)

SEAT LIFTING (REAR) : Diagnosis Procedure

INFOID:0000000009649696

1.

CHECK LIFTING (REAR) MECHANISM

Check for the following.
• Mechanism deformation or pinched foreign materials.
• Interference with other parts because of poor installation.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunction parts.

2.

CHECK LIFTING SWITCH (REAR)

Check lifting switch (rear).
Refer to 

ADP-66, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunction parts.

3.

CHECK LIFTING MOTOR (REAR)

Check lifting motor (rear).
Refer to 

ADP-93, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunction parts.

4.

CONFIRM THE OPERATION

Check the operation again.

Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-42, "Intermittent Incident"

.

NO

>> GO TO 1.

DOOR MIRROR

MANUAL FUNCTION DOES NOT OPERATE

ADP-103

< SYMPTOM DIAGNOSIS >

C

D

E

F

G

H

I

K

L

M

A

B

ADP

N

O

P

DOOR MIRROR : Diagnosis Procedure

INFOID:0000000009649697

1.

CHECK DOOR MIRROR MECHANISM

Check for the following.
• Mechanism deformation or pinched foreign materials.
• Interference with other parts because of poor installation.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunction parts.

2.

CHECK DOOR MIRROR REMOTE CONTROL SWITCH

Check door mirror remote control switch. Refer to following.
• Mirror switch : Refer to 

ADP-70, "MIRROR SWITCH : Component Function Check"

.

• Changeover switch : Refer to 

ADP-72, "CHANGEOVER SWITCH : Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunction parts.

3.

CHECK DOOR MIRROR MOTOR

Check door mirror motor.
Refer to 

ADP-95, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunction parts.

4.

CONFIRM THE OPERATION

Check the operation again.
Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-42, "Intermittent Incident"

.

NO

>> GO TO 1.

ADP-104

< SYMPTOM DIAGNOSIS >

MEMORY FUNCTION DOES NOT OPERATE

MEMORY FUNCTION DOES NOT OPERATE

ALL COMPONENT

ALL COMPONENT : Diagnosis Procedure

INFOID:0000000009649698

1.

CHECK MANUAL OPERATION

Check manual operation.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunction parts.

2.

PERFORM INITIALIZATION AND MEMORY STORING PROCEDURE

1.

Perform initialization procedure.
Refer to 

ADP-48, "Work Procedure"

.

2.

Perform memory storing procedure.
Refer to 

ADP-49, "Work Procedure"

.

3.

Check memory function.
Refer to 

ADP-15, "MEMORY FUNCTION : System Description"

.

Is the inspection result normal?

YES

>> Memory function is normal.

NO

>> GO TO 3.

3.

CHECK SEAT MEMORY SWITCH

Check seat memory switch.
Refer to 

ADP-68, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Replace seat memory switch.

4.

CONFIRM THE OPERATION

Confirm the operation again.
Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-42, "Intermittent Incident"

.

NO

>> GO TO 1.

SEAT SLIDING

SEAT SLIDING : Diagnosis Procedure

INFOID:0000000009649699

1.

CHECK MANUAL OPERATION

Check manual operation.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Refer to 

ADP-100, "SEAT SLIDING : Diagnosis Procedure"

2.

CHECK SLIDING SENSOR

Check sliding sensor.
Refer to 

ADP-75, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunction parts.

3.

CONFIRM THE OPERATION

Check the operation again.

Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-42, "Intermittent Incident"

.