|
|
P1611 ID DISCORD, IMMU-ECM SEC-35 < DTC/CIRCUIT DIAGNOSIS > [WITH INTELLIGENT KEY SYSTEM] C D E F G H I J L M A B SEC N O P P1611 ID DISCORD, IMMU-ECM Description INFOID:0000000009950105 BCM performs the ID verification with ECM that allows the engine to start. Start the engine if the ID is success- DTC Logic INFOID:0000000009950106 DTC DETECTION LOGIC NOTE: • If DTC P1611 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to DTC CONFIRMATION PROCEDURE 1. PERFORM DTC CONFIRMATION PROCEDURE 1. Turn ignition switch ON under the following conditions. - Selector lever is in the P or N position - Do not depress brake pedal 2. Check “Self-diagnosis result” using CONSULT. Is DTC detected? YES >> Go to NO >> INSPECTION END Diagnosis Procedure INFOID:0000000009950107 1. PERFORM INITIALIZATION Perform initialization of BCM and registration of all Intelligent Keys using CONSULT. YES >> INSPECTION END NO >> GO TO 2. 2. CHECK SELF-DIAGNOSIS RESULT 1. Perform “Self-diagnosis result” of ECM using CONSULT. 2. Erase DTC. 3. Perform DTC confirmation Procedure. Refer to EC-454, "DTC Inspection Priority Chart" Is DTC detected? YES >> GO TO 3. NO >> INSPECTION END 3. REPLACE BCM 1. Replace BCM. Refer to BCS-88, "Removal and Installation" . 2. Perform initialization of BCM and registration of all Intelligent Keys using CONSULT. Can the system be initialized and can the engine be started with registered Intelligent Key? YES >> INSPECTION END NO >> GO TO 4. 4. REPLACE ECM 1. Replace ECM. Refer to SEC-9, "ECM : Special Repair Requirement" . DTC No. Trouble diagnosis name DTC detecting condition Possible cause P1611 ID DISCORD, IMMU- The ID verification results between BCM and ECM • BCM |